Re: [PATCH 2/3] media: i2c: adv7511: remove open coded version of SMBus block read

[Hans Verkuil]

On 19/01/2021 10:39, Wolfram Sang wrote:
> The open coded version differs from the one in the core in one way: the
> buffer will be always copied back, even when the transfer failed. Be
> more robust: use the block read from the I2C core and propagate a
> potential errno further to the sanity checks.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
> ---
> 
> Changes since RFC:
> * removed wrong assumption from the commit message
> 
>  drivers/media/i2c/adv7511-v4l2.c | 41 ++++++++++++--------------------
>  1 file changed, 15 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv7511-v4l2.c b/drivers/media/i2c/adv7511-v4l2.c
> index a3161d709015..441bafa743a6 100644
> --- a/drivers/media/i2c/adv7511-v4l2.c
> +++ b/drivers/media/i2c/adv7511-v4l2.c
> @@ -214,36 +214,25 @@ static inline void adv7511_wr_and_or(struct v4l2_subdev *sd, u8 reg, u8 clr_mask
>  	adv7511_wr(sd, reg, (adv7511_rd(sd, reg) & clr_mask) | val_mask);
>  }
>  
> -static int adv_smbus_read_i2c_block_data(struct i2c_client *client,
> -					 u8 command, unsigned length, u8 *values)
> -{
> -	union i2c_smbus_data data;
> -	int ret;
> -
> -	if (length > I2C_SMBUS_BLOCK_MAX)
> -		length = I2C_SMBUS_BLOCK_MAX;
> -	data.block[0] = length;
> -
> -	ret = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
> -			     I2C_SMBUS_READ, command,
> -			     I2C_SMBUS_I2C_BLOCK_DATA, &data);
> -	memcpy(values, data.block + 1, length);
> -	return ret;
> -}
> -
> -static void adv7511_edid_rd(struct v4l2_subdev *sd, uint16_t len, uint8_t *buf)
> +static int adv7511_edid_rd(struct v4l2_subdev *sd, uint16_t len, uint8_t *buf)
>  {
>  	struct adv7511_state *state = get_adv7511_state(sd);
>  	int i;
> -	int err = 0;
>  
>  	v4l2_dbg(1, debug, sd, "%s:\n", __func__);
>  
> -	for (i = 0; !err && i < len; i += I2C_SMBUS_BLOCK_MAX)
> -		err = adv_smbus_read_i2c_block_data(state->i2c_edid, i,
> +	for (i = 0; i < len; i += I2C_SMBUS_BLOCK_MAX) {
> +		s32 ret;
> +
> +		ret = i2c_smbus_read_i2c_block_data(state->i2c_edid, i,
>  						    I2C_SMBUS_BLOCK_MAX, buf + i);
> -	if (err)
> -		v4l2_err(sd, "%s: i2c read error\n", __func__);
> +		if (ret < 0) {
> +			v4l2_err(sd, "%s: i2c read error\n", __func__);
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
>  }
>  
>  static inline int adv7511_cec_read(struct v4l2_subdev *sd, u8 reg)
> @@ -1668,20 +1657,20 @@ static bool adv7511_check_edid_status(struct v4l2_subdev *sd)
>  	if (edidRdy & MASK_ADV7511_EDID_RDY) {
>  		int segment = adv7511_rd(sd, 0xc4);
>  		struct adv7511_edid_detect ed;
> +		int err;
>  
>  		if (segment >= EDID_MAX_SEGM) {
>  			v4l2_err(sd, "edid segment number too big\n");
>  			return false;
>  		}
>  		v4l2_dbg(1, debug, sd, "%s: got segment %d\n", __func__, segment);
> -		adv7511_edid_rd(sd, 256, &state->edid.data[segment * 256]);
> +		err = adv7511_edid_rd(sd, 256, &state->edid.data[segment * 256]);
>  		adv7511_dbg_dump_edid(2, debug, sd, segment, &state->edid.data[segment * 256]);

Only call adv7511_dbg_dump_edid if err >= 0.

>  		if (segment == 0) {

Change condition to: err >= 0 && segment == 0

>  			state->edid.blocks = state->edid.data[0x7e] + 1;
>  			v4l2_dbg(1, debug, sd, "%s: %d blocks in total\n", __func__, state->edid.blocks);
>  		}
> -		if (!edid_verify_crc(sd, segment) ||
> -		    !edid_verify_header(sd, segment)) {
> +		if (err < 0 || !edid_verify_crc(sd, segment) || !edid_verify_header(sd, segment)) {
>  			/* edid crc error, force reread of edid segment */

Hmm, this comment is a bit out of date. Change to:

			/*
			 * Couldn't read EDID or EDID has invalid content.
			 * Force reread of EDID segment.
			 */

>  			v4l2_err(sd, "%s: edid crc or header error\n", __func__);

Only show this message if err >= 0. For err < 0 the adv7511_edid_rd() already
logs an error.

>  			state->have_monitor = false;
> 

Regards,

	Hans