[PATCH v1 1/4] ACPI: processor: Get rid of ACPICA message printing

From: Rafael J. Wysocki
Date: Mon Feb 22 2021 - 14:06:24 EST


From: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

The ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() macros are used for
message printing in the ACPICA code and they should not be used
elsewhere. Special configuration (either kernel command line or
sysfs-based) is needed to see the messages printed by them and
the format of those messages is also special and convoluted.

For this reason, replace all of the ACPI_DEBUG_PRINT() and
ACPI_EXCEPTION() instances in the ACPI processor driver with
corresponding dev_*(), acpi_handle_*() and pr_*() calls depending
on the context in which they appear.

Also drop the ACPI_PROCESSOR_COMPONENT definition that is not going
to be necessary any more.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
---
Documentation/firmware-guide/acpi/debug.rst | 1
drivers/acpi/acpi_processor.c | 33 +++-----
drivers/acpi/processor_driver.c | 6 -
drivers/acpi/processor_idle.c | 34 +++-----
drivers/acpi/processor_pdc.c | 7 -
drivers/acpi/processor_perflib.c | 41 +++++-----
drivers/acpi/processor_throttling.c | 110 ++++++++++++++--------------
drivers/acpi/sysfs.c | 1
include/acpi/acpi_drivers.h | 1
9 files changed, 108 insertions(+), 126 deletions(-)

Index: linux-pm/drivers/acpi/acpi_processor.c
===================================================================
--- linux-pm.orig/drivers/acpi/acpi_processor.c
+++ linux-pm/drivers/acpi/acpi_processor.c
@@ -22,10 +22,6 @@

#include "internal.h"

-#define _COMPONENT ACPI_PROCESSOR_COMPONENT
-
-ACPI_MODULE_NAME("processor");
-
DEFINE_PER_CPU(struct acpi_processor *, processors);
EXPORT_PER_CPU_SYMBOL(processors);

@@ -51,19 +47,19 @@ static int acpi_processor_errata_piix4(s

switch (dev->revision) {
case 0:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
+ dev_dbg(&dev->dev, "Found PIIX4 A-step\n");
break;
case 1:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 B-step\n"));
+ dev_dbg(&dev->dev, "Found PIIX4 B-step\n");
break;
case 2:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4E\n"));
+ dev_dbg(&dev->dev, "Found PIIX4E\n");
break;
case 3:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4M\n"));
+ dev_dbg(&dev->dev, "Found PIIX4M\n");
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found unknown PIIX4\n"));
+ dev_dbg(&dev->dev, "Found unknown PIIX4\n");
break;
}

@@ -129,11 +125,9 @@ static int acpi_processor_errata_piix4(s
}

if (errata.piix4.bmisx)
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Bus master activity detection (BM-IDE) erratum enabled\n"));
+ dev_dbg(&dev->dev, "Bus master activity detection (BM-IDE) erratum enabled\n");
if (errata.piix4.fdma)
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Type-F DMA livelock erratum (C3 disabled)\n"));
+ dev_dbg(&dev->dev, "Type-F DMA livelock erratum (C3 disabled)\n");

return 0;
}
@@ -244,11 +238,9 @@ static int acpi_processor_get_info(struc
*/
if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) {
pr->flags.bm_control = 1;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Bus mastering arbitration control present\n"));
+ dev_dbg(&device->dev, "Bus mastering arbitration control present\n");
} else
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "No bus mastering arbitration control\n"));
+ dev_dbg(&device->dev, "No bus mastering arbitration control\n");

if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) {
/* Declared with "Processor" statement; match ProcessorID */
@@ -291,7 +283,7 @@ static int acpi_processor_get_info(struc
pr->phys_id = acpi_get_phys_id(pr->handle, device_declaration,
pr->acpi_id);
if (invalid_phys_cpuid(pr->phys_id))
- acpi_handle_debug(pr->handle, "failed to get CPU physical ID.\n");
+ dev_dbg(&device->dev, "Failed to get CPU physical ID.\n");

