RE: Re: [PATCH v25 4/4] scsi: ufs: Add HPB 2.0 support

[Daejun Park]

> > 
> >  static void __ufshpb_evict_region(struct ufshpb_lu *hpb,
> >                                    struct ufshpb_region *rgn)
> >  {
> > @@ -1209,6 +1579,16 @@ static void ufshpb_lu_parameter_init(struct
> > ufs_hba *hba,
> >          u32 entries_per_rgn;
> >          u64 rgn_mem_size, tmp;
> >  
> > +        /* for pre_req */
> > +        if (hpb_dev_info->max_hpb_single_cmd)
> > +                hpb->pre_req_min_tr_len = hpb_dev_info-
> > >max_hpb_single_cmd;
> > +        else
> > +                hpb->pre_req_min_tr_len = HPB_MULTI_CHUNK_LOW;
>  
>  
> Here is not correct. according to Spec:
>  
> The size is calculated as ( bMAX_DATA_SIZE_FOR_HPB_SINGLE_CMD +1 )*4KB.
> 00h: 4KB
> 01h: 8KB
> 02h: 12KB
> 03h: 16KB
> ...
> FEh: 1020KB
> FFh: 1024KB
>  
> so, here if hpb_dev_info->max_hpb_single_cmd is 0x00, means 4KB, not
> 36KB.

OK,
 
> > +        hpb->pre_req_max_tr_len = max(HPB_MULTI_CHUNK_HIGH,
> > +                                      hpb->pre_req_min_tr_len);
> > +
> > 
> >  out:
> >          /* All LUs are initialized */
> >          if (atomic_dec_and_test(&hba->ufshpb_dev.slave_conf_cnt))
> > @@ -1812,8 +2307,9 @@ void ufshpb_get_geo_info(struct ufs_hba *hba,
> > u8 *geo_buf)
> >  void ufshpb_get_dev_info(struct ufs_hba *hba, u8 *desc_buf)
> >  {
> >          struct ufshpb_dev_info *hpb_dev_info = &hba->ufshpb_dev;
> > -        int version;
> > +        int version, ret;
> >          u8 hpb_mode;
> > +        u32 max_hpb_sigle_cmd = 0;
> >  
> >          hpb_mode = desc_buf[DEVICE_DESC_PARAM_HPB_CONTROL];
> >          if (hpb_mode == HPB_HOST_CONTROL) {
> > @@ -1824,13 +2320,27 @@ void ufshpb_get_dev_info(struct ufs_hba *hba,
> > u8 *desc_buf)
> >          }
> >  
> >          version = get_unaligned_be16(desc_buf +
> > DEVICE_DESC_PARAM_HPB_VER);
> > -        if (version != HPB_SUPPORT_VERSION) {
> > +        if ((version != HPB_SUPPORT_VERSION) &&
> > +            (version != HPB_SUPPORT_LEGACY_VERSION)) {
> >                  dev_err(hba->dev, "%s: HPB %x version is not
> > supported.\n",
> >                          __func__, version);
> >                  hpb_dev_info->hpb_disabled = true;
> >                  return;
> >          }
> >  
> > +        if (version == HPB_SUPPORT_LEGACY_VERSION)
> > +                hpb_dev_info->is_legacy = true;
> > +
> > +        pm_runtime_get_sync(hba->dev);
> > +        ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
> > +                QUERY_ATTR_IDN_MAX_HPB_SINGLE_CMD, 0, 0,
> > &max_hpb_sigle_cmd);
> > +        pm_runtime_put_sync(hba->dev);
> > +
> > +        if (ret)
> > +                dev_err(hba->dev, "%s: idn: read max size of single hpb
> > cmd query request failed",
> > +                        __func__);
> > +        hpb_dev_info->max_hpb_single_cmd = max_hpb_sigle_cmd;
> > +
>  
> Here you didn't add 1, if you read out the
> QUERY_ATTR_IDN_MAX_HPB_SINGLE_CMD == 7, means device can support
> maximum HPB Data size for using single HPB command is 7+1
> ((7+1)*4=32KB), not 7.

OK, Done.

Thanks,
Daejun