[PATCH 09/11] arm64: dts: qcom: msm8994: Fix BLSP2_UART2 node

[Konrad Dybcio]

Fix up the node to make the peripheral functional.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8994.dtsi | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index f7e6423db8d4..3dfa74085f10 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -493,7 +493,7 @@ blsp_i2c6: i2c@f9928000 {
 		blsp2_uart2: serial@f995e000 {
 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
 			reg = <0xf995e000 0x1000>;
-			interrupts = <GIC_SPI 146 IRQ_TYPE_EDGE_FALLING>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
 			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
 					<&gcc GCC_BLSP2_AHB_CLK>;
@@ -588,16 +588,18 @@ blsp1_uart2_sleep: blsp1-uart2-sleep {
 
 			blsp2_uart2_default: blsp2-uart2-default {
 				function = "blsp_uart8";
-				pins = "gpio45", "gpio46";
-				drive-strength = <2>;
+				pins = "gpio45", "gpio46",
+						"gpio47", "gpio48";
+				drive-strength = <16>;
 				bias-disable;
 			};
 
 			blsp2_uart2_sleep: blsp2-uart2-sleep {
 				function = "gpio";
-				pins = "gpio45", "gpio46";
+				pins = "gpio45", "gpio46",
+						"gpio47", "gpio48";
 				drive-strength = <2>;
-				bias-pull-down;
+				bias-disable;
 			};
 
 			i2c1_default: i2c1-default {
-- 
2.29.2