Re: [PATCH 3/4] phy: qcom-qmp: Add UFS v4 registers found in SM8350

[Bjorn Andersson]

On Mon 25 Jan 04:09 CST 2021, Vinod Koul wrote:

> Add the registers for few new registers found in SM8350. Also the UFS
> phy used in SM8350 seems to have different offsets than V4 phy, although
> it claims it is v4 phy, so add the new offsets with SM8350 tag instead
> of V4 tag.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>

> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp.h | 27 +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
> index dff7be5a1cc1..bba1d5e3eb73 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.h
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
> @@ -451,6 +451,7 @@
>  #define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX 		0x40
>  #define QSERDES_V4_TX_LANE_MODE_1			0x84
>  #define QSERDES_V4_TX_LANE_MODE_2			0x88
> +#define QSERDES_V4_TX_LANE_MODE_3			0x8C
>  #define QSERDES_V4_TX_RCV_DETECT_LVL_2			0x9c
>  #define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1	0xd8
>  #define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1	0xdC
> @@ -459,6 +460,13 @@
>  #define QSERDES_V4_TX_TRAN_DRVR_EMP_EN			0xb8
>  #define QSERDES_V4_TX_PI_QEC_CTRL		0x104
>  
> +/* Only for SM8350 QMP V4 Phy TX offsets different from V4 */
> +#define QSERDES_SM8350_TX_PWM_GEAR_1_DIVIDER_BAND0_1	0x178
> +#define QSERDES_SM8350_TX_PWM_GEAR_2_DIVIDER_BAND0_1	0x17c
> +#define QSERDES_SM8350_TX_PWM_GEAR_3_DIVIDER_BAND0_1	0x180
> +#define QSERDES_SM8350_TX_PWM_GEAR_4_DIVIDER_BAND0_1	0x184
> +#define QSERDES_SM8350_TX_TRAN_DRVR_EMP_EN		0xc0
> +
>  /* Only for QMP V4 PHY - RX registers */
>  #define QSERDES_V4_RX_UCDR_FO_GAIN			0x008
>  #define QSERDES_V4_RX_UCDR_SO_GAIN			0x014
> @@ -514,6 +522,24 @@
>  #define QSERDES_V4_RX_DCC_CTRL1				0x1bc
>  #define QSERDES_V4_RX_VTH_CODE				0x1c4
>  
> +/* Only for SM8350 QMP V4 Phy RX offsets different from V4 */
> +#define QSERDES_SM8350_RX_RX_MODE_00_LOW		0x15c
> +#define QSERDES_SM8350_RX_RX_MODE_00_HIGH		0x160
> +#define QSERDES_SM8350_RX_RX_MODE_00_HIGH2		0x164
> +#define QSERDES_SM8350_RX_RX_MODE_00_HIGH3		0x168
> +#define QSERDES_SM8350_RX_RX_MODE_00_HIGH4		0x16c
> +#define QSERDES_SM8350_RX_RX_MODE_01_LOW		0x170
> +#define QSERDES_SM8350_RX_RX_MODE_01_HIGH		0x174
> +#define QSERDES_SM8350_RX_RX_MODE_01_HIGH2		0x178
> +#define QSERDES_SM8350_RX_RX_MODE_01_HIGH3		0x17c
> +#define QSERDES_SM8350_RX_RX_MODE_01_HIGH4		0x180
> +#define QSERDES_SM8350_RX_RX_MODE_10_LOW		0x184
> +#define QSERDES_SM8350_RX_RX_MODE_10_HIGH		0x188
> +#define QSERDES_SM8350_RX_RX_MODE_10_HIGH2		0x18c
> +#define QSERDES_SM8350_RX_RX_MODE_10_HIGH3		0x190
> +#define QSERDES_SM8350_RX_RX_MODE_10_HIGH4		0x194
> +#define QSERDES_SM8350_RX_DCC_CTRL1			0x1a8
> +
>  /* Only for QMP V4 PHY - UFS PCS registers */
>  #define QPHY_V4_PCS_UFS_PHY_START				0x000
>  #define QPHY_V4_PCS_UFS_POWER_DOWN_CONTROL			0x004
> @@ -529,6 +555,7 @@
>  #define QPHY_V4_PCS_UFS_DEBUG_BUS_CLKSEL			0x124
>  #define QPHY_V4_PCS_UFS_LINECFG_DISABLE				0x148
>  #define QPHY_V4_PCS_UFS_RX_MIN_HIBERN8_TIME			0x150
> +#define QPHY_V4_PCS_UFS_RX_SIGDET_CTRL1				0x154
>  #define QPHY_V4_PCS_UFS_RX_SIGDET_CTRL2				0x158
>  #define QPHY_V4_PCS_UFS_TX_PWM_GEAR_BAND			0x160
>  #define QPHY_V4_PCS_UFS_TX_HS_GEAR_BAND				0x168
> -- 
> 2.26.2
>