Re: [PATCH v2 12/12][RESEND] iio: buffer: add ioctl() to support opening extra buffers for IIO device

From: Jonathan Cameron
Date: Sun Jan 24 2021 - 13:39:55 EST

Next message: Marc Zyngier: "Re: [PATCH v4 18/21] arm64: Move "nokaslr" over to the early cpufeature infrastructure"
Previous message: pr-tracker-bot: "Re: [GIT PULL] misc fixes for v5.11-rc5"
Next in thread: Alexandru Ardelean: "Re: [PATCH v2 12/12][RESEND] iio: buffer: add ioctl() to support opening extra buffers for IIO device"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, 22 Jan 2021 18:25:29 +0200
Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx> wrote:

> With this change, an ioctl() call is added to open a character device for a
> buffer.
> The ioctl() will return a 0 FD for the first buffer, as that FD for buffer0
> is the same FD as the one used for this ioctl().
>
> For any other extra buffer, this ioctl() will return an anon inode FD that
> would access any extra buffer.
>
> Right now, there doesn't seem to be (or I couldn't find) a way for this
> ioctl() to return the FD for buffer0 (i.e. to return the same FD as used
> for the ioctl()).
> So, usespace would need to know that ioctl(fd,
> IIO_BUFFER_GET_BUFFER_COUNT, 0) will return FD 0.
> We could also return another FD for buffer 0, but duplicating FDs for the
> same IIO buffer sounds problematic.

Agreed. For now this is fine. Userspace doing that request is a bit
odd in general even if I can see it might be convenient.

Hohum. Now in theory ioctl numbers should be added to
Documentation/userspace-api/ioctl/ioctl-number.rst but oops
seems I never added the one we already use.

Seems no one is using the block we are though so should be fine.
If you fancy adding this one and the event one we already have that would be great.
Perhaps we are allowing a bit too much space though given the
event one is down at 'i', 0x90 and this is 'i', 0xB0

We'll probably hit something undocumented anyway ;)

So from a fairly light level of read through this seems to have come together
nicely. I'm a bit nervous about the sysfs kobject stuff, but it seems there
are other places where similar stuff happens so if Rafael and Greg don't come
back with major comments that should be fine.

