[PATCH] mtd: rawnand: qcom: Update register macro name for 0x2c offset

[Md Sadre Alam]

This change will remove unused register name macro NAND_DEV1_ECC_CFG.
Since this register was only available in QPIC version 1.4.20 ipq40xx
and it was not used. In QPIC version 1.5 on wards this register got
removed.In QPIC version 2.0 0x2c offset is updated with register
NAND_AUTO_STATUS_EN So adding this register macro NAND_AUTO_STATUS_EN
with offset 0x2c.

Signed-off-by: Md Sadre Alam <mdalam@xxxxxxxxxxxxxx>
---
 drivers/mtd/nand/raw/qcom_nandc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 9484be8..c238a35 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -27,7 +27,7 @@
 #define	NAND_DEV0_CFG0			0x20
 #define	NAND_DEV0_CFG1			0x24
 #define	NAND_DEV0_ECC_CFG		0x28
-#define	NAND_DEV1_ECC_CFG		0x2c
+#define	NAND_AUTO_STATUS_EN		0x2c
 #define	NAND_DEV1_CFG0			0x30
 #define	NAND_DEV1_CFG1			0x34
 #define	NAND_READ_ID			0x40
-- 
2.7.4