Re: [PATCH AUTOSEL 5.11 09/12] nvme-pci: mark Kingston SKC2000 as not supporting the deepest power state

[Böszörményi Zoltán]

Hi,

2021. 03. 07. 14:57 keltezéssel, Sasha Levin írta:
> From: Zoltán Böszörményi <zboszor@xxxxxxxxx>
>
> [ Upstream commit dc22c1c058b5c4fe967a20589e36f029ee42a706 ]
>
> My 2TB SKC2000 showed the exact same symptoms that were provided
> in 538e4a8c57 ("nvme-pci: avoid the deepest sleep state on
> Kingston A2000 SSDs"), i.e. a complete NVME lockup that needed
> cold boot to get it back.
>
> According to some sources, the A2000 is simply a rebadged
> SKC2000 with a slightly optimized firmware.
>
> Adding the SKC2000 PCI ID to the quirk list with the same workaround
> as the A2000 made my laptop survive a 5 hours long Yocto bootstrap
> buildfest which reliably triggered the SSD lockup previously.
>
> Signed-off-by: Zoltán Böszörményi <zboszor@xxxxxxxxx>
> Signed-off-by: Christoph Hellwig <hch@xxxxxx>
> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>

Thanks for picking it up for stable.

May I suggest to include it in 5.10.x as well?
Originally this patch was tested on 5.10.17.

Best regards,
Zoltán Böszörményi

> ---
>   drivers/nvme/host/pci.c | 2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
> index 7a38d764b486..14c5b52400ef 100644
> --- a/drivers/nvme/host/pci.c
> +++ b/drivers/nvme/host/pci.c
> @@ -3262,6 +3262,8 @@ static const struct pci_device_id nvme_id_table[] = {
>   		.driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, },
>   	{ PCI_DEVICE(0x1d97, 0x2263),   /* SPCC */
>   		.driver_data = NVME_QUIRK_DISABLE_WRITE_ZEROES, },
> +	{ PCI_DEVICE(0x2646, 0x2262),   /* KINGSTON SKC2000 NVMe SSD */
> +		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
>   	{ PCI_DEVICE(0x2646, 0x2263),   /* KINGSTON A2000 NVMe SSD  */
>   		.driver_data = NVME_QUIRK_NO_DEEPEST_PS, },
>   	{ PCI_DEVICE(PCI_VENDOR_ID_APPLE, 0x2001),