AW: [PATCH] net: hsr: add support for EntryForgetTime

From: Wenzel, Marco
Date: Fri Feb 19 2021 - 03:29:27 EST


On Thu, Feb 18, 2021 at 6:06 PM : George McCollister <george.mccollister@xxxxxxxxx> wrote:
>
> On Thu, Feb 18, 2021 at 9:01 AM Marco Wenzel <marco.wenzel@a-
> eberle.de> wrote:
> >
> > In IEC 62439-3 EntryForgetTime is defined with a value of 400 ms. When
> > a node does not send any frame within this time, the sequence number
> > check for can be ignored. This solves communication issues with Cisco
> > IE 2000 in Redbox mode.
> >
> > Fixes: f421436a591d ("net/hsr: Add support for the High-availability
> > Seamless Redundancy protocol (HSRv0)")
> > Signed-off-by: Marco Wenzel <marco.wenzel@xxxxxxxxxxx>
> > ---
> > net/hsr/hsr_framereg.c | 9 +++++++--
> > net/hsr/hsr_framereg.h | 1 +
> > net/hsr/hsr_main.h | 1 +
> > 3 files changed, 9 insertions(+), 2 deletions(-)
> >
> > diff --git a/net/hsr/hsr_framereg.c b/net/hsr/hsr_framereg.c index
> > 5c97de459905..805f974923b9 100644
> > --- a/net/hsr/hsr_framereg.c
> > +++ b/net/hsr/hsr_framereg.c
> > @@ -164,8 +164,10 @@ static struct hsr_node *hsr_add_node(struct
> hsr_priv *hsr,
> > * as initialization. (0 could trigger an spurious ring error warning).
> > */
> > now = jiffies;
> > - for (i = 0; i < HSR_PT_PORTS; i++)
> > + for (i = 0; i < HSR_PT_PORTS; i++) {
> > new_node->time_in[i] = now;
> > + new_node->time_out[i] = now;
> > + }
> > for (i = 0; i < HSR_PT_PORTS; i++)
> > new_node->seq_out[i] = seq_out;
> >
> > @@ -411,9 +413,12 @@ void hsr_register_frame_in(struct hsr_node
> *node,
> > struct hsr_port *port, int hsr_register_frame_out(struct hsr_port *port,
> struct hsr_node *node,
> > u16 sequence_nr) {
> > - if (seq_nr_before_or_eq(sequence_nr, node->seq_out[port->type]))
> > + if (seq_nr_before_or_eq(sequence_nr, node->seq_out[port->type])
> &&
> > + time_is_after_jiffies(node->time_out[port->type] +
> > + msecs_to_jiffies(HSR_ENTRY_FORGET_TIME)))
> > return 1;
> >
> > + node->time_out[port->type] = jiffies;
> > node->seq_out[port->type] = sequence_nr;
> > return 0;
> > }
> > diff --git a/net/hsr/hsr_framereg.h b/net/hsr/hsr_framereg.h index
> > 86b43f539f2c..d9628e7a5f05 100644
> > --- a/net/hsr/hsr_framereg.h
> > +++ b/net/hsr/hsr_framereg.h
> > @@ -75,6 +75,7 @@ struct hsr_node {
> > enum hsr_port_type addr_B_port;
> > unsigned long time_in[HSR_PT_PORTS];
> > bool time_in_stale[HSR_PT_PORTS];
> > + unsigned long time_out[HSR_PT_PORTS];
> > /* if the node is a SAN */
> > bool san_a;
> > bool san_b;
> > diff --git a/net/hsr/hsr_main.h b/net/hsr/hsr_main.h index
> > 7dc92ce5a134..f79ca55d6986 100644
> > --- a/net/hsr/hsr_main.h
> > +++ b/net/hsr/hsr_main.h
> > @@ -21,6 +21,7 @@
> > #define HSR_LIFE_CHECK_INTERVAL 2000 /* ms */
> > #define HSR_NODE_FORGET_TIME 60000 /* ms */
> > #define HSR_ANNOUNCE_INTERVAL 100 /* ms */
> > +#define HSR_ENTRY_FORGET_TIME 400 /* ms */
> >
> > /* By how much may slave1 and slave2 timestamps of latest received
> frame from
> > * each node differ before we notify of communication problem?
> > --
> > 2.30.0
> >
>
> scripts/checkpatch.pl gives errors about DOS line endings but once that is
> resolved this looks good. I tested it on an HSR network with the software
> implementation and the xrs700x which uses offloading and everything still
> works. I don't have a way to force anything on the HSR network to reuse
> sequence numbers after 400ms.
>
> Reviewed-by: George McCollister <george.mccollister@xxxxxxxxx
> Tested-by: George McCollister <george.mccollister@xxxxxxxxx

Thank you very much for reviewing, testing and supporting!

Where do you see the incorrect line endings? I just ran scripts/checkpath.pl as git commit hook and it did not report any errors. When I run it again manually, it also does not report any errors:

# ./scripts/checkpatch.pl --strict /tmp/0001-net-hsr-add-support-for-EntryForgetTime.patch
total: 0 errors, 0 warnings, 0 checks, 38 lines checked

/tmp/0001-net-hsr-add-support-for-EntryForgetTime.patch has no obvious style problems and is ready for submission.


Regards,
Marco Wenzel