[PATCH 1/3] net: davicom: Fix regulator not turned off on failed probe

[Paul Cercueil]

When the probe fails or requests to be defered, we must disable the
regulator that was previously enabled.

Fixes: 7994fe55a4a2 ("dm9000: Add regulator and reset support to dm9000")
Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
---
 drivers/net/ethernet/davicom/dm9000.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index 3fdc70dab5c1..ae744826bb9e 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -1449,7 +1449,7 @@ dm9000_probe(struct platform_device *pdev)
 		if (ret) {
 			dev_err(dev, "failed to request reset gpio %d: %d\n",
 				reset_gpios, ret);
-			return -ENODEV;
+			goto out_regulator_disable;
 		}
 
 		/* According to manual PWRST# Low Period Min 1ms */
@@ -1461,8 +1461,10 @@ dm9000_probe(struct platform_device *pdev)
 
 	if (!pdata) {
 		pdata = dm9000_parse_dt(&pdev->dev);
-		if (IS_ERR(pdata))
-			return PTR_ERR(pdata);
+		if (IS_ERR(pdata)) {
+			ret = PTR_ERR(pdata);
+			goto out_regulator_disable;
+		}
 	}
 
 	/* Init network device */
@@ -1703,6 +1705,10 @@ dm9000_probe(struct platform_device *pdev)
 	dm9000_release_board(pdev, db);
 	free_netdev(ndev);
 
+out_regulator_disable:
+	if (!IS_ERR(power))
+		regulator_disable(power);
+
 	return ret;
 }
 
-- 
2.30.1