Re: [PATCH v2 1/4] dt-bindings: leds: Add binding for qcom-spmi-flash

[Jacek Anaszewski]

Hi Nicolas,

On 1/26/21 3:04 PM, Nícolas F. R. A. Prado wrote:
> Add devicetree binding for QCOM SPMI Flash LEDs, which are part of
> PM8941, and are used both as lantern and camera flash.
>
> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxxx>
> ---
> Changes in v2:
> - Add this commit
>
>   .../bindings/leds/leds-qcom-spmi-flash.yaml   | 94 +++++++++++++++++++
>   .../dt-bindings/leds/leds-qcom-spmi-flash.h   | 15 +++
>   2 files changed, 109 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/leds/leds-qcom-spmi-flash.yaml
>   create mode 100644 include/dt-bindings/leds/leds-qcom-spmi-flash.h
>
> diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-spmi-flash.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-spmi-flash.yaml
> new file mode 100644
> index 000000000000..169716e14f67
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/leds-qcom-spmi-flash.yaml
> @@ -0,0 +1,94 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/leds-qcom-spmi-flash.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm SPMI Flash LEDs
> +
> +maintainers:
> +  - Nícolas F. R. A. Prado <nfraprado@xxxxxxxxxxxxxx>
> +
> +description: |
> +  The Qualcomm SPMI Flash LEDs are part of Qualcomm PMICs and are used primarily
> +  as a camera or video flash. They can also be used as a lantern when on torch
> +  mode.
> +  The PMIC is connected to Host processor via SPMI bus.
> +
> +properties:
> +  compatible:
> +    const: qcom,spmi-flash
> +
> +  reg:
> +    maxItems: 1
> +
> +  flash-boost-supply:
> +    description: SMBB regulator for LED flash mode
> +
> +  torch-boost-supply:
> +    description: SMBB regulator for LED torch mode
> +
> +patternProperties:
> +  "^led[0-1]$":
> +    type: object
> +    $ref: common.yaml#
> +
> +    properties:
> +      qcom,clamp-curr:
> +        description: current to clamp at, in uA

You're already using led-max-microamp and flash-max-microamp,
so I'm not sure how this is related to those.

> +        $ref: /schemas/types.yaml#definitions/uint32
> +
> +      qcom,headroom:
> +        description: |
> +          headroom to use. Use one of QCOM_SPMI_FLASH_HEADROOM_* defined in
> +          include/dt-bindings/leds/leds-qcom-spmi-flash.h

More information would be welcome here on how it impacts device
operation.

> +        $ref: /schemas/types.yaml#definitions/uint32
> +        minimum: 0
> +        maximum: 3
> +
> +      qcom,startup-dly:
> +        description: |
> +          delay before flashing. Use one of QCOM_SPMI_FLASH_STARTUP_DLY_*
> +          defined in include/dt-bindings/leds/leds-qcom-spmi-flash.h

I don't see much gain in having this exposed.
We don't have related constructs in the API to handle that, so I propose
to always set it to 0 and not expose this setting at all.

> +        $ref: /schemas/types.yaml#definitions/uint32
> +        minimum: 0
> +        maximum: 3
> +
> +      qcom,safety-timer:
> +        description: include for safety timer use, otherwise watchdog timer will be used
> +        type: boolean

What's the difference between watchdog timer and safety timer?
Either way, I propose to choose the option best fitting for handling
flash timeout setting and hide this inside the driver.

> +required:
> +  - compatible
> +  - reg
> +  - flash-boost-supply
> +  - torch-boost-supply
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/leds/common.h>
> +    #include <dt-bindings/leds/leds-qcom-spmi-flash.h>
> +
> +    qcom,leds@d300 {
> +        compatible = "qcom,spmi-flash";
> +        reg = <0xd300 0x100>;
> +        flash-boost-supply = <&pm8941_5vs1>;
> +        torch-boost-supply = <&pm8941_5v>;
> +
> +        led0 {
> +            led-sources = <0>;

Please use reg property for this purpose instead.

> +            function = LED_FUNCTION_FLASH;
> +            color = <LED_COLOR_ID_WHITE>;
> +            led-max-microamp = <200000>;
> +            flash-max-microamp = <1000000>;
> +            flash-max-timeout-us = <1280000>;

You should mention this properties above and provide constraints
(min, max, step).

> +            default-state = "off";

There's no point in having this in the example.

> +            qcom,clamp-curr = <200000>; > +            qcom,headroom = <QCOM_SPMI_FLASH_HEADROOM_500MV>;
> +            qcom,startup-dly = <QCOM_SPMI_FLASH_STARTUP_DLY_128US>;
> +            qcom,safety-timer;
> +        };
> +    };
> +...
> diff --git a/include/dt-bindings/leds/leds-qcom-spmi-flash.h b/include/dt-bindings/leds/leds-qcom-spmi-flash.h
> new file mode 100644
> index 000000000000..8bd54a8e831d
> --- /dev/null
> +++ b/include/dt-bindings/leds/leds-qcom-spmi-flash.h
> @@ -0,0 +1,15 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef _DT_BINDINGS_LEDS_QCOM_SPMI_FLASH_H
> +#define _DT_BINDINGS_LEDS_QCOM_SPMI_FLASH_H
> +
> +#define QCOM_SPMI_FLASH_HEADROOM_250MV	0
> +#define QCOM_SPMI_FLASH_HEADROOM_300MV	1
> +#define QCOM_SPMI_FLASH_HEADROOM_400MV	2
> +#define QCOM_SPMI_FLASH_HEADROOM_500MV	3
> +
> +#define QCOM_SPMI_FLASH_STARTUP_DLY_10US	0
> +#define QCOM_SPMI_FLASH_STARTUP_DLY_32US	1
> +#define QCOM_SPMI_FLASH_STARTUP_DLY_64US	2
> +#define QCOM_SPMI_FLASH_STARTUP_DLY_128US	3
> +
> +#endif

--
Best regards,
Jacek Anaszewski