RE: [PATCH v5 16/16] iommu/hyperv: setup an IO-APIC IRQ remapping domain for root partition

From: Michael Kelley
Date: Wed Jan 27 2021 - 01:09:42 EST

Next message: Dan Carpenter: "Re: [PATCH v5] fbtft: add tearing signal detect"
Previous message: Palmer Dabbelt: "Re: [PATCH v15 03/11] riscv/Kconfig: make direct map manipulation options depend on MMU"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Wei Liu <wei.liu@xxxxxxxxxx> Sent: Wednesday, January 20, 2021 4:01 AM
>
> Just like MSI/MSI-X, IO-APIC interrupts are remapped by Microsoft
> Hypervisor when Linux runs as the root partition. Implement an IRQ
> domain to handle mapping and unmapping of IO-APIC interrupts.
>
> Signed-off-by: Wei Liu <wei.liu@xxxxxxxxxx>
> ---
> arch/x86/hyperv/irqdomain.c | 54 ++++++++++
> arch/x86/include/asm/mshyperv.h | 4 +
> drivers/iommu/hyperv-iommu.c | 179 +++++++++++++++++++++++++++++++-
> 3 files changed, 233 insertions(+), 4 deletions(-)
>
> diff --git a/arch/x86/hyperv/irqdomain.c b/arch/x86/hyperv/irqdomain.c
> index 19637cd60231..8e2b4e478b70 100644
> --- a/arch/x86/hyperv/irqdomain.c
> +++ b/arch/x86/hyperv/irqdomain.c
> @@ -330,3 +330,57 @@ struct irq_domain * __init hv_create_pci_msi_domain(void)
> }
>
> #endif /* CONFIG_PCI_MSI */
> +
> +int hv_unmap_ioapic_interrupt(int ioapic_id, struct hv_interrupt_entry *entry)
> +{
> + union hv_device_id device_id;
> +
> + device_id.as_uint64 = 0;
> + device_id.device_type = HV_DEVICE_TYPE_IOAPIC;
> + device_id.ioapic.ioapic_id = (u8)ioapic_id;
> +
> + return hv_unmap_interrupt(device_id.as_uint64, entry) & HV_HYPERCALL_RESULT_MASK;

The masking is already done in hv_unmap_interrupt.

> +}
> +EXPORT_SYMBOL_GPL(hv_unmap_ioapic_interrupt);
> +
> +int hv_map_ioapic_interrupt(int ioapic_id, bool level, int vcpu, int vector,
> + struct hv_interrupt_entry *entry)
> +{
> + unsigned long flags;
> + struct hv_input_map_device_interrupt *input;
> + struct hv_output_map_device_interrupt *output;
> + union hv_device_id device_id;
> + struct hv_device_interrupt_descriptor *intr_desc;
> + u16 status;
> +
> + device_id.as_uint64 = 0;
> + device_id.device_type = HV_DEVICE_TYPE_IOAPIC;
> + device_id.ioapic.ioapic_id = (u8)ioapic_id;
> +
> + local_irq_save(flags);
> + input = *this_cpu_ptr(hyperv_pcpu_input_arg);
> + output = *this_cpu_ptr(hyperv_pcpu_output_arg);
> + memset(input, 0, sizeof(*input));
> + intr_desc = &input->interrupt_descriptor;
> + input->partition_id = hv_current_partition_id;
> + input->device_id = device_id.as_uint64;
> + intr_desc->interrupt_type = HV_X64_INTERRUPT_TYPE_FIXED;
> + intr_desc->target.vector = vector;
> + intr_desc->vector_count = 1;
> +
> + if (level)
> + intr_desc->trigger_mode = HV_INTERRUPT_TRIGGER_MODE_LEVEL;
> + else
> + intr_desc->trigger_mode = HV_INTERRUPT_TRIGGER_MODE_EDGE;
> +
> + __set_bit(vcpu, (unsigned long *)&intr_desc->target.vp_mask);
> +
> + status = hv_do_rep_hypercall(HVCALL_MAP_DEVICE_INTERRUPT, 0, 0, input, output) &
> + HV_HYPERCALL_RESULT_MASK;
> + local_irq_restore(flags);
> +
> + *entry = output->interrupt_entry;
> +
> + return status;

As a cross-check, I was comparing this code against hv_map_msi_interrupt(). They are
mostly parallel, though some of the assignments are done in a different order. It's a nit,
but making them as parallel as possible would be nice. :-)

Same 64 vCPU comment applies here as well.

