Re: [PATCH v11] staging: fbtft: add tearing signal detect

From: Geert Uytterhoeven
Date: Wed Jan 27 2021 - 09:23:17 EST


Hi Carlis,

On Wed, Jan 27, 2021 at 3:07 PM Carlis <zhangxuezhi3@xxxxxxxxx> wrote:
> From: zhangxuezhi <zhangxuezhi1@xxxxxxxxxx>
>
> For st7789v ic,when we need continuous full screen refresh, it is best to
> wait for the TE signal arrive to avoid screen tearing
>
> Signed-off-by: zhangxuezhi <zhangxuezhi1@xxxxxxxxxx>
> ---
> v11: remove devm_gpio_put and change a dev_err to dev_info

> --- a/drivers/staging/fbtft/fb_st7789v.c
> +++ b/drivers/staging/fbtft/fb_st7789v.c

> @@ -82,6 +111,32 @@ enum st7789v_command {
> */
> static int init_display(struct fbtft_par *par)
> {
> + int rc;
> + struct device *dev = par->info->device;
> +
> + par->gpio.te = devm_gpiod_get_index_optional(dev, "te", 0, GPIOD_IN);
> + if (IS_ERR(par->gpio.te)) {
> + rc = PTR_ERR(par->gpio.te);
> + dev_info(par->info->device, "Failed to request te gpio: %d\n", rc);

Please slow down and read the feedback.
I said "dev_err_probe()", not "dev_info()".

> + return rc;
> + }
> + if (par->gpio.te) {
> + init_completion(&spi_panel_te);
> + mutex_init(&te_mutex);
> + rc = devm_request_irq(dev,
> + gpiod_to_irq(par->gpio.te),
> + spi_panel_te_handler, IRQF_TRIGGER_RISING,
> + "TE_GPIO", par);
> + if (rc) {
> + dev_err(par->info->device, "TE request_irq failed.\n");

Same here.

> + return rc;
> + }
> +
> + disable_irq_nosync(gpiod_to_irq(par->gpio.te));
> + } else {
> + dev_info(par->info->device, "%s:%d, TE gpio not specified\n",
> + __func__, __LINE__);
> + }
> /* turn off sleep mode */
> write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE);
> mdelay(120);

Gr{oetje,eeting}s,

Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds