[PATCH v5 0/6] mmc: sdhci-of-aspeed: Expose phase delay tuning

[Andrew Jeffery]

Hello,

This series implements support for the MMC core clk-phase-* devicetree bindings
in the Aspeed SD/eMMC driver. The relevant register was exposed on the AST2600
and is present for both the SD/MMC controller and the dedicated eMMC
controller.

v5 fixes some build issues identified by the kernel test robot.

v4 can be found here:

https://lore.kernel.org/linux-mmc/20201207142556.2045481-1-andrew@xxxxxxxx/

The series has had light testing on an AST2600-based platform which requires
180deg of input and output clock phase correction at HS200, as well as some
synthetic testing under qemu and KUnit.

Please review!

Cheers,

Andrew

Andrew Jeffery (6):
  mmc: core: Add helper for parsing clock phase properties
  mmc: sdhci-of-aspeed: Expose clock phase controls
  mmc: sdhci-of-aspeed: Add AST2600 bus clock support
  mmc: sdhci-of-aspeed: Add KUnit tests for phase calculations
  MAINTAINERS: Add entry for the ASPEED SD/MMC driver
  ARM: dts: rainier: Add eMMC clock phase compensation

 MAINTAINERS                                  |   9 +
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts |   1 +
 drivers/mmc/core/host.c                      |  44 ++++
 drivers/mmc/host/Kconfig                     |  14 ++
 drivers/mmc/host/Makefile                    |   1 +
 drivers/mmc/host/sdhci-of-aspeed-test.c      | 100 ++++++++
 drivers/mmc/host/sdhci-of-aspeed.c           | 251 ++++++++++++++++++-
 include/linux/mmc/host.h                     |  17 ++
 8 files changed, 426 insertions(+), 11 deletions(-)
 create mode 100644 drivers/mmc/host/sdhci-of-aspeed-test.c

-- 
2.27.0