Re: [PATCH] USB: serial: cp210x: Fix error 32 when hardware flow control is enabled.

[gregkh@xxxxxxxxxxxxxxxxxxx]

On Tue, Jan 19, 2021 at 09:43:13AM +0000, Pho Tran wrote:
> Fix error 32 returned by CP210X_SET_MHS when hardware flow control is enabled.
> 
> The root cause of error 32 is that user application (CoolTerm, linux-serial-test)
> opened cp210x device with hardware flow control then attempt to control RTS/DTR pins.
> In hardware flow control, RTS/DTR pins will be controlled by hardware only,
> any attempt to control those pin will cause error 32 from the device.
> This fix will block MHS command(command to control RTS/DTR pins) to the device
> if hardware flow control is being used.
> 
> Signed-off-by: Pho Tran <pho.tran@xxxxxxxxxx>
> ---
>  drivers/usb/serial/cp210x.c | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
> index fbb10dfc56e3..1835ccf2aa2f 100644
> --- a/drivers/usb/serial/cp210x.c
> +++ b/drivers/usb/serial/cp210x.c
> @@ -1211,6 +1211,11 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
>  		unsigned int set, unsigned int clear)
>  {
>  	u16 control = 0;
> +	struct cp210x_flow_ctl flow_ctl;
> +	u32 ctl_hs = 0;
> +	u32 flow_repl = 0;
> +	bool auto_dtr = false;
> +	bool auto_rts = false;
>  
>  	if (set & TIOCM_RTS) {
>  		control |= CONTROL_RTS;
> @@ -1230,6 +1235,25 @@ static int cp210x_tiocmset_port(struct usb_serial_port *port,
>  	}
>  
>  	dev_dbg(&port->dev, "%s - control = 0x%.4x\n", __func__, control);
> +	//Don't send MHS command if device in hardware flowcontrol mode

Please put a blank line before this comment.

And a ' ' after "//".

> +	cp210x_read_reg_block(port, CP210X_GET_FLOW, &flow_ctl, sizeof(flow_ctl));

No error checking?

> +	ctl_hs = le32_to_cpu(flow_ctl.ulControlHandshake);
> +	flow_repl = le32_to_cpu(flow_ctl.ulFlowReplace);
> +
> +	if (CP210X_SERIAL_DTR_SHIFT(CP210X_SERIAL_DTR_FLOW_CTL) == (ctl_hs & CP210X_SERIAL_DTR_MASK))
> +		auto_dtr = true;
> +	else
> +		auto_dtr = false;
> +
> +	if (CP210X_SERIAL_RTS_SHIFT(CP210X_SERIAL_RTS_FLOW_CTL) == (flow_repl & CP210X_SERIAL_RTS_MASK))
> +		auto_rts = true;
> +	else
> +		auto_rts = false;
> +
> +	if (auto_dtr || auto_rts) {
> +		dev_dbg(&port->dev, "Don't set MHS when while device in flow control mode\n");
> +		return 0;

Shouldn't this be a real error to send back to userspace, so that they
know the change they asked for failed?

thanks,

greg k-h