Re: [PATCH 2/2] arm64: dts: allwinner: a100: Add CPU Operating Performance Points table

[Frank Lee]

HI shuosheng,

On Fri, Dec 4, 2020 at 3:11 PM Shuosheng Huang
<huangshuosheng@xxxxxxxxxxxxxxxxx> wrote:
>
> Add an Operating Performance Points table for the CPU cores to
> enable Dynamic Voltage & Frequency Scaling on the A100.
>
> Signed-off-by: Shuosheng Huang <huangshuosheng@xxxxxxxxxxxxxxxxx>
> ---
>  .../allwinner/sun50i-a100-allwinner-perf1.dts |  5 ++
>  .../dts/allwinner/sun50i-a100-cpu-opp.dtsi    | 90 +++++++++++++++++++
>  .../arm64/boot/dts/allwinner/sun50i-a100.dtsi |  8 ++
>  3 files changed, 103 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
> index d34c2bb1079f..7c579923f973 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts
> @@ -6,6 +6,7 @@
>  /dts-v1/;
>
>  #include "sun50i-a100.dtsi"
> +#include "sun50i-a100-cpu-opp.dtsi"
>
>  /{
>         model = "Allwinner A100 Perf1";
> @@ -20,6 +21,10 @@ chosen {
>         };
>  };
>
> +&cpu0 {
> +       cpu-supply = <&reg_dcdc2>;
> +};
> +
>  &pio {
>         vcc-pb-supply = <&reg_dcdc1>;
>         vcc-pc-supply = <&reg_eldo1>;
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
> new file mode 100644
> index 000000000000..bc8ceaa38392
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-cpu-opp.dtsi
> @@ -0,0 +1,90 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (c) 2020 Yangtao Li <frank@xxxxxxxxxxxxxxxxx>
> +// Copyright (c) 2020 ShuoSheng Huang <huangshuosheng@xxxxxxxxxxxxxxxxx>
> +
> +/ {
> +       cpu_opp_table: cpu-opp-table {
> +               compatible = "allwinner,sun50i-h6-operating-points";
> +               nvmem-cells = <&cpu_speed_grade>;
> +               opp-shared;
> +
> +               opp@408000000 {
> +                       clock-latency-ns = <244144>; /* 8 32k periods */
> +                       opp-hz = /bits/ 64 <408000000>;
> +
> +                       opp-microvolt-speed0 = <900000 900000 1200000>;
> +                       opp-microvolt-speed0 = <900000 900000 1200000>;
> +                       opp-microvolt-speed0 = <900000 900000 1200000>;
> +               };

This should be opp-microvolt-speed0, opp-microvolt-speed1 and
opp-microvolt-speed2.
You may have problems with the replacement when forming the patch.
The following also needs to be modified.

Yangtao