[PATCH v1 7/7] i2c: i801: convert to use common P2SB accessor

From: Andy Shevchenko
Date: Mon Mar 08 2021 - 07:22:13 EST


Since we have a common P2SB accessor in tree we may use it instead of
open coded variants.

Replace custom code by pci_p2sb_bar() call.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/i2c/busses/Kconfig | 1 +
drivers/i2c/busses/i2c-i801.c | 40 ++++++++---------------------------
drivers/pci/pci-p2sb.c | 6 ++++++
3 files changed, 16 insertions(+), 31 deletions(-)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 05ebf7546e3f..ffd3007f888c 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -101,6 +101,7 @@ config I2C_HIX5HD2
config I2C_I801
tristate "Intel 82801 (ICH/PCH)"
depends on PCI
+ select PCI_P2SB if X86
select CHECK_SIGNATURE if X86 && DMI
select I2C_SMBUS
help
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 4acee6f9e5a3..23b43de9786a 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -90,6 +90,7 @@
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/pci.h>
+#include <linux/pci-p2sb.h>
#include <linux/kernel.h>
#include <linux/stddef.h>
#include <linux/delay.h>
@@ -136,7 +137,6 @@
#define TCOBASE 0x050
#define TCOCTL 0x054

-#define SBREG_BAR 0x10
#define SBREG_SMBCTRL 0xc6000c
#define SBREG_SMBCTRL_DNV 0xcf000c

@@ -1524,52 +1524,30 @@ static const struct itco_wdt_platform_data spt_tco_platform_data = {
.version = 4,
};

-static DEFINE_SPINLOCK(p2sb_spinlock);
-
static struct platform_device *
i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
struct resource *tco_res)
{
struct resource *res;
unsigned int devfn;
- u64 base64_addr;
- u32 base_addr;
- u8 hidden;
+ int ret;

/*
* We must access the NO_REBOOT bit over the Primary to Sideband
- * bridge (P2SB). The BIOS prevents the P2SB device from being
- * enumerated by the PCI subsystem, so we need to unhide/hide it
- * to lookup the P2SB BAR.
+ * bridge (P2SB).
*/
- spin_lock(&p2sb_spinlock);

devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 1);

- /* Unhide the P2SB device, if it is hidden */
- pci_bus_read_config_byte(pci_dev->bus, devfn, 0xe1, &hidden);
- if (hidden)
- pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, 0x0);
-
- pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR, &base_addr);
- base64_addr = base_addr & 0xfffffff0;
-
- pci_bus_read_config_dword(pci_dev->bus, devfn, SBREG_BAR + 0x4, &base_addr);
- base64_addr |= (u64)base_addr << 32;
-
- /* Hide the P2SB device, if it was hidden before */
- if (hidden)
- pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, hidden);
- spin_unlock(&p2sb_spinlock);
-
res = &tco_res[1];
+ ret = pci_p2sb_bar(pci_dev, devfn, res);
+ if (ret)
+ return ERR_PTR(ret);
+
if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS)
- res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL_DNV;
+ res->start += SBREG_SMBCTRL_DNV;
else
- res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL;
-
- res->end = res->start + 3;
- res->flags = IORESOURCE_MEM;
+ res->start += SBREG_SMBCTRL;

return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
tco_res, 2, &spt_tco_platform_data,
diff --git a/drivers/pci/pci-p2sb.c b/drivers/pci/pci-p2sb.c
index 68d7dad48cdb..7f6bc7d4482a 100644
--- a/drivers/pci/pci-p2sb.c
+++ b/drivers/pci/pci-p2sb.c
@@ -22,6 +22,12 @@

static const struct x86_cpu_id p2sb_cpu_ids[] = {
X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT, PCI_DEVFN(13, 0)),
+ X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_D, PCI_DEVFN(31, 1)),
+ X86_MATCH_INTEL_FAM6_MODEL(ATOM_SILVERMONT_D, PCI_DEVFN(31, 1)),
+ X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE, PCI_DEVFN(31, 1)),
+ X86_MATCH_INTEL_FAM6_MODEL(KABYLAKE_L, PCI_DEVFN(31, 1)),
+ X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE, PCI_DEVFN(31, 1)),
+ X86_MATCH_INTEL_FAM6_MODEL(SKYLAKE_L, PCI_DEVFN(31, 1)),
{}
};

--
2.30.1