Re: [PATCH v3 1/2] dt-bindings: iommu: add bindings for sprd iommu

From: Chunyan Zhang
Date: Thu Mar 04 2021 - 02:14:08 EST


Hi Robin,

On Tue, 16 Feb 2021 at 23:10, Robin Murphy <robin.murphy@xxxxxxx> wrote:
>
> >>>
> >>> On Wed, Feb 03, 2021 at 05:07:26PM +0800, Chunyan Zhang wrote:
> >>>> From: Chunyan Zhang <chunyan.zhang@xxxxxxxxxx>
> >>>>
> >>>> This iommu module can be used by Unisoc's multimedia devices, such as
> >>>> display, Image codec(jpeg) and a few signal processors, including
> >>>> VSP(video), GSP(graphic), ISP(image), and CPP(camera pixel processor), etc.
> >>>>
> >>>> Signed-off-by: Chunyan Zhang <chunyan.zhang@xxxxxxxxxx>
> >>>> ---
> >>>> .../devicetree/bindings/iommu/sprd,iommu.yaml | 72 +++++++++++++++++++
> >>>> 1 file changed, 72 insertions(+)
> >>>> create mode 100644 Documentation/devicetree/bindings/iommu/sprd,iommu.yaml
> >>>>
> >>>> diff --git a/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml b/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml
> >>>> new file mode 100644
> >>>> index 000000000000..4fc99e81fa66
> >>>> --- /dev/null
> >>>> +++ b/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml
> >>>> @@ -0,0 +1,72 @@
> >>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> >>>> +# Copyright 2020 Unisoc Inc.
> >>>> +%YAML 1.2
> >>>> +---
> >>>> +$id: http://devicetree.org/schemas/iommu/sprd,iommu.yaml#
> >>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >>>> +
> >>>> +title: Unisoc IOMMU and Multi-media MMU
> >>>> +
> >>>> +maintainers:
> >>>> + - Chunyan Zhang <zhang.lyra@xxxxxxxxx>
> >>>> +
> >>>> +properties:
> >>>> + compatible:
> >>>> + enum:
> >>>> + - sprd,iommu-v1
> >>>> +
> >>>> + "#iommu-cells":
> >>>> + const: 0
> >>>> + description:
> >>>> + Unisoc IOMMUs are all single-master IOMMU devices, therefore no
> >>>> + additional information needs to associate with its master device.
> >>>> + Please refer to the generic bindings document for more details,
> >>>> + Documentation/devicetree/bindings/iommu/iommu.txt
> >>>> +
> >>>> + reg:
> >>>> + maxItems: 1
> >>>> + description:
> >>>> + Not required if 'sprd,iommu-regs' is defined.
> >>>> +
> >>>> + clocks:
> >>>> + description:
> >>>> + Reference to a gate clock phandle, since access to some of IOMMUs are
> >>>> + controlled by gate clock, but this is not required.
> >>>> +
> >>>> + sprd,iommu-regs:
> >>>> + $ref: /schemas/types.yaml#/definitions/phandle-array
> >>>> + description:
> >>>> + Reference to a syscon phandle plus 1 cell, the syscon defines the
> >>>> + register range used by the iommu and the media device, the cell
> >>>> + defines the offset for iommu registers. Since iommu module shares
> >>>> + the same register range with the media device which uses it.
> >>>> +
> >>>> +required:
> >>>> + - compatible
> >>>> + - "#iommu-cells"
>
> OK, so apparently the hardware is not quite as trivial as my initial
> impression, and you should have interrupts as well.

I've checked with my colleagues for this issue. And like I explained
before, one sprd IOMMU serves one master device only, so interrupts
are handled by master devices rather than IOMMUs.

Chunyan