Jonathan

>
> Also, there is no IIO_BUFFER_GET_BUFFER_COUNT ioctl() implemented, as the
> index for each buffer (and the count) can be deduced from the
> '/sys/bus/iio/devices/iio:deviceX/bufferY' folders (i.e the number of
> bufferY folders).
>
> Used following C code to test this:
> -------------------------------------------------------------------
>
> #include <stdio.h>
> #include <stdlib.h>
> #include <unistd.h>
> #include <sys/ioctl.h>
> #include <fcntl.h"
> #include <errno.h>
>
> #define IIO_BUFFER_GET_FD_IOCTL _IOWR('i', 0xb0, int)
>
> int main(int argc, char *argv[])
> {
> int fd;
> int fd1;
> int ret;
>
> if ((fd = open("/dev/iio:device0", O_RDWR))<0) {
> fprintf(stderr, "Error open() %d errno %d\n",fd, errno);
> return -1;
> }
>
> fprintf(stderr, "Using FD %d\n", fd);
>
> fd1 = atoi(argv[1]);
>
> ret = ioctl(fd, IIO_BUFFER_GET_FD_IOCTL, &fd1);
> if (ret < 0) {
> fprintf(stderr, "Error for buffer %d ioctl() %d errno %d\n", fd1, ret, errno);
> close(fd);
> return -1;
> }
>
> fprintf(stderr, "Got FD %d\n", fd1);
>
> close(fd1);
> close(fd);
>
> return 0;
> }
> -------------------------------------------------------------------
>
> Results are:
> -------------------------------------------------------------------
> # ./test 0
> Using FD 3
> Got FD 0
>
> # ./test 1
> Using FD 3
> Got FD 4
>
> # ./test 2
> Using FD 3
> Got FD 4
>
> # ./test 3
> Using FD 3
> Got FD 4
>
> # ls /sys/bus/iio/devices/iio\:device0
> buffer buffer0 buffer1 buffer2 buffer3 dev
> in_voltage_sampling_frequency in_voltage_scale
> in_voltage_scale_available
> name of_node power scan_elements subsystem uevent
> -------------------------------------------------------------------
>
> iio:device0 has some fake kfifo buffers attached to an IIO device.
>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
> ---
> drivers/iio/industrialio-buffer.c | 119 ++++++++++++++++++++++++++++++
> drivers/iio/industrialio-core.c | 8 ++
> include/linux/iio/buffer_impl.h | 5 ++
> include/linux/iio/iio-opaque.h | 2 +
> include/uapi/linux/iio/buffer.h | 10 +++
> 5 files changed, 144 insertions(+)
> create mode 100644 include/uapi/linux/iio/buffer.h
>
> diff --git a/drivers/iio/industrialio-buffer.c b/drivers/iio/industrialio-buffer.c
> index 2f429616e998..e619ec35c431 100644
> --- a/drivers/iio/industrialio-buffer.c
> +++ b/drivers/iio/industrialio-buffer.c
> @@ -9,6 +9,7 @@
> * - Better memory allocation techniques?
> * - Alternative access techniques?
> */
> +#include <linux/anon_inodes.h>
> #include <linux/kernel.h>
> #include <linux/export.h>
> #include <linux/device.h>
> @@ -1399,6 +1400,106 @@ static void iio_sysfs_del_attrs(struct kobject *kobj, struct attribute **ptr)
> sysfs_remove_file(kobj, ptr[i]);
> }
>
> +static int iio_buffer_chrdev_release(struct inode *inode, struct file *filep)
> +{
> + struct iio_dev_buffer_pair *ib = filep->private_data;
> + struct iio_dev *indio_dev = ib->indio_dev;
> + struct iio_buffer *buffer = ib->buffer;
> +
> + clear_bit(IIO_BUSY_BIT_POS, &buffer->flags);
> + iio_device_put(indio_dev);
> + kfree(ib);
> +
> + return 0;
> +}
> +
> +static const struct file_operations iio_buffer_chrdev_fileops = {
> + .owner = THIS_MODULE,
> + .llseek = noop_llseek,
> + .read = iio_buffer_read_outer_addr,
> + .poll = iio_buffer_poll_addr,
> + .compat_ioctl = compat_ptr_ioctl,
> + .release = iio_buffer_chrdev_release,
> +};
> +
> +static long iio_device_buffer_getfd(struct iio_dev *indio_dev, unsigned long arg)