pr->id = acpi_map_cpuid(pr->phys_id, pr->acpi_id);
if (!cpu0_initialized && !acpi_has_cpu_in_madt()) {
@@ -328,11 +320,10 @@ static int acpi_processor_get_info(struc
* CPU+CPU ID.
*/
sprintf(acpi_device_bid(device), "CPU%X", pr->id);
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Processor [%d:%d]\n", pr->id,
- pr->acpi_id));
+ dev_dbg(&device->dev, "Processor [%d:%d]\n", pr->id, pr->acpi_id);

if (!object.processor.pblk_address)
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No PBLK (NULL address)\n"));
+ dev_dbg(&device->dev, "No PBLK (NULL address)\n");
else if (object.processor.pblk_length != 6)
dev_err(&device->dev, "Invalid PBLK length [%d]\n",
object.processor.pblk_length);
Index: linux-pm/drivers/acpi/processor_driver.c
===================================================================
--- linux-pm.orig/drivers/acpi/processor_driver.c
+++ linux-pm/drivers/acpi/processor_driver.c
@@ -28,9 +28,6 @@
#define ACPI_PROCESSOR_NOTIFY_POWER 0x81
#define ACPI_PROCESSOR_NOTIFY_THROTTLING 0x82

-#define _COMPONENT ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("processor_driver");
-
MODULE_AUTHOR("Paul Diefenbaugh");
MODULE_DESCRIPTION("ACPI Processor Driver");
MODULE_LICENSE("GPL");
@@ -87,8 +84,7 @@ static void acpi_processor_notify(acpi_h
dev_name(&device->dev), event, 0);
break;
default:
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Unsupported event [0x%x]\n", event));
+ acpi_handle_debug(handle, "Unsupported event [0x%x]\n", event);
break;
}

Index: linux-pm/drivers/acpi/processor_idle.c
===================================================================
--- linux-pm.orig/drivers/acpi/processor_idle.c
+++ linux-pm/drivers/acpi/processor_idle.c
@@ -31,9 +31,6 @@
#include <asm/apic.h>
#endif

-#define _COMPONENT ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("processor_idle");
-
#define ACPI_IDLE_STATE_START (IS_ENABLED(CONFIG_ARCH_HAS_CPU_RELAX) ? 1 : 0)

static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER;
@@ -239,8 +236,8 @@ static int acpi_processor_get_power_info
* 100 microseconds.
*/
if (acpi_gbl_FADT.c2_latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C2 latency too large [%d]\n", acpi_gbl_FADT.c2_latency));
+ acpi_handle_debug(pr->handle, "C2 latency too large [%d]\n",
+ acpi_gbl_FADT.c2_latency);
/* invalidate C2 */
pr->power.states[ACPI_STATE_C2].address = 0;
}
@@ -250,16 +247,15 @@ static int acpi_processor_get_power_info
* 1000 microseconds.
*/
if (acpi_gbl_FADT.c3_latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C3 latency too large [%d]\n", acpi_gbl_FADT.c3_latency));
+ acpi_handle_debug(pr->handle, "C3 latency too large [%d]\n",
+ acpi_gbl_FADT.c3_latency);
/* invalidate C3 */
pr->power.states[ACPI_STATE_C3].address = 0;
}

- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "lvl2[0x%08x] lvl3[0x%08x]\n",
+ acpi_handle_debug(pr->handle, "lvl2[0x%08x] lvl3[0x%08x]\n",
pr->power.states[ACPI_STATE_C2].address,
- pr->power.states[ACPI_STATE_C3].address));
+ pr->power.states[ACPI_STATE_C3].address);

snprintf(pr->power.states[ACPI_STATE_C2].desc,
ACPI_CX_DESC_LEN, "ACPI P_LVL2 IOPORT 0x%x",
@@ -324,8 +320,8 @@ static void acpi_processor_power_verify_
* devices thus we take the conservative approach.
*/
else if (errata.piix4.fdma) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C3 not supported on PIIX4 with Type-F DMA\n"));
+ acpi_handle_debug(pr->handle,
+ "C3 not supported on PIIX4 with Type-F DMA\n");
return;
}

