[PATCH v4 05/15] media: sun6i-csi: Only configure the interface data width for parallel

From: Paul Kocialkowski
Date: Thu Dec 31 2020 - 09:31:00 EST


Bits related to the interface data width are only applicable to the
parallel interface and are irrelevant when the CSI controller is taking
input from the MIPI CSI-2 controller.

In prevision of adding support for this case, set these bits
conditionally so there is no ambiguity. The conditional block is
moved around before the interlaced conditional block for nicer code
symmetry (conditional blocks first) while at it.

Co-developed-by: Kévin L'hôpital <kevin.lhopital@xxxxxxxxxxx>
Signed-off-by: Kévin L'hôpital <kevin.lhopital@xxxxxxxxxxx>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
---
.../platform/sunxi/sun6i-csi/sun6i_csi.c | 42 +++++++++++--------
1 file changed, 25 insertions(+), 17 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
index 531a4cccd14a..f1150de94e98 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
@@ -378,8 +378,13 @@ static void sun6i_csi_setup_bus(struct sun6i_csi_dev *sdev)
unsigned char bus_width;
u32 flags;
u32 cfg;
+ bool input_parallel = false;
bool input_interlaced = false;

+ if (endpoint->bus_type == V4L2_MBUS_PARALLEL ||
+ endpoint->bus_type == V4L2_MBUS_BT656)
+ input_parallel = true;
+
if (csi->config.field == V4L2_FIELD_INTERLACED
|| csi->config.field == V4L2_FIELD_INTERLACED_TB
|| csi->config.field == V4L2_FIELD_INTERLACED_BT)
@@ -395,6 +400,26 @@ static void sun6i_csi_setup_bus(struct sun6i_csi_dev *sdev)
CSI_IF_CFG_HREF_POL_MASK | CSI_IF_CFG_FIELD_MASK |
CSI_IF_CFG_SRC_TYPE_MASK);

+ if (input_parallel) {
+ switch (bus_width) {
+ case 8:
+ cfg |= CSI_IF_CFG_IF_DATA_WIDTH_8BIT;
+ break;
+ case 10:
+ cfg |= CSI_IF_CFG_IF_DATA_WIDTH_10BIT;
+ break;
+ case 12:
+ cfg |= CSI_IF_CFG_IF_DATA_WIDTH_12BIT;
+ break;
+ case 16: /* No need to configure DATA_WIDTH for 16bit */
+ break;
+ default:
+ dev_warn(sdev->dev, "Unsupported bus width: %u\n",
+ bus_width);
+ break;
+ }
+ }
+
if (input_interlaced)
cfg |= CSI_IF_CFG_SRC_TYPE_INTERLACED;
else
@@ -440,23 +465,6 @@ static void sun6i_csi_setup_bus(struct sun6i_csi_dev *sdev)
break;
}

- switch (bus_width) {
- case 8:
- cfg |= CSI_IF_CFG_IF_DATA_WIDTH_8BIT;
- break;
- case 10:
- cfg |= CSI_IF_CFG_IF_DATA_WIDTH_10BIT;
- break;
- case 12:
- cfg |= CSI_IF_CFG_IF_DATA_WIDTH_12BIT;
- break;
- case 16: /* No need to configure DATA_WIDTH for 16bit */
- break;
- default:
- dev_warn(sdev->dev, "Unsupported bus width: %u\n", bus_width);
- break;
- }
-
regmap_write(sdev->regmap, CSI_IF_CFG_REG, cfg);
}

--
2.29.2