[PATCH v4 1/2] dt-bindings: display: bridge: Add Chipone ICN6211 bindings

[Jagan Teki]

ICN6211 is MIPI-DSI to RGB Converter bridge from Chipone.

It has a flexible configuration of MIPI DSI signal input and
produces RGB565, RGB666, RGB888 output format.

Add dt-bingings for it.

Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
---
Changes for v4:
- fixed Laurent comments
- added regulators
- replace reset with EN
- fixed warnings pointed by Robert
Changes for v3:
- updated to new dt-bindings style

 .../display/bridge/chipone,icn6211.yaml       | 99 +++++++++++++++++++
 MAINTAINERS                                   |  5 +
 2 files changed, 104 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
new file mode 100644
index 000000000000..62c3bd4cb28d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/chipone,icn6211.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Chipone ICN6211 MIPI-DSI to RGB Converter bridge
+
+maintainers:
+  - Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
+
+description: |
+  ICN6211 is MIPI-DSI to RGB Converter bridge from chipone.
+
+  It has a flexible configuration of MIPI DSI signal input and
+  produce RGB565, RGB666, RGB888 output format.
+
+properties:
+  compatible:
+    enum:
+      - chipone,icn6211
+
+  reg:
+    maxItems: 1
+    description: virtual channel number of a DSI peripheral
+
+  enable-gpios:
+    description: Bridge EN pin, chip is reset when EN is low.
+
+  vdd1-supply:
+    description: A 1.8V/2.5V/3.3V supply that power the MIPI RX.
+
+  vdd2-supply:
+    description: A 1.8V/2.5V/3.3V supply that power the PLL.
+
+  vdd3-supply:
+    description: A 1.8V/2.5V/3.3V supply that power the RGB output.
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DSI input
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Video port for MIPI DPI output (panel or connector).
+
+    required:
+      - port@0
+      - port@1
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      bridge@0 {
+        compatible = "chipone,icn6211";
+        reg = <0>;
+        enable-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* LCD-RST: PL5 */
+
+        ports {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          port@0 {
+            reg = <0>;
+
+            bridge_in_dsi: endpoint {
+              remote-endpoint = <&dsi_out_bridge>;
+            };
+          };
+
+          port@1 {
+            reg = <1>;
+
+            bridge_out_panel: endpoint {
+              remote-endpoint = <&panel_out_bridge>;
+            };
+          };
+        };
+      };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 9d241b832aae..065cbdc889d3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5529,6 +5529,11 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/display/panel/boe,himax8279d.yaml
 F:	drivers/gpu/drm/panel/panel-boe-himax8279d.c
 
+DRM DRIVER FOR CHIPONE ICN6211 MIPI-DSI to RGB CONVERTER BRIDGE
+M:	Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>
+S:	Maintained
+F:	Documentation/devicetree/bindings/display/bridge/chipone,icn6211.yaml
+
 DRM DRIVER FOR FARADAY TVE200 TV ENCODER
 M:	Linus Walleij <linus.walleij@xxxxxxxxxx>
 S:	Maintained
-- 
2.25.1