Re: [PATCH v3 2/2] arm64: dts: qcom: sm8250: fix display nodes

From: Dmitry Baryshkov
Date: Tue Feb 16 2021 - 16:15:19 EST


Except for the compatible value changes:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>

May I suggest to split the compatibility name changes into a separate
series from this patch (without it the patch stands a chance of being
accepted into the stable tree, if I'm not mistaken).

On Mon, 15 Feb 2021 at 19:27, Jonathan Marek <jonathan@xxxxxxxx> wrote:
>
> Apply these fixes to the newly added sm8250 display ndoes
> - Use sm8250 compatibles instead of sdm845 compatibles
> - Remove "notused" interconnect (which apparently was blindly copied from
> my old patches)
> - Use dispcc node example from dt-bindings, removing clocks which aren't
> documented or used by the driver and fixing the region size.
>
> Fixes: 7c1dffd471b1 ("arm64: dts: qcom: sm8250.dtsi: add display system nodes")
> Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 31 +++++++---------------------
> 1 file changed, 8 insertions(+), 23 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index 947e1accae3a..693ac533f9b6 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -2323,14 +2323,13 @@ usb_2_dwc3: dwc3@a800000 {
> };
>
> mdss: mdss@ae00000 {
> - compatible = "qcom,sdm845-mdss";
> + compatible = "qcom,sm8250-mdss";
> reg = <0 0x0ae00000 0 0x1000>;
> reg-names = "mdss";
>
> - interconnects = <&gem_noc MASTER_AMPSS_M0 &config_noc SLAVE_DISPLAY_CFG>,
> - <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
> + interconnects = <&mmss_noc MASTER_MDP_PORT0 &mc_virt SLAVE_EBI_CH0>,
> <&mmss_noc MASTER_MDP_PORT1 &mc_virt SLAVE_EBI_CH0>;
> - interconnect-names = "notused", "mdp0-mem", "mdp1-mem";
> + interconnect-names = "mdp0-mem", "mdp1-mem";
>
> power-domains = <&dispcc MDSS_GDSC>;
>
> @@ -2356,7 +2355,7 @@ mdss: mdss@ae00000 {
> ranges;
>
> mdss_mdp: mdp@ae01000 {
> - compatible = "qcom,sdm845-dpu";
> + compatible = "qcom,sm8250-dpu";
> reg = <0 0x0ae01000 0 0x8f000>,
> <0 0x0aeb0000 0 0x2008>;
> reg-names = "mdp", "vbif";
> @@ -2580,7 +2579,7 @@ opp-358000000 {
>
> dispcc: clock-controller@af00000 {
> compatible = "qcom,sm8250-dispcc";
> - reg = <0 0x0af00000 0 0x20000>;
> + reg = <0 0x0af00000 0 0x10000>;
> mmcx-supply = <&mmcx_reg>;
> clocks = <&rpmhcc RPMH_CXO_CLK>,
> <&dsi0_phy 0>,
> @@ -2588,28 +2587,14 @@ dispcc: clock-controller@af00000 {
> <&dsi1_phy 0>,
> <&dsi1_phy 1>,
> <0>,
> - <0>,
> - <0>,
> - <0>,
> - <0>,
> - <0>,
> - <0>,
> - <0>,
> - <&sleep_clk>;
> + <0>;
> clock-names = "bi_tcxo",
> "dsi0_phy_pll_out_byteclk",
> "dsi0_phy_pll_out_dsiclk",
> "dsi1_phy_pll_out_byteclk",
> "dsi1_phy_pll_out_dsiclk",
> - "dp_link_clk_divsel_ten",
> - "dp_vco_divided_clk_src_mux",
> - "dptx1_phy_pll_link_clk",
> - "dptx1_phy_pll_vco_div_clk",
> - "dptx2_phy_pll_link_clk",
> - "dptx2_phy_pll_vco_div_clk",
> - "edp_phy_pll_link_clk",
> - "edp_phy_pll_vco_div_clk",
> - "sleep_clk";
> + "dp_phy_pll_link_clk",
> + "dp_phy_pll_vco_div_clk";
> #clock-cells = <1>;
> #reset-cells = <1>;
> #power-domain-cells = <1>;
> --
> 2.26.1
>


--
With best wishes
Dmitry