[PATCH 2/3] drm/bridge: ti-sn65dsi86: Move code in prep for EDID read fix

[Douglas Anderson]

This patch is _only_ code motion to prepare for the patch
("drm/bridge: ti-sn65dsi86: Properly get the EDID, but only if
refclk") and make it easier to understand.

Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---

 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 196 +++++++++++++-------------
 1 file changed, 98 insertions(+), 98 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index 942019842ff4..491c9c4f32d1 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -345,6 +345,104 @@ static int ti_sn_bridge_parse_regulators(struct ti_sn_bridge *pdata)
 				       pdata->supplies);
 }
 
+static u32 ti_sn_bridge_get_dsi_freq(struct ti_sn_bridge *pdata)
+{
+	u32 bit_rate_khz, clk_freq_khz;
+	struct drm_display_mode *mode =
+		&pdata->bridge.encoder->crtc->state->adjusted_mode;
+
+	bit_rate_khz = mode->clock *
+			mipi_dsi_pixel_format_to_bpp(pdata->dsi->format);
+	clk_freq_khz = bit_rate_khz / (pdata->dsi->lanes * 2);
+
+	return clk_freq_khz;
+}
+
+/* clk frequencies supported by bridge in Hz in case derived from REFCLK pin */
+static const u32 ti_sn_bridge_refclk_lut[] = {
+	12000000,
+	19200000,
+	26000000,
+	27000000,
+	38400000,
+};
+
+/* clk frequencies supported by bridge in Hz in case derived from DACP/N pin */
+static const u32 ti_sn_bridge_dsiclk_lut[] = {
+	468000000,
+	384000000,
+	416000000,
+	486000000,
+	460800000,
+};
+
+static void ti_sn_bridge_set_refclk_freq(struct ti_sn_bridge *pdata)
+{
+	int i;
+	u32 refclk_rate;
+	const u32 *refclk_lut;
+	size_t refclk_lut_size;
+
+	if (pdata->refclk) {
+		refclk_rate = clk_get_rate(pdata->refclk);
+		refclk_lut = ti_sn_bridge_refclk_lut;
+		refclk_lut_size = ARRAY_SIZE(ti_sn_bridge_refclk_lut);
+		clk_prepare_enable(pdata->refclk);
+	} else {
+		refclk_rate = ti_sn_bridge_get_dsi_freq(pdata) * 1000;
+		refclk_lut = ti_sn_bridge_dsiclk_lut;
+		refclk_lut_size = ARRAY_SIZE(ti_sn_bridge_dsiclk_lut);
+	}
+
+	/* for i equals to refclk_lut_size means default frequency */
+	for (i = 0; i < refclk_lut_size; i++)
+		if (refclk_lut[i] == refclk_rate)
+			break;
+
+	regmap_update_bits(pdata->regmap, SN_DPPLL_SRC_REG, REFCLK_FREQ_MASK,
+			   REFCLK_FREQ(i));
+}
+
+static void ti_sn_bridge_post_disable(struct drm_bridge *bridge)
+{
+	struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge);
+
+	clk_disable_unprepare(pdata->refclk);
+
+	pm_runtime_put_sync(pdata->dev);
+}
+
+static void ti_sn_bridge_pre_enable(struct drm_bridge *bridge)
+{
+	struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge);
+
+	pm_runtime_get_sync(pdata->dev);
+
+	/* configure bridge ref_clk */
+	ti_sn_bridge_set_refclk_freq(pdata);
+
+	/*
+	 * HPD on this bridge chip is a bit useless.  This is an eDP bridge
+	 * so the HPD is an internal signal that's only there to signal that
+	 * the panel is done powering up.  ...but the bridge chip debounces
+	 * this signal by between 100 ms and 400 ms (depending on process,
+	 * voltage, and temperate--I measured it at about 200 ms).  One
+	 * particular panel asserted HPD 84 ms after it was powered on meaning
+	 * that we saw HPD 284 ms after power on.  ...but the same panel said
+	 * that instead of looking at HPD you could just hardcode a delay of
+	 * 200 ms.  We'll assume that the panel driver will have the hardcoded
+	 * delay in its prepare and always disable HPD.
+	 *
+	 * If HPD somehow makes sense on some future panel we'll have to
+	 * change this to be conditional on someone specifying that HPD should
+	 * be used.
+	 */
+	regmap_update_bits(pdata->regmap, SN_HPD_DISABLE_REG, HPD_DISABLE,
+			   HPD_DISABLE);
+
+	drm_panel_prepare(pdata->panel);
+}
+
 static int ti_sn_bridge_attach(struct drm_bridge *bridge,
 			       enum drm_bridge_attach_flags flags)
 {
@@ -443,64 +541,6 @@ static void ti_sn_bridge_disable(struct drm_bridge *bridge)
 	drm_panel_unprepare(pdata->panel);
 }
 
