Re: [PATCH] vdpa/mlx5: set_features should allow reset to zero

[Michael S. Tsirkin]

On Tue, Feb 23, 2021 at 05:46:20PM +0800, Jason Wang wrote:
> 
> On 2021/2/23 下午5:25, Michael S. Tsirkin wrote:
> > On Mon, Feb 22, 2021 at 09:09:28AM -0800, Si-Wei Liu wrote:
> > > 
> > > On 2/21/2021 8:14 PM, Jason Wang wrote:
> > > > On 2021/2/19 7:54 下午, Si-Wei Liu wrote:
> > > > > Commit 452639a64ad8 ("vdpa: make sure set_features is invoked
> > > > > for legacy") made an exception for legacy guests to reset
> > > > > features to 0, when config space is accessed before features
> > > > > are set. We should relieve the verify_min_features() check
> > > > > and allow features reset to 0 for this case.
> > > > > 
> > > > > It's worth noting that not just legacy guests could access
> > > > > config space before features are set. For instance, when
> > > > > feature VIRTIO_NET_F_MTU is advertised some modern driver
> > > > > will try to access and validate the MTU present in the config
> > > > > space before virtio features are set.
> > > > 
> > > > This looks like a spec violation:
> > > > 
> > > > "
> > > > 
> > > > The following driver-read-only field, mtu only exists if
> > > > VIRTIO_NET_F_MTU is set. This field specifies the maximum MTU for the
> > > > driver to use.
> > > > "
> > > > 
> > > > Do we really want to workaround this?
> > > Isn't the commit 452639a64ad8 itself is a workaround for legacy guest?
> > > 
> > > I think the point is, since there's legacy guest we'd have to support, this
> > > host side workaround is unavoidable. Although I agree the violating driver
> > > should be fixed (yes, it's in today's upstream kernel which exists for a
> > > while now).
> > Oh  you are right:
> > 
> > 
> > static int virtnet_validate(struct virtio_device *vdev)
> > {
> >          if (!vdev->config->get) {
> >                  dev_err(&vdev->dev, "%s failure: config access disabled\n",
> >                          __func__);
> >                  return -EINVAL;
> >          }
> > 
> >          if (!virtnet_validate_features(vdev))
> >                  return -EINVAL;
> > 
> >          if (virtio_has_feature(vdev, VIRTIO_NET_F_MTU)) {
> >                  int mtu = virtio_cread16(vdev,
> >                                           offsetof(struct virtio_net_config,
> >                                                    mtu));
> >                  if (mtu < MIN_MTU)
> >                          __virtio_clear_bit(vdev, VIRTIO_NET_F_MTU);
> 
> 
> I wonder why not simply fail here?

Back in 2016 it went like this:

	On Thu, Jun 02, 2016 at 05:10:59PM -0400, Aaron Conole wrote:
	> +     if (virtio_has_feature(vdev, VIRTIO_NET_F_MTU)) {
	> +             dev->mtu = virtio_cread16(vdev,
	> +                                       offsetof(struct virtio_net_config,
	> +                                                mtu));
	> +     }
	> +
	>       if (vi->any_header_sg)
	>               dev->needed_headroom = vi->hdr_len;
	> 

	One comment though: I think we should validate the mtu.
	If it's invalid, clear VIRTIO_NET_F_MTU and ignore.


Too late at this point :)

I guess it's a way to tell device "I can not live with this MTU",
device can fail FEATURES_OK if it wants to. MIN_MTU
is an internal linux thing and at the time I felt it's better to
try to make progress.


> 
> >          }
> > 
> >          return 0;
> > }
> > 
> > And the spec says:
> > 
> > 
> > The driver MUST follow this sequence to initialize a device:
> > 1. Reset the device.
> > 2. Set the ACKNOWLEDGE status bit: the guest OS has noticed the device.
> > 3. Set the DRIVER status bit: the guest OS knows how to drive the device.
> > 4. Read device feature bits, and write the subset of feature bits understood by the OS and driver to the
> > device. During this step the driver MAY read (but MUST NOT write) the device-specific configuration
> > fields to check that it can support the device before accepting it.
> > 5. Set the FEATURES_OK status bit. The driver MUST NOT accept new feature bits after this step.
> > 6. Re-read device status to ensure the FEATURES_OK bit is still set: otherwise, the device does not
> > support our subset of features and the device is unusable.
> > 7. Perform device-specific setup, including discovery of virtqueues for the device, optional per-bus setup,
> > reading and possibly writing the device’s virtio configuration space, and population of virtqueues.
> > 8. Set the DRIVER_OK status bit. At this point the device is “live”.
> > 
> > 
> > Item 4 on the list explicitly allows reading config space before
> > FEATURES_OK.
> > 
> > I conclude that VIRTIO_NET_F_MTU is set means "set in device features".
> 
> 
> So this probably need some clarification. "is set" is used many times in the
> spec that has different implications.
> 
> Thanks
> 
> 
> > 
> > Generally it is worth going over feature dependent config fields
> > and checking whether they should be present when device feature is set
> > or when feature bit has been negotiated, and making this clear.
> >