[PATCH 04/12] arm64: dts: zynqmp: Enable and wire reset controller

[Michal Simek]

Enable reset controller for several IPs.

Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
---

 arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 29 ++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 68923fbd0e89..4fa820f78d76 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -187,6 +187,11 @@ zynqmp_pcap: pcap {
 			xlnx_aes: zynqmp-aes {
 				compatible = "xlnx,zynqmp-aes";
 			};
+
+			zynqmp_reset: reset-controller {
+				compatible = "xlnx,zynqmp-reset";
+				#reset-cells = <1>;
+			};
 		};
 	};
 
@@ -466,6 +471,8 @@ gem0: ethernet@ff0b0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			power-domains = <&zynqmp_firmware PD_ETH_0>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM0>;
+			reset-names = "gem0_rst";
 		};
 
 		gem1: ethernet@ff0c0000 {
@@ -478,6 +485,8 @@ gem1: ethernet@ff0c0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			power-domains = <&zynqmp_firmware PD_ETH_1>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>;
+			reset-names = "gem1_rst";
 		};
 
 		gem2: ethernet@ff0d0000 {
@@ -490,6 +499,8 @@ gem2: ethernet@ff0d0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			power-domains = <&zynqmp_firmware PD_ETH_2>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM2>;
+			reset-names = "gem2_rst";
 		};
 
 		gem3: ethernet@ff0e0000 {
@@ -502,6 +513,8 @@ gem3: ethernet@ff0e0000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			power-domains = <&zynqmp_firmware PD_ETH_3>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GEM3>;
+			reset-names = "gem3_rst";
 		};
 
 		gpio: gpio@ff0a0000 {
@@ -515,6 +528,8 @@ gpio: gpio@ff0a0000 {
 			#interrupt-cells = <2>;
 			reg = <0x0 0xff0a0000 0x0 0x1000>;
 			power-domains = <&zynqmp_firmware PD_GPIO>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_GPIO>;
+			reset-names = "gpio_rst";
 		};
 
 		i2c0: i2c@ff020000 {
@@ -526,6 +541,8 @@ i2c0: i2c@ff020000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			power-domains = <&zynqmp_firmware PD_I2C_0>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_I2C0>;
+			reset-names = "i2c0_rst";
 		};
 
 		i2c1: i2c@ff030000 {
@@ -537,6 +554,8 @@ i2c1: i2c@ff030000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			power-domains = <&zynqmp_firmware PD_I2C_1>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_I2C1>;
+			reset-names = "i2c1_rst";
 		};
 
 		pcie: pcie@fd0e0000 {
@@ -602,6 +621,8 @@ sata: ahci@fd0c0000 {
 			interrupt-parent = <&gic>;
 			interrupts = <0 133 4>;
 			power-domains = <&zynqmp_firmware PD_SATA>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_SATA>;
+			reset-names = "sata_rst";
 		};
 
 		sdhci0: mmc@ff160000 {
@@ -733,6 +754,10 @@ usb0: usb@fe200000 {
 			reg = <0x0 0xfe200000 0x0 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
 			power-domains = <&zynqmp_firmware PD_USB_0>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB0_APB>;
+			reset-names = "usb0_crst", "usb0_hibrst", "usb0_apbrst";
 		};
 
 		usb1: usb@fe300000 {
@@ -743,6 +768,10 @@ usb1: usb@fe300000 {
 			reg = <0x0 0xfe300000 0x0 0x40000>;
 			clock-names = "clk_xin", "clk_ahb";
 			power-domains = <&zynqmp_firmware PD_USB_1>;
+			resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
+				 <&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
+			reset-names = "usb1_crst", "usb1_hibrst", "usb1_apbrst";
 		};
 
 		watchdog0: watchdog@fd4d0000 {
-- 
2.29.2