[PATCH v3 3/5] ARM: dts: sun8i: Cleanup the Pinecube AXP209 node

[Paul Kocialkowski]

This fixes a few things with the Pinecube AXP209 node:
- No compatible is required since it is using an AXP209 (not AXP203)
  according to the schematics and this is what the included axp209.dtsi
  already has;
- The interrupt-controller and #interrupt-cells properties are already
  described in the included axp209.dtsi;
- The interrupt comes through the NMI controller, not directly through
  the GIC.

Signed-off-by: Paul Kocialkowski <contact@xxxxxxxx>
---
 arch/arm/boot/dts/sun8i-s3-pinecube.dts | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts
index 4aa0ee897a0a..3c4bc4b0ca7f 100644
--- a/arch/arm/boot/dts/sun8i-s3-pinecube.dts
+++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts
@@ -88,13 +88,9 @@ &i2c0 {
 	status = "okay";
 
 	axp209: pmic@34 {
-		compatible = "x-powers,axp203",
-			     "x-powers,axp209";
 		reg = <0x34>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-controller;
-		#interrupt-cells = <1>;
+		interrupt-parent = <&nmi_intc>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
-- 
2.29.2