[PATCH 5.4 059/453] ARM: dts: exynos: fix USB 3.0 VBUS control and over-current pins on Exynos5410

From: Greg Kroah-Hartman
Date: Mon Dec 28 2020 - 08:40:32 EST


From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>

commit 3d992fd8f4e0f09c980726308d2f2725587b32d6 upstream.

The VBUS control (PWREN) and over-current pins of USB 3.0 DWC3
controllers are on Exynos5410 regular GPIOs. This is different than for
example on Exynos5422 where these are special ETC pins with proper reset
values (pulls, functions).

Therefore these pins should be configured to enable proper USB 3.0
peripheral and host modes. This also fixes over-current warning:

[ 6.024658] usb usb4-port1: over-current condition
[ 6.028271] usb usb3-port1: over-current condition

Fixes: cb0896562228 ("ARM: dts: exynos: Add USB to Exynos5410")
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20201015182044.480562-2-krzk@xxxxxxxxxx
Tested-by: Gabriel Ribba Esteva <gabriel.ribbae@xxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
arch/arm/boot/dts/exynos5410-pinctrl.dtsi | 28 ++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos5410.dtsi | 4 ++++
2 files changed, 32 insertions(+)

--- a/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5410-pinctrl.dtsi
@@ -560,6 +560,34 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ usb3_1_oc: usb3-1-oc {
+ samsung,pins = "gpk2-4", "gpk2-5";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ usb3_1_vbusctrl: usb3-1-vbusctrl {
+ samsung,pins = "gpk2-6", "gpk2-7";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ usb3_0_oc: usb3-0-oc {
+ samsung,pins = "gpk3-0", "gpk3-1";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+
+ usb3_0_vbusctrl: usb3-0-vbusctrl {
+ samsung,pins = "gpk3-2", "gpk3-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
};

&pinctrl_2 {
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -398,6 +398,8 @@
&usbdrd3_0 {
clocks = <&clock CLK_USBD300>;
clock-names = "usbdrd30";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_0_oc>, <&usb3_0_vbusctrl>;
};

&usbdrd_phy0 {
@@ -409,6 +411,8 @@
&usbdrd3_1 {
clocks = <&clock CLK_USBD301>;
clock-names = "usbdrd30";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_1_oc>, <&usb3_1_vbusctrl>;
};

&usbdrd_dwc3_1 {