Re: [PATCH V4 4/4] virtio-mem: check against mhp_get_pluggable_range() which memory we can hotplug

From: David Hildenbrand
Date: Mon Jan 25 2021 - 07:22:42 EST


On 25.01.21 03:58, Anshuman Khandual wrote:
> From: David Hildenbrand <david@xxxxxxxxxx>
>
> Right now, we only check against MAX_PHYSMEM_BITS - but turns out there
> are more restrictions of which memory we can actually hotplug, especially
> om arm64 or s390x once we support them: we might receive something like
> -E2BIG or -ERANGE from add_memory_driver_managed(), stopping device
> operation.
>
> So, check right when initializing the device which memory we can add,
> warning the user. Try only adding actually pluggable ranges: in the worst
> case, no memory provided by our device is pluggable.
>
> In the usual case, we expect all device memory to be pluggable, and in
> corner cases only some memory at the end of the device-managed memory
> region to not be pluggable.
>
> Cc: "Michael S. Tsirkin" <mst@xxxxxxxxxx>
> Cc: Jason Wang <jasowang@xxxxxxxxxx>
> Cc: Pankaj Gupta <pankaj.gupta.linux@xxxxxxxxx>
> Cc: Oscar Salvador <osalvador@xxxxxxx>
> Cc: Wei Yang <richard.weiyang@xxxxxxxxxxxxxxxxx>
> Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> Cc: catalin.marinas@xxxxxxx
> Cc: teawater <teawaterz@xxxxxxxxxxxxxxxxx>
> Cc: Anshuman Khandual <anshuman.khandual@xxxxxxx>
> Cc: Pankaj Gupta <pankaj.gupta@xxxxxxxxxxxxxxx>
> Cc: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> Cc: hca@xxxxxxxxxxxxx
> Cc: Vasily Gorbik <gor@xxxxxxxxxxxxx>
> Cc: Will Deacon <will@xxxxxxxxxx>
> Cc: Ard Biesheuvel <ardb@xxxxxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Heiko Carstens <hca@xxxxxxxxxxxxx>
> Cc: Michal Hocko <mhocko@xxxxxxxxxx>
> Signed-off-by: David Hildenbrand <david@xxxxxxxxxx>
> Signed-off-by: Anshuman Khandual <anshuman.khandual@xxxxxxx>
> ---
> drivers/virtio/virtio_mem.c | 40 +++++++++++++++++++++++++------------
> 1 file changed, 27 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c
> index 9fc9ec4a25f5..14c17c5c1695 100644
> --- a/drivers/virtio/virtio_mem.c
> +++ b/drivers/virtio/virtio_mem.c
> @@ -2222,7 +2222,7 @@ static int virtio_mem_unplug_pending_mb(struct virtio_mem *vm)
> */
> static void virtio_mem_refresh_config(struct virtio_mem *vm)
> {
> - const uint64_t phys_limit = 1UL << MAX_PHYSMEM_BITS;
> + const struct range pluggable_range = mhp_get_pluggable_range(true);
> uint64_t new_plugged_size, usable_region_size, end_addr;
>
> /* the plugged_size is just a reflection of what _we_ did previously */
> @@ -2234,15 +2234,25 @@ static void virtio_mem_refresh_config(struct virtio_mem *vm)
> /* calculate the last usable memory block id */
> virtio_cread_le(vm->vdev, struct virtio_mem_config,
> usable_region_size, &usable_region_size);
> - end_addr = vm->addr + usable_region_size;
> - end_addr = min(end_addr, phys_limit);
> + end_addr = min(vm->addr + usable_region_size - 1,
> + pluggable_range.end);
>
> - if (vm->in_sbm)
> - vm->sbm.last_usable_mb_id =
> - virtio_mem_phys_to_mb_id(end_addr) - 1;
> - else
> - vm->bbm.last_usable_bb_id =
> - virtio_mem_phys_to_bb_id(vm, end_addr) - 1;
> + if (vm->in_sbm) {
> + vm->sbm.last_usable_mb_id = virtio_mem_phys_to_mb_id(end_addr);
> + if (!IS_ALIGNED(end_addr + 1, memory_block_size_bytes()))
> + vm->sbm.last_usable_mb_id--;
> + } else {
> + vm->bbm.last_usable_bb_id = virtio_mem_phys_to_bb_id(vm,
> + end_addr);
> + if (!IS_ALIGNED(end_addr + 1, vm->bbm.bb_size))
> + vm->bbm.last_usable_bb_id--;
> + }
> + /*
> + * If we cannot plug any of our device memory (e.g., nothing in the
> + * usable region is addressable), the last usable memory block id will
> + * be smaller than the first usable memory block id. We'll stop
> + * attempting to add memory with -ENOSPC from our main loop.
> + */
>
> /* see if there is a request to change the size */
> virtio_cread_le(vm->vdev, struct virtio_mem_config, requested_size,
> @@ -2364,6 +2374,7 @@ static int virtio_mem_init_vq(struct virtio_mem *vm)
>
> static int virtio_mem_init(struct virtio_mem *vm)
> {
> + const struct range pluggable_range = mhp_get_pluggable_range(true);
> const uint64_t phys_limit = 1UL << MAX_PHYSMEM_BITS;

Sorry, forgot to drop ^ (phys_limit), otherwise ther is a friendly
warning from the compiler. We have to drop that line.



Apart from that, at least on x86-64 it does what it's supposed to do. I
temporarily changed MAX_PHYSMEM_BITS to 35 bits and added a virtio-mem
device that crosses the 32 GiB address limit.


[ 0.572084] virtio_mem virtio1: Some device memory is not
addressable/pluggable. This can make some memory unusable.
[ 0.573013] virtio_mem virtio1: start address: 0x740000000
[ 0.573497] virtio_mem virtio1: region size: 0x500000000


And virtio-mem won't add any memory exceeding that:

(qemu) qom-set vmem0 requested-size 20G
(qemu) info memory-devices
Memory device [virtio-mem]: "vmem0"
[...]
Memory device [virtio-mem]: "vmem1"
memaddr: 0x740000000
node: 1
requested-size: 21474836480
size: 3221225472
max-size: 21474836480
block-size: 2097152
memdev: /objects/mem1

I adds all memory up to the 32GiB address limit (35 bits) and stops.

LGTM (arm64 to be tested in the future once supported).

--
Thanks,

David / dhildenb