> +}
> +EXPORT_SYMBOL_GPL(hv_map_ioapic_interrupt);
> diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
> index ccc849e25d5e..345d7c6f8c37 100644
> --- a/arch/x86/include/asm/mshyperv.h
> +++ b/arch/x86/include/asm/mshyperv.h
> @@ -263,6 +263,10 @@ static inline void hv_set_msi_entry_from_desc(union
> hv_msi_entry *msi_entry,
>
> struct irq_domain *hv_create_pci_msi_domain(void);
>
> +int hv_map_ioapic_interrupt(int ioapic_id, bool level, int vcpu, int vector,
> + struct hv_interrupt_entry *entry);
> +int hv_unmap_ioapic_interrupt(int ioapic_id, struct hv_interrupt_entry *entry);
> +
> #else /* CONFIG_HYPERV */
> static inline void hyperv_init(void) {}
> static inline void hyperv_setup_mmu_ops(void) {}
> diff --git a/drivers/iommu/hyperv-iommu.c b/drivers/iommu/hyperv-iommu.c
> index b7db6024e65c..6d35e4c303c6 100644
> --- a/drivers/iommu/hyperv-iommu.c
> +++ b/drivers/iommu/hyperv-iommu.c
> @@ -116,30 +116,43 @@ static const struct irq_domain_ops hyperv_ir_domain_ops = {
> .free = hyperv_irq_remapping_free,
> };
>
> +static const struct irq_domain_ops hyperv_root_ir_domain_ops;
> static int __init hyperv_prepare_irq_remapping(void)
> {
> struct fwnode_handle *fn;
> int i;
> + const char *name;
> + const struct irq_domain_ops *ops;
>
> if (!hypervisor_is_type(X86_HYPER_MS_HYPERV) ||
> x86_init.hyper.msi_ext_dest_id() ||
> - !x2apic_supported() || hv_root_partition)
> + !x2apic_supported())

Any reason that the check for hv_root_partition was added
in patch #4 of this series, and then removed here? Could
patch #4 just be dropped?

> return -ENODEV;
>
> - fn = irq_domain_alloc_named_id_fwnode("HYPERV-IR", 0);
> + if (hv_root_partition) {
> + name = "HYPERV-ROOT-IR";
> + ops = &hyperv_root_ir_domain_ops;
> + } else {
> + name = "HYPERV-IR";
> + ops = &hyperv_ir_domain_ops;
> + }
> +
> + fn = irq_domain_alloc_named_id_fwnode(name, 0);
> if (!fn)
> return -ENOMEM;
>
> ioapic_ir_domain =
> irq_domain_create_hierarchy(arch_get_ir_parent_domain(),
> - 0, IOAPIC_REMAPPING_ENTRY, fn,
> - &hyperv_ir_domain_ops, NULL);
> + 0, IOAPIC_REMAPPING_ENTRY, fn, ops, NULL);
>
> if (!ioapic_ir_domain) {
> irq_domain_free_fwnode(fn);
> return -ENOMEM;
> }
>
> + if (hv_root_partition)
> + return 0; /* The rest is only relevant to guests */
> +
> /*
> * Hyper-V doesn't provide irq remapping function for
> * IO-APIC and so IO-APIC only accepts 8-bit APIC ID.
> @@ -167,4 +180,162 @@ struct irq_remap_ops hyperv_irq_remap_ops = {
> .enable = hyperv_enable_irq_remapping,
> };
>
> +/* IRQ remapping domain when Linux runs as the root partition */
> +struct hyperv_root_ir_data {
> + u8 ioapic_id;
> + bool is_level;
> + struct hv_interrupt_entry entry;
> +};
> +
> +static void
> +hyperv_root_ir_compose_msi_msg(struct irq_data *irq_data, struct msi_msg *msg)
> +{
> + u16 status;
> + u32 vector;
> + struct irq_cfg *cfg;
> + int ioapic_id;
> + struct cpumask *affinity;
> + int cpu, vcpu;
> + struct hv_interrupt_entry entry;
> + struct hyperv_root_ir_data *data = irq_data->chip_data;
> + struct IO_APIC_route_entry e;
> +
> + cfg = irqd_cfg(irq_data);
> + affinity = irq_data_get_effective_affinity_mask(irq_data);
> + cpu = cpumask_first_and(affinity, cpu_online_mask);
> + vcpu = hv_cpu_number_to_vp_number(cpu);
> +
> + vector = cfg->vector;
> + ioapic_id = data->ioapic_id;
> +
> + if (data->entry.source == HV_DEVICE_TYPE_IOAPIC

Does 'data' need to be checked to be non-NULL? The parallel code in
hv_irq_compose_msi_msg() makes such a check.

> + && data->entry.ioapic_rte.as_uint64) {
> + entry = data->entry;
> +
> + status = hv_unmap_ioapic_interrupt(ioapic_id, &entry);
> +
> + if (status != HV_STATUS_SUCCESS)
> + pr_debug("%s: unexpected unmap status %d\n", __func__, status);
> +
> + data->entry.ioapic_rte.as_uint64 = 0;
> + data->entry.source = 0; /* Invalid source */

Again comparing, hv_irq_compose_msi_msg() frees the old
entry, and then allocates a new one. This code reuses the old entry.
Any reason for the difference?

