[PATCH 5.10 194/717] ARM: dts: at91: sama5d3_xplained: add pincontrol for USB Host

From: Greg Kroah-Hartman
Date: Mon Dec 28 2020 - 10:09:04 EST


From: Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>

[ Upstream commit e1062fa7292f1e3744db0a487c4ac0109e09b03d ]

The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.

Fixes: b7c2b61570798 ("ARM: at91: add Atmel's SAMA5D3 Xplained board")
Signed-off-by: Cristian Birsan <cristian.birsan@xxxxxxxxxxxxx>
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
Acked-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20201118120019.1257580-4-cristian.birsan@xxxxxxxxxxxxx
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
arch/arm/boot/dts/at91-sama5d3_xplained.dts | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
index cf13632edd444..5179258f92470 100644
--- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts
@@ -242,6 +242,11 @@
atmel,pins =
<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */
};
+ pinctrl_usb_default: usb_default {
+ atmel,pins =
+ <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
};
};
};
@@ -259,6 +264,8 @@
&pioE 3 GPIO_ACTIVE_LOW
&pioE 4 GPIO_ACTIVE_LOW
>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
};

--
2.27.0