Re: [PATCH v2 00/18] Add CMU/RMU/DMA/MMC/I2C support for Actions Semi S500 SoCs

[Cristian Ciocaltea]

Hi Mani,

On Sat, Dec 05, 2020 at 11:41:15AM +0530, Manivannan Sadhasivam wrote:
> Hi Cristi,
> 
> On Fri, Nov 20, 2020 at 01:55:54AM +0200, Cristian Ciocaltea wrote:
> > Hi,
> > 
> > This patchset brings a series of improvements for the Actions Semi S500
> > SoCs family, by adding support for Clock & Reset Management Units, DMA,
> > MMC, I2C & SIRQ controllers.
> > 
> > Please note the patches consist mostly of DTS and bindings/compatibles
> > changes, since all the work they depend on has been already merged,
> > i.e. clock fixes/additions, pinctrl driver, sirq driver.
> > 
> > For the moment, I have only enabled the features I could test on
> > RoseapplePi SBC.
> > 
> 
> I was hoping to apply this series for v5.11 but we ran out of time. So expect
> this series to be in v5.12.

No problem, thanks a lot for taking care of this!

Kind regards,
Cristi

> Thanks,
> Mani
> 
> > Thanks,
> > Cristi
> > 
> > Changes in v2:
> > - Added new bindings/compatibles for S500 DMA, MMC & I2C controllers
> > - Added support for the SIRQ controller
> > - Added new entries in MAINTAINERS
> > - Updated naming of some patches in v1
> > 
> > Cristian Ciocaltea (18):
> >   arm: dts: owl-s500: Add Clock Management Unit
> >   arm: dts: owl-s500: Set CMU clocks for UARTs
> >   arm: dts: owl-s500: Add Reset controller
> >   dt-bindings: dma: owl: Add compatible string for Actions Semi S500 SoC
> >   dmaengine: owl: Add compatible for the Actions Semi S500 DMA
> >     controller
> >   arm: dts: owl-s500: Add DMA controller
> >   arm: dts: owl-s500: Add pinctrl & GPIO support
> >   dt-bindings: mmc: owl: Add compatible string for Actions Semi S500 SoC
> >   arm: dts: owl-s500: Add MMC support
> >   dt-bindings: i2c: owl: Convert Actions Semi Owl binding to a schema
> >   MAINTAINERS: Update entry for Actions Semi Owl I2C binding
> >   i2c: owl: Add compatible for the Actions Semi S500 I2C controller
> >   arm: dts: owl-s500: Add I2C support
> >   arm: dts: owl-s500: Add SIRQ controller
> >   arm: dts: owl-s500-roseapplepi: Use UART clock from CMU
> >   arm: dts: owl-s500-roseapplepi: Add uSD support
> >   arm: dts: owl-s500-roseapplepi: Add I2C pinctrl configuration
> >   MAINTAINERS: Add linux-actions ML for Actions Semi Arch
> > 
> >  .../devicetree/bindings/dma/owl-dma.yaml      |   5 +-
> >  .../devicetree/bindings/i2c/i2c-owl.txt       |  29 ----
> >  .../devicetree/bindings/i2c/i2c-owl.yaml      |  62 ++++++++
> >  .../devicetree/bindings/mmc/owl-mmc.yaml      |   4 +-
> >  MAINTAINERS                                   |   3 +-
> >  arch/arm/boot/dts/owl-s500-roseapplepi.dts    |  97 +++++++++++-
> >  arch/arm/boot/dts/owl-s500.dtsi               | 140 ++++++++++++++++++
> >  drivers/dma/owl-dma.c                         |   1 +
> >  drivers/i2c/busses/i2c-owl.c                  |   1 +
> >  9 files changed, 304 insertions(+), 38 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-owl.txt
> >  create mode 100644 Documentation/devicetree/bindings/i2c/i2c-owl.yaml
> > 
> > -- 
> > 2.29.2
> >