RE: [PATCH 2/7] clk: renesas: r8a77965: Add DAB clock

From: Fabrizio Castro
Date: Mon Mar 01 2021 - 10:02:33 EST


Hi Laurent,

Thanks for your feedback!

> From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> Sent: 26 February 2021 12:49
> Subject: Re: [PATCH 2/7] clk: renesas: r8a77965: Add DAB clock
>
> Hi Fabrizio,
>
> Thank you for the patch.
>
> On Fri, Feb 26, 2021 at 09:45:20AM +0100, Geert Uytterhoeven wrote:
> > On Thu, Feb 25, 2021 at 11:53 PM Fabrizio Castro wrote:
> > > This patch adds the DAB clock to the R8A77965 SoC.
> > >
> > > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
> >
> > Thanks for your patch!
> >
> > > --- a/drivers/clk/renesas/r8a77965-cpg-mssr.c
> > > +++ b/drivers/clk/renesas/r8a77965-cpg-mssr.c
> > > @@ -250,6 +250,7 @@ static const struct mssr_mod_clk
> r8a77965_mod_clks[] __initconst = {
> > > DEF_MOD("ssi2", 1013, MOD_CLK_ID(1005)),
> > > DEF_MOD("ssi1", 1014, MOD_CLK_ID(1005)),
> > > DEF_MOD("ssi0", 1015, MOD_CLK_ID(1005)),
> > > + DEF_MOD("dab", 1016, R8A77965_CLK_S0D6),
> >
> > Unfortunately this bit is not documented in the R-Car Gen3 Hardware
> > User's Manual, so I have to trust you on this.
> >
> > While it's not unusual that the same module on R-Car E3 and M3-N
> > has different parent clocks, it does strike me as odd that S0D6 on M3-N
> > runs at 133 MHz, while S3D1 on E3 runs at 266 MHz.
> > Probably it doesn't matter that much, as your driver doesn't care
> > about the actual clock rate.
>
> I have the exact same concerns, here and for 1/7.

I hear you, but you know how these sort of things go, a bit was left
behind, now they are aware of this bit missing from the documentation
and at some point they will release a document addressing this particular
point. Meanwhile, we have received written confirmation for this, so
it should be okay.

Thanks,
Fab

>
> > > DEF_MOD("scu-all", 1017, R8A77965_CLK_S3D4),
> > > DEF_MOD("scu-dvc1", 1018, MOD_CLK_ID(1017)),
> > > DEF_MOD("scu-dvc0", 1019, MOD_CLK_ID(1017)),
>
> --
> Regards,
>
> Laurent Pinchart