> +{
> + struct iio_dev_opaque *iio_dev_opaque = to_iio_dev_opaque(indio_dev);
> + int __user *ival = (int __user *)arg;
> + char buf_name[sizeof("iio:buffer:xxx")];
> + struct iio_dev_buffer_pair *ib;
> + struct iio_buffer *buffer;
> + int fd, idx;
> +
> + if (copy_from_user(&idx, ival, sizeof(idx)))
> + return -EFAULT;
> +
> + if (idx == 0) {
> + fd = 0;
> + if (copy_to_user(ival, &fd, sizeof(fd)))
> + return -EFAULT;
> + return 0;
> + }
> +
> + if (idx >= iio_dev_opaque->attached_buffers_cnt)
> + return -ENOENT;
> +
> + fd = mutex_lock_interruptible(&indio_dev->mlock);
> + if (fd)
> + return fd;
> +
> + buffer = iio_dev_opaque->attached_buffers[idx];
> +
> + if (test_and_set_bit(IIO_BUSY_BIT_POS, &buffer->flags)) {
> + fd = -EBUSY;
> + goto error_unlock;
> + }
> +
> + iio_device_get(indio_dev);
> +
> + ib = kzalloc(sizeof(*ib), GFP_KERNEL);
> + if (!ib) {
> + fd = -ENOMEM;
> + goto error_iio_dev_put;
> + }
> +
> + ib->indio_dev = indio_dev;
> + ib->buffer = buffer;
> +
> + fd = anon_inode_getfd(buf_name, &iio_buffer_chrdev_fileops,
> + ib, O_RDWR | O_CLOEXEC);
> + if (fd < 0)
> + goto error_free_ib;
> +
> + if (copy_to_user(ival, &fd, sizeof(fd))) {
> + fd = -EFAULT;
> + goto error_free_ib;
> + }
> +
> + mutex_unlock(&indio_dev->mlock);
> + return fd;
> +
> +error_free_ib:
> + kfree(ib);
> +error_iio_dev_put:
> + iio_device_put(indio_dev);
> + clear_bit(IIO_BUSY_BIT_POS, &buffer->flags);
> +error_unlock:
> + mutex_unlock(&indio_dev->mlock);
> + return fd;
> +}
> +
> +static long iio_device_buffer_ioctl(struct iio_dev *indio_dev, struct file *filp,
> + unsigned int cmd, unsigned long arg)
> +{
> + switch (cmd) {
> + case IIO_BUFFER_GET_FD_IOCTL:
> + return iio_device_buffer_getfd(indio_dev, arg);
> + default:
> + return IIO_IOCTL_UNHANDLED;
> + }
> +}
> +
> /**
> * __iio_buffer_alloc_sysfs_and_mask() - Allocate sysfs attributes to an attached buffer
> * @buffer: the buffer object for which the sysfs attributes are created for
> @@ -1565,6 +1666,7 @@ int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
> struct iio_buffer *buffer = indio_dev->buffer;
> const struct iio_chan_spec *channels;
> int i, cnt, ret;
> + size_t sz;
>
> channels = indio_dev->channels;
> if (channels) {
> @@ -1597,8 +1699,21 @@ int iio_buffer_alloc_sysfs_and_mask(struct iio_dev *indio_dev)
> if (ret)
> goto error_remove_buffer_dir_link;
>
> + sz = sizeof(*(iio_dev_opaque->buffer_ioctl_handler));
> + iio_dev_opaque->buffer_ioctl_handler = kzalloc(sz, GFP_KERNEL);
> + if (!iio_dev_opaque->buffer_ioctl_handler) {
> + ret = -ENOMEM;
> + goto error_remove_scan_el_dir;
> + }
> +
> + iio_dev_opaque->buffer_ioctl_handler->ioctl = iio_device_buffer_ioctl;
> + iio_device_ioctl_handler_register(indio_dev,
> + iio_dev_opaque->buffer_ioctl_handler);
> +
> return 0;
>
> +error_remove_scan_el_dir:
> + sysfs_remove_link(&indio_dev->dev.kobj, "scan_elements");
> error_remove_buffer_dir_link:
> sysfs_remove_link(&indio_dev->dev.kobj, "buffer");
> cnt = iio_dev_opaque->attached_buffers_cnt - 1;
> @@ -1627,6 +1742,10 @@ void iio_buffer_free_sysfs_and_mask(struct iio_dev *indio_dev)
> if (!buffer)
> return;
>
> + iio_device_ioctl_handler_unregister(iio_dev_opaque->buffer_ioctl_handler);
> + kfree(iio_dev_opaque->buffer_ioctl_handler);
> + iio_dev_opaque->buffer_ioctl_handler = NULL;
> +
> sysfs_remove_link(&indio_dev->dev.kobj, "scan_elements");
> sysfs_remove_link(&indio_dev->dev.kobj, "buffer");
>
> diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c
> index 0d1880837776..898992fd33c3 100644
> --- a/drivers/iio/industrialio-core.c
> +++ b/drivers/iio/industrialio-core.c
> @@ -1683,6 +1683,9 @@ static int iio_chrdev_open(struct inode *inode, struct file *filp)
> ib->indio_dev = indio_dev;
> ib->buffer = indio_dev->buffer;
>
> + if (indio_dev->buffer)
> + test_and_set_bit(IIO_BUSY_BIT_POS, &indio_dev->buffer->flags);
> +
> filp->private_data = ib;
>
> return 0;
> @@ -1700,6 +1703,11 @@ static int iio_chrdev_release(struct inode *inode, struct file *filp)
> struct iio_dev_buffer_pair *ib = filp->private_data;
> struct iio_dev *indio_dev = container_of(inode->i_cdev,
> struct iio_dev, chrdev);
> + struct iio_buffer *buffer = ib->buffer;
> +
> + if (buffer)
> + clear_bit(IIO_BUSY_BIT_POS, &buffer->flags);
> +
> clear_bit(IIO_BUSY_BIT_POS, &indio_dev->flags);
> iio_device_put(indio_dev);
> kfree(ib);
> diff --git a/include/linux/iio/buffer_impl.h b/include/linux/iio/buffer_impl.h
> index e25d26a7f601..78da590b5607 100644
> --- a/include/linux/iio/buffer_impl.h
> +++ b/include/linux/iio/buffer_impl.h
> @@ -6,6 +6,8 @@
>
> #ifdef CONFIG_IIO_BUFFER
>
> +#include <uapi/linux/iio/buffer.h>
> +
> struct iio_dev;
> struct iio_buffer;
>
> @@ -75,6 +77,9 @@ struct iio_buffer {
> /** @length: Number of datums in buffer. */
> unsigned int length;
>
> + /** @flags: File ops flags including busy flag. */
> + unsigned long flags;
> +
> /** @bytes_per_datum: Size of individual datum including timestamp. */
> size_t bytes_per_datum;
>
> diff --git a/include/linux/iio/iio-opaque.h b/include/linux/iio/iio-opaque.h
> index 1db0ea09520e..d0429b13afa8 100644
> --- a/include/linux/iio/iio-opaque.h
> +++ b/include/linux/iio/iio-opaque.h
> @@ -9,6 +9,7 @@
> * @event_interface: event chrdevs associated with interrupt lines
> * @attached_buffers: array of buffers statically attached by the driver
> * @attached_buffers_cnt: number of buffers in the array of statically attached buffers
> + * @buffer_ioctl_handler: ioctl() handler for this IIO device's buffer interface
> * @buffer_list: list of all buffers currently attached
> * @channel_attr_list: keep track of automatically created channel
> * attributes
> @@ -24,6 +25,7 @@ struct iio_dev_opaque {
> struct iio_event_interface *event_interface;
> struct iio_buffer **attached_buffers;
> unsigned int attached_buffers_cnt;
> + struct iio_ioctl_handler *buffer_ioctl_handler;
> struct list_head buffer_list;
> struct list_head channel_attr_list;
> struct attribute_group chan_attr_group;
> diff --git a/include/uapi/linux/iio/buffer.h b/include/uapi/linux/iio/buffer.h
> new file mode 100644
> index 000000000000..5455f7ff143d
> --- /dev/null
> +++ b/include/uapi/linux/iio/buffer.h
> @@ -0,0 +1,10 @@
> +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
> +/* industrial I/O buffer definitions needed both in and out of kernel
> + */
> +
> +#ifndef _UAPI_IIO_BUFFER_H_
> +#define _UAPI_IIO_BUFFER_H_
> +
> +#define IIO_BUFFER_GET_FD_IOCTL _IOWR('i', 0xb0, int)
> +
> +#endif /* _UAPI_IIO_BUFFER_H_ */

Next message: Marc Zyngier: "Re: [PATCH v4 18/21] arm64: Move "nokaslr" over to the early cpufeature infrastructure"
Previous message: pr-tracker-bot: "Re: [GIT PULL] misc fixes for v5.11-rc5"
Next in thread: Alexandru Ardelean: "Re: [PATCH v2 12/12][RESEND] iio: buffer: add ioctl() to support opening extra buffers for IIO device"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]