-static u32 ti_sn_bridge_get_dsi_freq(struct ti_sn_bridge *pdata)
-{
-	u32 bit_rate_khz, clk_freq_khz;
-	struct drm_display_mode *mode =
-		&pdata->bridge.encoder->crtc->state->adjusted_mode;
-
-	bit_rate_khz = mode->clock *
-			mipi_dsi_pixel_format_to_bpp(pdata->dsi->format);
-	clk_freq_khz = bit_rate_khz / (pdata->dsi->lanes * 2);
-
-	return clk_freq_khz;
-}
-
-/* clk frequencies supported by bridge in Hz in case derived from REFCLK pin */
-static const u32 ti_sn_bridge_refclk_lut[] = {
-	12000000,
-	19200000,
-	26000000,
-	27000000,
-	38400000,
-};
-
-/* clk frequencies supported by bridge in Hz in case derived from DACP/N pin */
-static const u32 ti_sn_bridge_dsiclk_lut[] = {
-	468000000,
-	384000000,
-	416000000,
-	486000000,
-	460800000,
-};
-
-static void ti_sn_bridge_set_refclk_freq(struct ti_sn_bridge *pdata)
-{
-	int i;
-	u32 refclk_rate;
-	const u32 *refclk_lut;
-	size_t refclk_lut_size;
-
-	if (pdata->refclk) {
-		refclk_rate = clk_get_rate(pdata->refclk);
-		refclk_lut = ti_sn_bridge_refclk_lut;
-		refclk_lut_size = ARRAY_SIZE(ti_sn_bridge_refclk_lut);
-		clk_prepare_enable(pdata->refclk);
-	} else {
-		refclk_rate = ti_sn_bridge_get_dsi_freq(pdata) * 1000;
-		refclk_lut = ti_sn_bridge_dsiclk_lut;
-		refclk_lut_size = ARRAY_SIZE(ti_sn_bridge_dsiclk_lut);
-	}
-
-	/* for i equals to refclk_lut_size means default frequency */
-	for (i = 0; i < refclk_lut_size; i++)
-		if (refclk_lut[i] == refclk_rate)
-			break;
-
-	regmap_update_bits(pdata->regmap, SN_DPPLL_SRC_REG, REFCLK_FREQ_MASK,
-			   REFCLK_FREQ(i));
-}
-
 static void ti_sn_bridge_set_dsi_rate(struct ti_sn_bridge *pdata)
 {
 	unsigned int bit_rate_mhz, clk_freq_mhz;
@@ -821,46 +861,6 @@ static void ti_sn_bridge_enable(struct drm_bridge *bridge)
 	drm_panel_enable(pdata->panel);
 }
 
-static void ti_sn_bridge_pre_enable(struct drm_bridge *bridge)
-{
-	struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge);
-
-	pm_runtime_get_sync(pdata->dev);
-
-	/* configure bridge ref_clk */
-	ti_sn_bridge_set_refclk_freq(pdata);
-
-	/*
-	 * HPD on this bridge chip is a bit useless.  This is an eDP bridge
-	 * so the HPD is an internal signal that's only there to signal that
-	 * the panel is done powering up.  ...but the bridge chip debounces
-	 * this signal by between 100 ms and 400 ms (depending on process,
-	 * voltage, and temperate--I measured it at about 200 ms).  One
-	 * particular panel asserted HPD 84 ms after it was powered on meaning
-	 * that we saw HPD 284 ms after power on.  ...but the same panel said
-	 * that instead of looking at HPD you could just hardcode a delay of
-	 * 200 ms.  We'll assume that the panel driver will have the hardcoded
-	 * delay in its prepare and always disable HPD.
-	 *
-	 * If HPD somehow makes sense on some future panel we'll have to
-	 * change this to be conditional on someone specifying that HPD should
-	 * be used.
-	 */
-	regmap_update_bits(pdata->regmap, SN_HPD_DISABLE_REG, HPD_DISABLE,
-			   HPD_DISABLE);
-
-	drm_panel_prepare(pdata->panel);
-}
-
-static void ti_sn_bridge_post_disable(struct drm_bridge *bridge)
-{
-	struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge);
-
-	clk_disable_unprepare(pdata->refclk);
-
-	pm_runtime_put_sync(pdata->dev);
-}
-
 static const struct drm_bridge_funcs ti_sn_bridge_funcs = {
 	.attach = ti_sn_bridge_attach,
 	.pre_enable = ti_sn_bridge_pre_enable,
-- 
2.30.1.766.gb4fecdf3b7-goog