[PATCH 09/14] extcon: arizona: Add arizona_set_extcon_state() helper

From: Hans de Goede
Date: Sun Dec 27 2020 - 16:14:34 EST


All the callers of extcon_set_state_sync() log an error on failure,
without doing any further error-handling (as there is nothing they
can do about the error).

Factor this out into a helper to remove some duplicate code.

Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/extcon/extcon-arizona.c | 47 ++++++++++++---------------------
1 file changed, 17 insertions(+), 30 deletions(-)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 145ca5cd40d5..d5b3231744f9 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -595,6 +595,16 @@ static int arizona_hpdet_do_id(struct arizona_extcon_info *info, int *reading,
return 0;
}

+static void arizona_set_extcon_state(struct arizona_extcon_info *info,
+ unsigned int id, bool state)
+{
+ int ret;
+
+ ret = extcon_set_state_sync(info->edev, id, state);
+ if (ret)
+ dev_err(info->arizona->dev, "Failed to set extcon state: %d\n", ret);
+}
+
static irqreturn_t arizona_hpdet_irq(int irq, void *data)
{
struct arizona_extcon_info *info = data;
@@ -648,11 +658,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
else
report = EXTCON_JACK_HEADPHONE;

- ret = extcon_set_state_sync(info->edev, report, true);
- if (ret != 0)
- dev_err(arizona->dev, "Failed to report HP/line: %d\n",
- ret);
-
+ arizona_set_extcon_state(info, report, true);
done:
/* Reset back to starting range */
regmap_update_bits(arizona->regmap,
@@ -727,9 +733,7 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
pm_runtime_put_autosuspend(info->dev);

/* Just report headphone */
- ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
- if (ret != 0)
- dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
+ arizona_set_extcon_state(info, EXTCON_JACK_HEADPHONE, true);

if (info->mic)
arizona_start_mic(info);
@@ -781,10 +785,7 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)

err:
/* Just report headphone */
- ret = extcon_set_state_sync(info->edev, EXTCON_JACK_HEADPHONE, true);
- if (ret != 0)
- dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
-
+ arizona_set_extcon_state(info, EXTCON_JACK_HEADPHONE, true);
info->hpdet_active = false;
}

@@ -904,11 +905,7 @@ static int arizona_micdet_reading(void *priv)

arizona_identify_headphone(info);

- ret = extcon_set_state_sync(info->edev,
- EXTCON_JACK_MICROPHONE, true);
- if (ret != 0)
- dev_err(arizona->dev, "Headset report failed: %d\n",
- ret);
+ arizona_set_extcon_state(info, EXTCON_JACK_MICROPHONE, true);

/* Don't need to regulate for button detection */
ret = regulator_allow_bypass(info->micvdd, true);
@@ -1175,12 +1172,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)

if (info->last_jackdet == present) {
dev_dbg(arizona->dev, "Detected jack\n");
- ret = extcon_set_state_sync(info->edev,
- EXTCON_MECHANICAL, true);
-
- if (ret != 0)
- dev_err(arizona->dev, "Mechanical report failed: %d\n",
- ret);
+ arizona_set_extcon_state(info, EXTCON_MECHANICAL, true);

info->detecting = true;
info->mic = false;
@@ -1216,13 +1208,8 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
info->micd_ranges[i].key, 0);
input_sync(info->input);

- for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) {
- ret = extcon_set_state_sync(info->edev,
- arizona_cable[i], false);
- if (ret != 0)
- dev_err(arizona->dev,
- "Removal report failed: %d\n", ret);
- }
+ for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++)
+ arizona_set_extcon_state(info, arizona_cable[i], false);

/*
* If the jack was removed during a headphone detection we
--
2.28.0