Re: [PATCH v3 1/2] scsi: ufs: Refactor ufshcd_setup_clocks() to remove skip_ref_clk

[Asutosh Das (asd)]

On 11/25/2020 6:01 PM, Can Guo wrote:
> Remove the param skip_ref_clk from __ufshcd_setup_clocks(), but keep a flag
> in struct ufs_clk_info to tell whether a clock can be disabled or not while
> the link is active.
>
> Reviewed-by: Hongwu Su<hongwus@xxxxxxxxxxxxxx>
> Reviewed-by: Bean Huo <beanhuo@xxxxxxxxxx>
> Reviewed-by: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
> Signed-off-by: Can Guo <cang@xxxxxxxxxxxxxx>
> ---
>   drivers/scsi/ufs/ufshcd-pltfrm.c |  2 ++
>   drivers/scsi/ufs/ufshcd.c        | 29 +++++++++--------------------
>   drivers/scsi/ufs/ufshcd.h        |  3 +++
>   3 files changed, 14 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/scsi/ufs/ufshcd-pltfrm.c b/drivers/scsi/ufs/ufshcd-pltfrm.c
> index 3db0af6..873ef14 100644
> --- a/drivers/scsi/ufs/ufshcd-pltfrm.c
> +++ b/drivers/scsi/ufs/ufshcd-pltfrm.c
> @@ -92,6 +92,8 @@ static int ufshcd_parse_clock_info(struct ufs_hba *hba)
>   		clki->min_freq = clkfreq[i];
>   		clki->max_freq = clkfreq[i+1];
>   		clki->name = kstrdup(name, GFP_KERNEL);
> +		if (!strcmp(name, "ref_clk"))
> +			clki->keep_link_active = true;
>   		dev_dbg(dev, "%s: min %u max %u name %s\n", "freq-table-hz",
>   				clki->min_freq, clki->max_freq, clki->name);
>   		list_add_tail(&clki->list, &hba->clk_list_head);
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index a7857f6..44254c9 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -221,8 +221,6 @@ static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd);
>   static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag);
>   static void ufshcd_hba_exit(struct ufs_hba *hba);
>   static int ufshcd_probe_hba(struct ufs_hba *hba, bool async);
> -static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
> -				 bool skip_ref_clk);
>   static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on);
>   static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
>   static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba);
> @@ -1707,11 +1705,7 @@ static void ufshcd_gate_work(struct work_struct *work)
>   
>   	ufshcd_disable_irq(hba);
>   
> -	if (!ufshcd_is_link_active(hba))
> -		ufshcd_setup_clocks(hba, false);
> -	else
> -		/* If link is active, device ref_clk can't be switched off */
> -		__ufshcd_setup_clocks(hba, false, true);
> +	ufshcd_setup_clocks(hba, false);
>   
>   	/*
>   	 * In case you are here to cancel this work the gating state
> @@ -7990,8 +7984,7 @@ static int ufshcd_init_hba_vreg(struct ufs_hba *hba)
>   	return 0;
>   }
>   
> -static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
> -					bool skip_ref_clk)
> +static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
>   {
>   	int ret = 0;
>   	struct ufs_clk_info *clki;
> @@ -8009,7 +8002,12 @@ static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
>   
>   	list_for_each_entry(clki, head, list) {
>   		if (!IS_ERR_OR_NULL(clki->clk)) {
> -			if (skip_ref_clk && !strcmp(clki->name, "ref_clk"))
> +			/*
> +			 * Don't disable clocks which are needed
> +			 * to keep the link active.
> +			 */
> +			if (ufshcd_is_link_active(hba) &&
> +			    clki->keep_link_active)
>   				continue;
>   
>   			clk_state_changed = on ^ clki->enabled;
> @@ -8054,11 +8052,6 @@ static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
>   	return ret;
>   }
>   
> -static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
> -{
> -	return  __ufshcd_setup_clocks(hba, on, false);
> -}
> -
>   static int ufshcd_init_clocks(struct ufs_hba *hba)
>   {
>   	int ret = 0;
> @@ -8577,11 +8570,7 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
>   	 */
>   	ufshcd_disable_irq(hba);
>   
> -	if (!ufshcd_is_link_active(hba))
> -		ufshcd_setup_clocks(hba, false);
> -	else
> -		/* If link is active, device ref_clk can't be switched off */
> -		__ufshcd_setup_clocks(hba, false, true);
> +	ufshcd_setup_clocks(hba, false);
>   
>   	if (ufshcd_is_clkgating_allowed(hba)) {
>   		hba->clk_gating.state = CLKS_OFF;
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 66e5338..6f0f2d4 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -229,6 +229,8 @@ struct ufs_dev_cmd {
>    * @max_freq: maximum frequency supported by the clock
>    * @min_freq: min frequency that can be used for clock scaling
>    * @curr_freq: indicates the current frequency that it is set to
> + * @keep_link_active: indicates that the clk should not be disabled if
> +		      link is active
>    * @enabled: variable to check against multiple enable/disable
>    */
>   struct ufs_clk_info {
> @@ -238,6 +240,7 @@ struct ufs_clk_info {
>   	u32 max_freq;
>   	u32 min_freq;
>   	u32 curr_freq;
> +	bool keep_link_active;

Nitpick - How about 'always-on' instead of 'keep_link_active'?
>   	bool enabled;
>   };
>   


--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
Linux Foundation Collaborative Project