Re: [PATCH v2 2/2] arm64: dts: qcom: db845c: Enable gpi_dma0 node

[Bjorn Andersson]

On Mon 30 Nov 22:25 CST 2020, Vinod Koul wrote:

> gpi_dma0 can be used for spi and i2c transfers on db845c, so enable it
> 
> Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index 7cc236575ee2..0653468f26ce 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -418,6 +418,10 @@ &gcc {
>  			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>;
>  };
>  
> +&gpi_dma0 {
> +	status = "okay";
> +};
> +

But you're only enabling the gpi, you don't have anything wired to it,
so why enable it?

I took a look downstream and they have all the i2c and spi nodes with
their dmas filled out - and the two gpis enabled at all times
(sdm845.dtsi). Can/should we do the same?

Regards,
Bjorn

>  &gpu {
>  	zap-shader {
>  		memory-region = <&gpu_mem>;
> -- 
> 2.26.2
>