[PATCH v3 14/19] scsi: aic94xx: Switch back to original libsas event notifiers

From: Ahmed S. Darwish
Date: Mon Jan 18 2021 - 16:16:27 EST


libsas event notifiers required an extension where gfp_t flags must be
explicitly passed. For bisectability, a temporary _gfp() variant of such
functions were added. All call sites then got converted use the _gfp()
variants and explicitly pass GFP context. Having no callers left, the
original libsas notifiers were then modified to accept gfp_t flags by
default.

Switch back to the original libas API, while still passing GFP context.
The libsas _gfp() variants will be removed afterwards.

Signed-off-by: Ahmed S. Darwish <a.darwish@xxxxxxxxxxxxx>
Reviewed-by: John Garry <john.garry@xxxxxxxxxx>
---
drivers/scsi/aic94xx/aic94xx_scb.c | 29 +++++++++++++----------------
1 file changed, 13 insertions(+), 16 deletions(-)

diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
index 76a4c21144d8..68214a58b160 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -80,8 +80,8 @@ static void asd_phy_event_tasklet(struct asd_ascb *ascb,
ASD_DPRINTK("phy%d: device unplugged\n", phy_id);
asd_turn_led(asd_ha, phy_id, 0);
sas_phy_disconnected(&phy->sas_phy);
- sas_notify_phy_event_gfp(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL,
- GFP_ATOMIC);
+ sas_notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL,
+ GFP_ATOMIC);
break;
case CURRENT_OOB_DONE:
/* hot plugged device */
@@ -89,14 +89,13 @@ static void asd_phy_event_tasklet(struct asd_ascb *ascb,
get_lrate_mode(phy, oob_mode);
ASD_DPRINTK("phy%d device plugged: lrate:0x%x, proto:0x%x\n",
phy_id, phy->sas_phy.linkrate, phy->sas_phy.iproto);
- sas_notify_phy_event_gfp(&phy->sas_phy, PHYE_OOB_DONE,
- GFP_ATOMIC);
+ sas_notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE, GFP_ATOMIC);
break;
case CURRENT_SPINUP_HOLD:
/* hot plug SATA, no COMWAKE sent */
asd_turn_led(asd_ha, phy_id, 1);
- sas_notify_phy_event_gfp(&phy->sas_phy, PHYE_SPINUP_HOLD,
- GFP_ATOMIC);
+ sas_notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD,
+ GFP_ATOMIC);
break;
case CURRENT_GTO_TIMEOUT:
case CURRENT_OOB_ERROR:
@@ -104,8 +103,7 @@ static void asd_phy_event_tasklet(struct asd_ascb *ascb,
dl->status_block[1]);
asd_turn_led(asd_ha, phy_id, 0);
sas_phy_disconnected(&phy->sas_phy);
- sas_notify_phy_event_gfp(&phy->sas_phy, PHYE_OOB_ERROR,
- GFP_ATOMIC);
+ sas_notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR, GFP_ATOMIC);
break;
}
}
@@ -236,7 +234,7 @@ static void asd_bytes_dmaed_tasklet(struct asd_ascb *ascb,
spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
asd_dump_frame_rcvd(phy, dl);
asd_form_port(ascb->ha, phy);
- sas_notify_port_event_gfp(&phy->sas_phy, PORTE_BYTES_DMAED, GFP_ATOMIC);
+ sas_notify_port_event(&phy->sas_phy, PORTE_BYTES_DMAED, GFP_ATOMIC);
}

static void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
@@ -272,7 +270,7 @@ static void asd_link_reset_err_tasklet(struct asd_ascb *ascb,
asd_turn_led(asd_ha, phy_id, 0);
sas_phy_disconnected(sas_phy);
asd_deform_port(asd_ha, phy);
- sas_notify_port_event_gfp(sas_phy, PORTE_LINK_RESET_ERR, GFP_ATOMIC);
+ sas_notify_port_event(sas_phy, PORTE_LINK_RESET_ERR, GFP_ATOMIC);

if (retries_left == 0) {
int num = 1;
@@ -317,8 +315,8 @@ static void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb,
spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
sas_phy->sas_prim = ffs(cont);
spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
- sas_notify_port_event_gfp(sas_phy, PORTE_BROADCAST_RCVD,
- GFP_ATOMIC);
+ sas_notify_port_event(sas_phy, PORTE_BROADCAST_RCVD,
+ GFP_ATOMIC);
break;

case LmUNKNOWNP:
@@ -339,8 +337,8 @@ static void asd_primitive_rcvd_tasklet(struct asd_ascb *ascb,
/* The sequencer disables all phys on that port.
* We have to re-enable the phys ourselves. */
asd_deform_port(asd_ha, phy);
- sas_notify_port_event_gfp(sas_phy, PORTE_HARD_RESET,
- GFP_ATOMIC);
+ sas_notify_port_event(sas_phy, PORTE_HARD_RESET,
+ GFP_ATOMIC);
break;

default:
@@ -571,8 +569,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
/* the device is gone */
sas_phy_disconnected(sas_phy);
asd_deform_port(asd_ha, phy);
- sas_notify_port_event_gfp(sas_phy, PORTE_TIMER_EVENT,
- GFP_ATOMIC);
+ sas_notify_port_event(sas_phy, PORTE_TIMER_EVENT, GFP_ATOMIC);
break;
default:
ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __func__,
--
2.30.0