> + }
> +
> +
> + status = hv_map_ioapic_interrupt(ioapic_id, data->is_level, vcpu,
> + vector, &entry);
> +
> + if (status != HV_STATUS_SUCCESS) {
> + pr_err("%s: map hypercall failed, status %d\n", __func__, status);
> + return;
> + }
> +
> + data->entry = entry;
> +
> + /* Turn it into an IO_APIC_route_entry, and generate MSI MSG. */
> + e.w1 = entry.ioapic_rte.low_uint32;
> + e.w2 = entry.ioapic_rte.high_uint32;
> +
> + memset(msg, 0, sizeof(*msg));
> + msg->arch_data.vector = e.vector;
> + msg->arch_data.delivery_mode = e.delivery_mode;
> + msg->arch_addr_lo.dest_mode_logical = e.dest_mode_logical;
> + msg->arch_addr_lo.dmar_format = e.ir_format;
> + msg->arch_addr_lo.dmar_index_0_14 = e.ir_index_0_14;
> +}

Having this whole function be more parallel to hv_irq_compose_msi_msg()
would be nice. :-)

> +
> +static int hyperv_root_ir_set_affinity(struct irq_data *data,
> + const struct cpumask *mask, bool force)
> +{
> + struct irq_data *parent = data->parent_data;
> + struct irq_cfg *cfg = irqd_cfg(data);
> + int ret;
> +
> + ret = parent->chip->irq_set_affinity(parent, mask, force);
> + if (ret < 0 || ret == IRQ_SET_MASK_OK_DONE)
> + return ret;
> +
> + send_cleanup_vector(cfg);
> +
> + return 0;
> +}
> +
> +static struct irq_chip hyperv_root_ir_chip = {
> + .name = "HYPERV-ROOT-IR",
> + .irq_ack = apic_ack_irq,
> + .irq_set_affinity = hyperv_root_ir_set_affinity,
> + .irq_compose_msi_msg = hyperv_root_ir_compose_msi_msg,
> +};
> +
> +static int hyperv_root_irq_remapping_alloc(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs,
> + void *arg)
> +{
> + struct irq_alloc_info *info = arg;
> + struct irq_data *irq_data;
> + struct hyperv_root_ir_data *data;
> + int ret = 0;
> +
> + if (!info || info->type != X86_IRQ_ALLOC_TYPE_IOAPIC || nr_irqs > 1)
> + return -EINVAL;
> +
> + ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
> + if (ret < 0)
> + return ret;
> +
> + data = kzalloc(sizeof(*data), GFP_KERNEL);
> + if (!data) {
> + irq_domain_free_irqs_common(domain, virq, nr_irqs);
> + return -ENOMEM;
> + }
> +
> + irq_data = irq_domain_get_irq_data(domain, virq);
> + if (!irq_data) {
> + kfree(data);
> + irq_domain_free_irqs_common(domain, virq, nr_irqs);
> + return -EINVAL;
> + }
> +
> + data->ioapic_id = info->devid;
> + data->is_level = info->ioapic.is_level;
> +
> + irq_data->chip = &hyperv_root_ir_chip;
> + irq_data->chip_data = data;
> +
> + return 0;
> +}
> +
> +static void hyperv_root_irq_remapping_free(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs)
> +{
> + struct irq_data *irq_data;
> + struct hyperv_root_ir_data *data;
> + struct hv_interrupt_entry *e;
> + int i;
> +
> + for (i = 0; i < nr_irqs; i++) {
> + irq_data = irq_domain_get_irq_data(domain, virq + i);
> +
> + if (irq_data && irq_data->chip_data) {
> + data = irq_data->chip_data;

Set irq_data->chip_data to NULL? That seems to be done in other
similar places in your code.

> + e = &data->entry;
> +
> + if (e->source == HV_DEVICE_TYPE_IOAPIC
> + && e->ioapic_rte.as_uint64)
> + hv_unmap_ioapic_interrupt(data->ioapic_id,
> + &data->entry);
> +
> + kfree(data);
> + }
> + }
> +
> + irq_domain_free_irqs_common(domain, virq, nr_irqs);
> +}
> +
> +static const struct irq_domain_ops hyperv_root_ir_domain_ops = {
> + .select = hyperv_irq_remapping_select,
> + .alloc = hyperv_root_irq_remapping_alloc,
> + .free = hyperv_root_irq_remapping_free,
> +};
> +
> #endif
> --
> 2.20.1

Next message: Dan Carpenter: "Re: [PATCH v5] fbtft: add tearing signal detect"
Previous message: Palmer Dabbelt: "Re: [PATCH v15 03/11] riscv/Kconfig: make direct map manipulation options depend on MMU"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]