Re: [PATCH v2 4/4] phy: phy-hi3670-usb3: move driver from staging into phy

[Mauro Carvalho Chehab]

Em Fri, 22 Jan 2021 08:51:37 -0600
Rob Herring <robh@xxxxxxxxxx> escreveu:

> On Tue, Jan 19, 2021 at 4:26 AM Mauro Carvalho Chehab
> <mchehab+huawei@xxxxxxxxxx> wrote:
> >
> > Em Thu, 14 Jan 2021 19:47:31 -0600
> > Rob Herring <robh@xxxxxxxxxx> escreveu:
> >  
> > > On Thu, Jan 14, 2021 at 06:35:44PM +0100, Mauro Carvalho Chehab wrote:  
> > > > The phy USB3 driver for Hisilicon 970 (hi3670) is ready
> > > > for mainstream. Mode it from staging into the main driver's
> > > > phy/ directory.
> > > >
> > > > Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
> > > > ---
> > > >  .../bindings/phy/phy-hi3670-usb3.yaml         |  72 ++
> > > >  MAINTAINERS                                   |   9 +-
> > > >  drivers/phy/hisilicon/Kconfig                 |  10 +
> > > >  drivers/phy/hisilicon/Makefile                |   1 +
> > > >  drivers/phy/hisilicon/phy-hi3670-usb3.c       | 668 ++++++++++++++++++
> > > >  drivers/staging/hikey9xx/Kconfig              |  11 -
> > > >  drivers/staging/hikey9xx/Makefile             |   2 -
> > > >  drivers/staging/hikey9xx/phy-hi3670-usb3.c    | 668 ------------------
> > > >  drivers/staging/hikey9xx/phy-hi3670-usb3.yaml |  72 --
> > > >  9 files changed, 759 insertions(+), 754 deletions(-)
> > > >  create mode 100644 Documentation/devicetree/bindings/phy/phy-hi3670-usb3.yaml
> > > >  create mode 100644 drivers/phy/hisilicon/phy-hi3670-usb3.c
> > > >  delete mode 100644 drivers/staging/hikey9xx/phy-hi3670-usb3.c
> > > >  delete mode 100644 drivers/staging/hikey9xx/phy-hi3670-usb3.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/phy/phy-hi3670-usb3.yaml b/Documentation/devicetree/bindings/phy/phy-hi3670-usb3.yaml
> > > > new file mode 100644
> > > > index 000000000000..125a5d6546ae
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/phy/phy-hi3670-usb3.yaml
> > > > @@ -0,0 +1,72 @@
> > > > +# SPDX-License-Identifier: GPL-2.0
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/phy/hisilicon,hi3670-usb3.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Hisilicon Kirin970 USB PHY
> > > > +
> > > > +maintainers:
> > > > +  - Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>  
> > >
> > > Blank line.  
> >
> > Ok.
> >  
> > >  
> > > > +description: |+
> > > > +  Bindings for USB3 PHY on HiSilicon Kirin 970.
> > > > +
> > > > +properties:
> > > > +  compatible:
> > > > +    const: hisilicon,hi3670-usb-phy
> > > > +
> > > > +  "#phy-cells":
> > > > +    const: 0
> > > > +
> > > > +  hisilicon,pericrg-syscon:
> > > > +    $ref: '/schemas/types.yaml#/definitions/phandle'
> > > > +    description: phandle of syscon used to control iso refclk.
> > > > +
> > > > +  hisilicon,pctrl-syscon:
> > > > +    $ref: '/schemas/types.yaml#/definitions/phandle'
> > > > +    description: phandle of syscon used to control usb tcxo.
> > > > +
> > > > +  hisilicon,sctrl-syscon:
> > > > +    $ref: '/schemas/types.yaml#/definitions/phandle'
> > > > +    description: phandle of syscon used to control phy deep sleep.
> > > > +
> > > > +  hisilicon,eye-diagram-param:
> > > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > > +    description: Eye diagram for phy.
> > > > +
> > > > +  hisilicon,tx-vboost-lvl:
> > > > +    $ref: /schemas/types.yaml#/definitions/uint32
> > > > +    description: TX level vboost for phy.
> > > > +
> > > > +required:
> > > > +  - compatible
> > > > +  - hisilicon,pericrg-syscon
> > > > +  - hisilicon,pctrl-syscon
> > > > +  - hisilicon,sctrl-syscon
> > > > +  - hisilicon,eye-diagram-param
> > > > +  - hisilicon,tx-vboost-lvl
> > > > +  - "#phy-cells"
> > > > +
> > > > +additionalProperties: false
> > > > +
> > > > +examples:
> > > > +  - |
> > > > +    bus {
> > > > +      #address-cells = <2>;
> > > > +      #size-cells = <2>;
> > > > +
> > > > +      usb3_otg_bc: usb3_otg_bc@ff200000 {
> > > > +        compatible = "syscon", "simple-mfd";
> > > > +        reg = <0x0 0xff200000 0x0 0x1000>;
> > > > +
> > > > +        usb_phy {  
> > >
> > > Is there a contiguous register region for this sub-block? If so, add
> > > 'reg' even though Linux doesn't need it currently.  
> >
> > No. The driver uses 4 syscon regions in order to access the needed
> > registers:  
> 
> I meant just for the parent device node. I assume these are the 'main'
> registers? If not, then maybe it should be a child of one of the other
> syscons.
> 
> 'reg' would just be for documentation ATM. However, if the subblock
> was reused on another chip, but at a different offset then reg would
> become useful. You could handle that with a fixed offset when 'reg' is
> missing, but adding it later would be too late.

Hmm... You meaning something like this:

	examples:
	  - |
	    bus {
	      #address-cells = <2>;
	      #size-cells = <2>;
	      reg = <0>;

right?

If so, I don't see any problem on doing that, but that fictional
"bus" was added there just to be able to set #address-cells and
#size-cells, in order to avoid warnings when checking the DT
validity, as recommended by a past review from your side.

The actual DT for USB is (from hi3670.dtsi):

/ {
	compatible = "hisilicon,hi3670";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	soc {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		crg_ctrl: crg_ctrl@fff35000 {
			compatible = "hisilicon,hi3670-crgctrl", "syscon";
			reg = <0x0 0xfff35000 0x0 0x1000>;
			#clock-cells = <1>;
		};

		...

		usb3_otg_bc: usb3_otg_bc@ff200000 {
			compatible = "syscon", "simple-mfd";
			reg = <0x0 0xff200000 0x0 0x1000>;

			usb_phy: usbphy {
				compatible = "hisilicon,hi3670-usb-phy";
				#phy-cells = <0>;
				hisilicon,pericrg-syscon = <&crg_ctrl>;
				hisilicon,pctrl-syscon = <&pctrl>;
				hisilicon,sctrl-syscon = <&sctrl>;
				hisilicon,eye-diagram-param = <0xFDFEE4>;
				hisilicon,tx-vboost-lvl = <0x5>;

				phy-supply = <&ldo17>;
			};
		};
		...
	};
};


Thanks,
Mauro