@@ -344,13 +340,13 @@ static void acpi_processor_power_verify_
if (!pr->flags.bm_control) {
if (pr->flags.has_cst != 1) {
/* bus mastering control is necessary */
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C3 support requires BM control\n"));
+ acpi_handle_debug(pr->handle,
+ "C3 support requires BM control\n");
return;
} else {
/* Here we enter C3 without bus mastering */
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C3 support without BM control\n"));
+ acpi_handle_debug(pr->handle,
+ "C3 support without BM control\n");
}
}
} else {
@@ -359,9 +355,9 @@ static void acpi_processor_power_verify_
* supported on when bm_check is not required.
*/
if (!(acpi_gbl_FADT.flags & ACPI_FADT_WBINVD)) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ acpi_handle_debug(pr->handle,
"Cache invalidation should work properly"
- " for C3 to be enabled on SMP systems\n"));
+ " for C3 to be enabled on SMP systems\n");
return;
}
}
@@ -843,7 +839,7 @@ static int acpi_processor_evaluate_lpi(a

status = acpi_evaluate_object(handle, "_LPI", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No _LPI, giving up\n"));
+ acpi_handle_debug(handle, "No _LPI, giving up\n");
return -ENODEV;
}

Index: linux-pm/drivers/acpi/processor_pdc.c
===================================================================
--- linux-pm.orig/drivers/acpi/processor_pdc.c
+++ linux-pm/drivers/acpi/processor_pdc.c
@@ -16,9 +16,6 @@

#include "internal.h"

-#define _COMPONENT ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("processor_pdc");
-
static bool __init processor_physically_present(acpi_handle handle)
{
int cpuid, type;
@@ -132,8 +129,8 @@ acpi_processor_eval_pdc(acpi_handle hand
status = acpi_evaluate_object(handle, "_PDC", pdc_in, NULL);

if (ACPI_FAILURE(status))
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Could not evaluate _PDC, using legacy perf. control.\n"));
+ acpi_handle_debug(handle,
+ "Could not evaluate _PDC, using legacy perf control\n");

return status;
}
Index: linux-pm/drivers/acpi/processor_perflib.c
===================================================================
--- linux-pm.orig/drivers/acpi/processor_perflib.c
+++ linux-pm/drivers/acpi/processor_perflib.c
@@ -23,8 +23,6 @@
#define PREFIX "ACPI: "

#define ACPI_PROCESSOR_FILE_PERFORMANCE "performance"
-#define _COMPONENT ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("processor_perflib");

static DEFINE_MUTEX(performance_mutex);

@@ -70,7 +68,8 @@ static int acpi_processor_get_platform_l
acpi_processor_ppc_in_use = true;

if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PPC"));
+ acpi_handle_warn(pr->handle, "_PPC evaluation failed: %s\n",
+ acpi_format_exception(status));
return -ENODEV;
}

@@ -199,7 +198,8 @@ static int acpi_processor_get_performanc

status = acpi_evaluate_object(pr->handle, "_PCT", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PCT"));
+ acpi_handle_warn(pr->handle, "_PCT evaluation failed: %s\n",
+ acpi_format_exception(status));
return -ENODEV;
}

@@ -299,7 +299,8 @@ static int acpi_processor_get_performanc

status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PSS"));
+ acpi_handle_warn(pr->handle, "_PSS evaluation failed: %s\n",
+ acpi_format_exception(status));
return -ENODEV;
}

@@ -310,8 +311,8 @@ static int acpi_processor_get_performanc
goto end;
}

- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d performance states\n",
- pss->package.count));
+ acpi_handle_debug(pr->handle, "Found %d performance states\n",
+ pss->package.count);

pr->performance->state_count = pss->package.count;
pr->performance->states =
@@ -330,12 +331,13 @@ static int acpi_processor_get_performanc
state.length = sizeof(struct acpi_processor_px);
state.pointer = px;

- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Extracting state %d\n", i));
+ acpi_handle_debug(pr->handle, "Extracting state %d\n", i);

status = acpi_extract_package(&(pss->package.elements[i]),
&format, &state);
if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Invalid _PSS data"));
+ acpi_handle_warn(pr->handle, "Invalid _PSS data: %s\n",
+ acpi_format_exception(status));
result = -EFAULT;
kfree(pr->performance->states);
goto end;
@@ -343,14 +345,14 @@ static int acpi_processor_get_performanc

amd_fixup_frequency(px, i);

- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ acpi_handle_debug(pr->handle,
"State [%d]: core_frequency[%d] power[%d] transition_latency[%d] bus_master_latency[%d] control[0x%x] status[0x%x]\n",
i,
(u32) px->core_frequency,
(u32) px->power,
(u32) px->transition_latency,
(u32) px->bus_master_latency,
- (u32) px->control, (u32) px->status));
+ (u32) px->control, (u32) px->status);

/*
* Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
@@ -400,8 +402,8 @@ int acpi_processor_get_performance_info(
return -EINVAL;

if (!acpi_has_method(pr->handle, "_PCT")) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "ACPI-based processor performance control unavailable\n"));
+ acpi_handle_debug(pr->handle,
+ "ACPI-based processor performance control unavailable\n");
return -ENODEV;
}

@@ -442,18 +444,17 @@ int acpi_processor_pstate_control(void)
if (!acpi_gbl_FADT.smi_command || !acpi_gbl_FADT.pstate_control)
return 0;

- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Writing pstate_control [0x%x] to smi_command [0x%x]\n",
- acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command));
+ pr_debug("Writing pstate_control [0x%x] to smi_command [0x%x]\n",
+ acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command);

status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
(u32)acpi_gbl_FADT.pstate_control, 8);
if (ACPI_SUCCESS(status))
return 1;

- ACPI_EXCEPTION((AE_INFO, status,
- "Failed to write pstate_control [0x%x] to smi_command [0x%x]",
- acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command));
+ pr_warn("Failed to write pstate_control [0x%x] to smi_command [0x%x]: %s\n",
+ acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command,
+ acpi_format_exception(status));
return -EIO;
}

@@ -485,7 +486,7 @@ int acpi_processor_notify_smm(struct mod

result = acpi_processor_pstate_control();
if (!result) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No SMI port or pstate_control\n"));
+ pr_debug("No SMI port or pstate_control\n");
module_put(calling_module);
return 0;
}
Index: linux-pm/drivers/acpi/processor_throttling.c
===================================================================
--- linux-pm.orig/drivers/acpi/processor_throttling.c
+++ linux-pm/drivers/acpi/processor_throttling.c
@@ -22,9 +22,6 @@

#define PREFIX "ACPI: "

-#define _COMPONENT ACPI_PROCESSOR_COMPONENT
-ACPI_MODULE_NAME("processor_throttling");
-
/* ignore_tpc:
* 0 -> acpi processor driver doesn't ignore _TPC values
* 1 -> acpi processor driver ignores _TPC values
@@ -196,10 +193,8 @@ err_ret:
*/
void acpi_processor_throttling_init(void)
{
- if (acpi_processor_update_tsd_coord()) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Assume no T-state coordination\n"));
- }
+ if (acpi_processor_update_tsd_coord())
+ pr_debug("Assume no T-state coordination\n");

return;
}
@@ -216,12 +211,13 @@ static int acpi_processor_throttling_not
cpu = p_tstate->cpu;
pr = per_cpu(processors, cpu);
if (!pr) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Invalid pr pointer\n"));
+ pr_debug("Invalid pr pointer\n");
return 0;
}
if (!pr->flags.throttling) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Throttling control is "
- "unsupported on CPU %d\n", cpu));
+ acpi_handle_debug(pr->handle,
+ "Throttling control unsupported on CPU %d\n",
+ cpu);
return 0;
}
target_state = p_tstate->target_state;
@@ -245,9 +241,9 @@ static int acpi_processor_throttling_not
target_state = p_throttling->state_count - 1;
}
p_tstate->target_state = target_state;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "PreChange Event:"
- "target T-state of CPU %d is T%d\n",
- cpu, target_state));
+ acpi_handle_debug(pr->handle,
+ "PreChange Event: target T-state of CPU %d is T%d\n",
+ cpu, target_state);
break;
case THROTTLING_POSTCHANGE:
/*
@@ -255,9 +251,9 @@ static int acpi_processor_throttling_not
* T-state flag of acpi_processor_throttling.
*/
p_throttling->state = target_state;
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "PostChange Event:"
- "CPU %d is switched to T%d\n",
- cpu, target_state));
+ acpi_handle_debug(pr->handle,
+ "PostChange Event: CPU %d is switched to T%d\n",
+ cpu, target_state);
break;
default:
printk(KERN_WARNING
@@ -284,9 +280,11 @@ static int acpi_processor_get_platform_l

status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc);
if (ACPI_FAILURE(status)) {
- if (status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TPC"));
- }
+ if (status != AE_NOT_FOUND)
+ acpi_handle_warn(pr->handle,
+ "_TPC evaluation failed: %s\n",
+ acpi_format_exception(status));
+
return -ENODEV;
}

@@ -417,9 +415,11 @@ static int acpi_processor_get_throttling

status = acpi_evaluate_object(pr->handle, "_PTC", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- if (status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PTC"));
- }
+ if (status != AE_NOT_FOUND)
+ acpi_handle_warn(pr->handle,
+ "_PTC evaluation failed: %s\n",
+ acpi_format_exception(status));
+
return -ENODEV;
}

@@ -502,9 +502,11 @@ static int acpi_processor_get_throttling

status = acpi_evaluate_object(pr->handle, "_TSS", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- if (status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSS"));
- }
+ if (status != AE_NOT_FOUND)
+ acpi_handle_warn(pr->handle,
+ "_TSS evaluation failed: %s\n",
+ acpi_format_exception(status));
+
return -ENODEV;
}

@@ -515,8 +517,8 @@ static int acpi_processor_get_throttling
goto end;
}

- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d throttling states\n",
- tss->package.count));
+ acpi_handle_debug(pr->handle, "Found %d throttling states\n",
+ tss->package.count);

pr->throttling.state_count = tss->package.count;
pr->throttling.states_tss =
@@ -537,12 +539,13 @@ static int acpi_processor_get_throttling
state.length = sizeof(struct acpi_processor_tx_tss);
state.pointer = tx;

- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Extracting state %d\n", i));
+ acpi_handle_debug(pr->handle, "Extracting state %d\n", i);

status = acpi_extract_package(&(tss->package.elements[i]),
&format, &state);
if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Invalid _TSS data"));
+ acpi_handle_warn(pr->handle, "Invalid _TSS data: %s\n",
+ acpi_format_exception(status));
result = -EFAULT;
kfree(pr->throttling.states_tss);
goto end;
@@ -582,9 +585,11 @@ static int acpi_processor_get_tsd(struct

status = acpi_evaluate_object(pr->handle, "_TSD", NULL, &buffer);
if (ACPI_FAILURE(status)) {
- if (status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSD"));
- }
+ if (status != AE_NOT_FOUND)
+ acpi_handle_warn(pr->handle,
+ "_TSD evaluation failed: %s\n",
+ acpi_format_exception(status));
+
return -ENODEV;
}

@@ -698,9 +703,9 @@ static int acpi_processor_get_throttling

local_irq_enable();

- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ acpi_handle_debug(pr->handle,
"Throttling state is T%d (%d%% throttling applied)\n",
- state, pr->throttling.states[state].performance));
+ state, pr->throttling.states[state].performance);

return 0;
}
@@ -875,8 +880,8 @@ static int acpi_processor_get_throttling
if (ret >= 0) {
state = acpi_get_throttling_state(pr, value);
if (state == -1) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Invalid throttling state, reset\n"));
+ acpi_handle_debug(pr->handle,
+ "Invalid throttling state, reset\n");
state = 0;
ret = __acpi_processor_set_throttling(pr, state, true,
true);
@@ -921,10 +926,10 @@ static int acpi_processor_get_fadt_info(
int i, step;

if (!pr->throttling.address) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n"));
+ acpi_handle_debug(pr->handle, "No throttling register\n");
return -EINVAL;
} else if (!pr->throttling.duty_width) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling states\n"));
+ acpi_handle_debug(pr->handle, "No throttling states\n");
return -EINVAL;
}
/* TBD: Support duty_cycle values that span bit 4. */
@@ -1015,10 +1020,10 @@ static int acpi_processor_set_throttling

local_irq_enable();

- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ acpi_handle_debug(pr->handle,
"Throttling state set to T%d (%d%%)\n", state,
(pr->throttling.states[state].performance ? pr->
- throttling.states[state].performance / 10 : 0)));
+ throttling.states[state].performance / 10 : 0));

return 0;
}
@@ -1129,8 +1134,8 @@ static int __acpi_processor_set_throttli
* error message and continue.
*/
if (!match_pr) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Invalid Pointer for CPU %d\n", i));
+ acpi_handle_debug(pr->handle,
+ "Invalid Pointer for CPU %d\n", i);
continue;
}
/*
@@ -1138,9 +1143,8 @@ static int __acpi_processor_set_throttli
* we will report the error message and continue.
*/
if (!match_pr->flags.throttling) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Throttling Control is unsupported "
- "on CPU %d\n", i));
+ acpi_handle_debug(pr->handle,
+ "Throttling Control unsupported on CPU %d\n", i);
continue;
}

@@ -1177,11 +1181,11 @@ int acpi_processor_get_throttling_info(s
int result = 0;
struct acpi_processor_throttling *pthrottling;

- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ acpi_handle_debug(pr->handle,
"pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n",
pr->throttling.address,
pr->throttling.duty_offset,
- pr->throttling.duty_width));
+ pr->throttling.duty_width);

/*
* Evaluate _PTC, _TSS and _TPC
@@ -1221,13 +1225,13 @@ int acpi_processor_get_throttling_info(s
* used this part.
*/
if (errata.piix4.throttle) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Throttling not supported on PIIX4 A- or B-step\n"));
+ acpi_handle_debug(pr->handle,
+ "Throttling not supported on PIIX4 A- or B-step\n");
return 0;
}

- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found %d throttling states\n",
- pr->throttling.state_count));
+ acpi_handle_debug(pr->handle, "Found %d throttling states\n",
+ pr->throttling.state_count);

pr->flags.throttling = 1;

@@ -1242,9 +1246,9 @@ int acpi_processor_get_throttling_info(s
goto end;

if (pr->throttling.state) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ acpi_handle_debug(pr->handle,
"Disabling throttling (was T%d)\n",
- pr->throttling.state));
+ pr->throttling.state);
result = acpi_processor_set_throttling(pr, 0, false);
if (result)
goto end;
Index: linux-pm/Documentation/firmware-guide/acpi/debug.rst
===================================================================
--- linux-pm.orig/Documentation/firmware-guide/acpi/debug.rst
+++ linux-pm/Documentation/firmware-guide/acpi/debug.rst
@@ -57,7 +57,6 @@ shows the supported mask values, current
ACPI_CONTAINER_COMPONENT 0x01000000
ACPI_SYSTEM_COMPONENT 0x02000000
ACPI_MEMORY_DEVICE_COMPONENT 0x08000000
- ACPI_PROCESSOR_COMPONENT 0x20000000

debug_level
===========
Index: linux-pm/drivers/acpi/sysfs.c
===================================================================
--- linux-pm.orig/drivers/acpi/sysfs.c
+++ linux-pm/drivers/acpi/sysfs.c
@@ -57,7 +57,6 @@ static const struct acpi_dlayer acpi_deb
ACPI_DEBUG_INIT(ACPI_CONTAINER_COMPONENT),
ACPI_DEBUG_INIT(ACPI_SYSTEM_COMPONENT),
ACPI_DEBUG_INIT(ACPI_MEMORY_DEVICE_COMPONENT),
- ACPI_DEBUG_INIT(ACPI_PROCESSOR_COMPONENT),
};

static const struct acpi_dlevel acpi_debug_levels[] = {
Index: linux-pm/include/acpi/acpi_drivers.h
===================================================================
--- linux-pm.orig/include/acpi/acpi_drivers.h
+++ linux-pm/include/acpi/acpi_drivers.h
@@ -20,7 +20,6 @@
#define ACPI_CONTAINER_COMPONENT 0x01000000
#define ACPI_SYSTEM_COMPONENT 0x02000000
#define ACPI_MEMORY_DEVICE_COMPONENT 0x08000000
-#define ACPI_PROCESSOR_COMPONENT 0x20000000

/*
* _HID definitions