[PATCH v15 1/4] dt-bindings: phy: Add sparx5-serdes bindings

From: Steen Hegelund
Date: Thu Feb 18 2021 - 13:40:10 EST


Document the Sparx5 ethernet serdes phy driver bindings.

Signed-off-by: Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx>
Signed-off-by: Steen Hegelund <steen.hegelund@xxxxxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Reviewed-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
---
.../bindings/phy/microchip,sparx5-serdes.yaml | 100 ++++++++++++++++++
1 file changed, 100 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml

diff --git a/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml b/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml
new file mode 100644
index 000000000000..bdbdb3bbddbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/microchip,sparx5-serdes.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Sparx5 Serdes controller
+
+maintainers:
+ - Steen Hegelund <steen.hegelund@xxxxxxxxxxxxx>
+
+description: |
+ The Sparx5 SERDES interfaces share the same basic functionality, but
+ support different operating modes and line rates.
+
+ The following list lists the SERDES features:
+
+ * RX Adaptive Decision Feedback Equalizer (DFE)
+ * Programmable continuous time linear equalizer (CTLE)
+ * Rx variable gain control
+ * Rx built-in fault detector (loss-of-lock/loss-of-signal)
+ * Adjustable tx de-emphasis (FFE)
+ * Tx output amplitude control
+ * Supports rx eye monitor
+ * Multiple loopback modes
+ * Prbs generator and checker
+ * Polarity inversion control
+
+ SERDES6G:
+
+ The SERDES6G is a high-speed SERDES interface, which can operate at
+ the following data rates:
+
+ * 100 Mbps (100BASE-FX)
+ * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
+ * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
+ * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
+
+ SERDES10G
+
+ The SERDES10G is a high-speed SERDES interface, which can operate at
+ the following data rates:
+
+ * 100 Mbps (100BASE-FX)
+ * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
+ * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
+ * 5 Gbps (QSGMII/USGMII)
+ * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
+ * 10 Gbps (10G-USGMII)
+ * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII)
+
+ SERDES25G
+
+ The SERDES25G is a high-speed SERDES interface, which can operate at
+ the following data rates:
+
+ * 1.25 Gbps (SGMII/1000BASE-X/1000BASE-KX)
+ * 3.125 Gbps (2.5GBASE-X/2.5GBASE-KX)
+ * 5 Gbps (QSGMII/USGMII)
+ * 5.15625 Gbps (5GBASE-KR/5G-USXGMII)
+ * 10 Gbps (10G-USGMII)
+ * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII)
+ * 25.78125 Gbps (25GBASE-KR/25GBASE-CR/25GBASE-SR/25GBASE-LR/25GBASE-ER)
+
+properties:
+ $nodename:
+ pattern: "^serdes@[0-9a-f]+$"
+
+ compatible:
+ const: microchip,sparx5-serdes
+
+ reg:
+ minItems: 1
+
+ '#phy-cells':
+ const: 1
+ description: |
+ - The main serdes input port
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - '#phy-cells'
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ serdes: serdes@10808000 {
+ compatible = "microchip,sparx5-serdes";
+ #phy-cells = <1>;
+ clocks = <&sys_clk>;
+ reg = <0x10808000 0x5d0000>;
+ };
+
+...
--
2.30.0