Re: [PATCH 5/5] clk: qcom: gcc: Add clock driver for SM8350

[Taniya Das]

Hi Vinod,

On 12/4/2020 10:05 AM, Vinod Koul wrote:
> Hi Bjorn,
>
> On 03-12-20, 18:06, Bjorn Andersson wrote:
> > On Thu 03 Dec 01:02 CST 2020, Vinod Koul wrote:
> > > diff --git a/drivers/clk/qcom/gcc-sm8350.c b/drivers/clk/qcom/gcc-sm8350.c
> > [..]
> > > +static int gcc_sm8350_probe(struct platform_device *pdev)
> > > +{
> > > +	struct regmap *regmap;
> > > +	int ret;
> > > +
> > > +	regmap = qcom_cc_map(pdev, &gcc_sm8350_desc);
> > > +	if (IS_ERR(regmap)) {
> > > +		dev_err(&pdev->dev, "Failed to map gcc registers\n");
> > > +		return PTR_ERR(regmap);
> > > +	}
> > > +
> > > +	ret = qcom_cc_register_rcg_dfs(regmap, gcc_dfs_clocks, ARRAY_SIZE(gcc_dfs_clocks));
> > > +	if (ret)
> > > +		return ret;
> > > +
> > > +	/* FORCE_MEM_CORE_ON for ufs phy ice core clocks */
> > > +	regmap_update_bits(regmap, gcc_ufs_phy_ice_core_clk.halt_reg, BIT(14), BIT(14));
> > > +
> > > +	/*
> > > +	 * Enable clocks required by the i2c-connected pm8008 regulators. Don't
> > > +	 * register them with the clock framework so that client requests are
> > > +	 * short-circuited before grabbing the enable/prepare locks. This
> > > +	 * prevents deadlocks between the clk/regulator frameworks.
> > > +	 *
> > > +	 *	gcc_qupv3_wrap_1_m_ahb_clk
> > > +	 *	gcc_qupv3_wrap_1_s_ahb_clk
> > > +	 *	gcc_qupv3_wrap1_s5_clk
> > > +	 */
> >
> > Isn't this a workaround inherited from the downstream control of
> > regulators from within the clock core? Does this still apply upstream?
>
> Let me check on this bit...
>
> Thanks

No it should not apply.

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.

--