Re: [PATCH v4 2/2] counter: add IRQ or GPIO based pulse counter

[Oleksij Rempel]

On Thu, Jan 28, 2021 at 09:24:08AM +0100, Linus Walleij wrote:
> Hi Oleksij,
> 
> thanks for your patch!
> 
> On Tue, Jan 26, 2021 at 2:15 PM Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> wrote:
> 
> > +       priv->irq = platform_get_irq(pdev,  0);
> > +       if (priv->irq < 0) {
> > +               dev_err(dev, "failed to map GPIO to IRQ: %d\n", priv->irq);
> > +               return priv->irq;
> > +       }
> > +
> > +       priv->gpio = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
> > +       if (IS_ERR(priv->gpio))
> > +               return dev_err_probe(dev, PTR_ERR(priv->gpio), "failed to get gpio\n");
> 
> I would attempt to get the IRQ from the GPIO if not defined explicitly
> in the device tree.
> 
> priv->gpio = devm_gpiod_get_optional(...)
> if (priv->gpio) {
>     /* Attempt to look up IRQ */
>     irq = gpiod_to_irq(priv->irq);
> }
> priv->irq = platfform_get_irq(...)
> if (priv->irq < 0 && irq > 0) {
>     /* Use the GPIO-related IRQ */
>     priv->irq = irq;
> } else if (priv->irq < 0) {
>    /* Error */
> }
> 
> This way the example in the device tree binding which only defines
> a GPIO and no interrupt will work if the GPIO chip provides an
> IRQ mapping.
> 

Ok, thx!
I'll send updated version after dt-binding discussion

Regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |