Re: [PATCH v4 26/34] dt-bindings: misc: intel_tsens: Add tsens thermal bindings documentation

From: Rob Herring
Date: Sat Jan 30 2021 - 12:24:46 EST


On Fri, 29 Jan 2021 18:21:16 -0800, mgross@xxxxxxxxxxxxxxx wrote:
> From: "C, Udhayakumar" <udhayakumar.c@xxxxxxxxx>
>
> Add device tree bindings for local host thermal sensors
> Intel Edge.AI Computer Vision platforms.
>
> The tsens module enables reading of on chip sensors present
> in the Intel Bay series SoC. In the tsens module various junction
> temperature and SoC temperature are reported using thermal subsystem
> and i2c subsystem.
>
> Temperature data reported using thermal subsystem will be used for
> various cooling agents such as DVFS, fan control and shutdown the
> system in case of critical temperature.
>
> Temperature data reported using i2c subsytem will be used by
> platform manageability software running in remote host.
>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Acked-by: mark gross <mgross@xxxxxxxxxxxxxxx>
> Signed-off-by: C Udhayakumar <udhayakumar.c@xxxxxxxxx>
> Signed-off-by: Mark Gross <mgross@xxxxxxxxxxxxxxx>
> ---
> .../bindings/misc/intel,intel-tsens.yaml | 118 ++++++++++++++++++
> 1 file changed, 118 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/misc/intel,intel-tsens.yaml
>

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/misc/intel,intel-tsens.example.dt.yaml: example-0: tsens@20260000:reg:0: [0, 539361280, 0, 256] is too long
From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml

See https://patchwork.ozlabs.org/patch/1433609

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.