Re: [PATCH v2 2/4] backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight

[Rob Herring]

On Fri, Dec 04, 2020 at 12:06:33AM +0800, cy_huang wrote:
> From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> 
> Adds DT binding document for Richtek RT4831 backlight.
> 
> Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> ---
>  .../leds/backlight/richtek,rt4831-backlight.yaml   | 86 ++++++++++++++++++++++
>  1 file changed, 86 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
> new file mode 100644
> index 00000000..df1439a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
> @@ -0,0 +1,86 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/backlight/richtek,rt4831-backlight.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Richtek RT4831 Backlight
> +
> +maintainers:
> +  - ChiYuan Huang <cy_huang@xxxxxxxxxxx>
> +
> +description: |
> +  RT4831 is a mutifunctional device that can provide power to the LCD display
> +  and LCD backlight.
> +
> +  For the LCD backlight, it can provide four channel WLED driving capability.
> +  Each channel driving current is up to 30mA
> +
> +  Datasheet is available at
> +  https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf
> +
> +properties:
> +  compatible:
> +    const: richtek,rt4831-backlight
> +
> +  default-brightness:
> +    description: |
> +      The default brightness that applied to the system on start-up.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 0
> +    maximum: 2048
> +
> +  max-brightness:
> +    description: |
> +      The max brightness for the H/W limit
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    minimum: 0
> +    maximum: 2048
> +
> +  richtek,pwm-enable:
> +    description: |
> +      Specify the backlight dimming following by PWM duty or by SW control.
> +    type: boolean
> +
> +  richtek,bled-ovp-sel:
> +    description: |
> +      Backlight OVP level selection, currently support 17V/21V/25V/29V.
> +    $ref: /schemas/types.yaml#/definitions/uint8
> +    default: 1
> +    minimum: 0
> +    maximum: 3
> +
> +  richtek,channel-use:
> +    description: |
> +      Backlight LED channel to be used.
> +      BIT 0/1/2/3 is used to indicate led channel 1/2/3/4 enable or disable.
> +    $ref: /schemas/types.yaml#/definitions/uint8
> +    minimum: 1
> +    maximum: 15
> +
> +required:
> +  - compatible
> +  - richtek,channel-use
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/leds/rt4831-backlight.h>
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      rt4831@11 {
> +        compatible = "richtek,rt4831";
> +        reg = <0x11>;
> +
> +        backlight {
> +          compatible = "richtek,rt4831-backlight";
> +          default-brightness = <1024>;
> +          max-brightness = <2048>;
> +          richtek,bled-ovp-sel = /bits/ 8 <RT4831_BLOVPLVL_21V>;
> +          richtek,channel-use = /bits/ 8 <RT4831_BLED_ALLCHEN>;
> +        };
> +      };

Just do 1 complete example in the mfd binding.

> +    };
> -- 
> 2.7.4
>