[PATCH v2] iosched: Add i10 I/O Scheduler

From: Rachit Agarwal
Date: Mon Nov 30 2020 - 15:20:36 EST


From: Rachit Agarwal <ragarwal@xxxxxxxxxxx>

Hi All,

I/O batching is beneficial for optimizing IOPS and throughput for various
applications. For instance, several kernel block drivers would benefit from
batching, including mmc [1] and tcp-based storage drivers like nvme-tcp [2,3].
While we have support for batching dispatch [4], we need an I/O scheduler to
efficiently enable batching. Such a scheduler is particularly interesting for
disaggregated (remote) storage, where the access latency of disaggregated remote
storage may be higher than local storage access; thus, batching can significantly
help in amortizing the remote access latency while increasing the throughput.

This patch introduces the i10 I/O scheduler, which performs batching per hctx in
terms of #requests, #bytes, and timeouts (at microseconds granularity). i10 starts
dispatching only when #requests or #bytes is larger than a threshold or when a timer
expires. After that, batching dispatch [3] would happen, allowing batching at device
drivers along with "bd->last" and ".commit_rqs".

The i10 I/O scheduler builds upon recent work on [6]. We have tested the i10 I/O
scheduler with nvme-tcp optimizaitons [2,3] and batching dispatch [4], varying number
of cores, varying read/write ratios, and varying request sizes, and with NVMe SSD and
RAM block device. For remote NVMe SSDs, the i10 I/O scheduler achieves ~60% improvements
in terms of IOPS per core over "noop" I/O scheduler, while trading off latency at lower loads.
These results are available at [5], and many additional results are presented in [6].

While other schedulers may also batch I/O (e.g., mq-deadline), the optimization target
in the i10 I/O scheduler is throughput maximization. Hence there is no latency target
nor a need for a global tracking context, so a new scheduler is needed rather than
to build this functionality to an existing scheduler.

We have default values for batching thresholds (e.g., 16 for #requests, 64KB for #bytes,
and 50us for timeout). These default values are based on sensitivity tests in [6].
For many workloads, especially those with low loads, the default values of i10 scheduler
may not provide the optimal operating point on the latency-throughput curve. To that end,
the scheduler adaptively sets the batch size depending on number of outstanding requests
and the triggering of timeouts, as measured in the block layer. Much work needs to be done
to design better adaptation algorithms, especially when the loads are neither too high
nor too low. This constitutes interesting future work. In addition, for our future work, we
plan to extend the scheduler to support isolation in multi-tenant
deployments (to simultaneously achieve low tail latency for latency-sensitive applications
and high throughput for throughput-bound applications).

References
[1] https://lore.kernel.org/linux-block/cover.1587888520.git.baolin.wang7@xxxxxxxxx/T/#mc48a8fb6069843827458f5fea722e1179d32af2a
[2] https://git.infradead.org/nvme.git/commit/122e5b9f3d370ae11e1502d14ff5c7ea9b144a76
[3] https://git.infradead.org/nvme.git/commit/86f0348ace1510d7ac25124b096fb88a6ab45270
[4] https://lore.kernel.org/linux-block/20200630102501.2238972-1-ming.lei@xxxxxxxxxx/
[5] https://github.com/i10-kernel/upstream-linux/blob/master/i10-evaluation.pdf
[6] https://www.usenix.org/conference/nsdi20/presentation/hwang

v2:
- rebase it onto the master branch
- add an adaptive mode for adjusting batch-size according to workloads
- update the link of the evaluation report [5]

Signed-off-by: Jaehyun Hwang <jaehyun.hwang@xxxxxxxxxxx>
Signed-off-by: Qizhe Cai <qc228@xxxxxxxxxxx>
Signed-off-by: Midhul Vuppalapati <mvv25@xxxxxxxxxxx>
Signed-off-by: Rachit Agarwal <ragarwal@xxxxxxxxxxx>
Signed-off-by: Sagi Grimberg <sagi@xxxxxxxxxxxxxxxxx>
---
Documentation/block/i10-iosched.rst | 79 ++++++
block/Kconfig.iosched | 8 +
block/Makefile | 1 +
block/i10-iosched.c | 471 ++++++++++++++++++++++++++++++++++++
4 files changed, 559 insertions(+)
create mode 100644 Documentation/block/i10-iosched.rst
create mode 100644 block/i10-iosched.c

diff --git a/Documentation/block/i10-iosched.rst b/Documentation/block/i10-iosched.rst
new file mode 100644
index 0000000..661b5d5
--- /dev/null
+++ b/Documentation/block/i10-iosched.rst
@@ -0,0 +1,79 @@
+==========================
+i10 I/O scheduler overview
+==========================
+
+I/O batching is beneficial for optimizing IOPS and throughput for various
+applications. For instance, several kernel block drivers would benefit from
+batching, including mmc [1] and tcp-based storage drivers like nvme-tcp [2,3].
+While we have support for batching dispatch [4], we need an I/O scheduler to
+efficiently enable batching. Such a scheduler is particularly interesting for
+disaggregated (remote) storage, where the access latency of disaggregated remote
+storage may be higher than local storage access; thus, batching can significantly
+help in amortizing the remote access latency while increasing the throughput.
+
+This patch introduces the i10 I/O scheduler, which performs batching per hctx in
+terms of #requests, #bytes, and timeouts (at microseconds granularity). i10 starts
+dispatching only when #requests or #bytes is larger than a threshold or when a timer
+expires. After that, batching dispatch [3] would happen, allowing batching at device
+drivers along with "bd->last" and ".commit_rqs".
+
+The i10 I/O scheduler builds upon recent work on [6]. We have tested the i10 I/O
+scheduler with nvme-tcp optimizaitons [2,3] and batching dispatch [4], varying number
+of cores, varying read/write ratios, and varying request sizes, and with NVMe SSD and
+RAM block device. For remote NVMe SSDs, the i10 I/O scheduler achieves ~60% improvements
+in terms of IOPS per core over "noop" I/O scheduler, while trading off latency at lower loads.
+These results are available at [5], and many additional results are presented in [6].
+
+While other schedulers may also batch I/O (e.g., mq-deadline), the optimization target
+in the i10 I/O scheduler is throughput maximization. Hence there is no latency target
+nor a need for a global tracking context, so a new scheduler is needed rather than
+to build this functionality to an existing scheduler.
+
+We have default values for batching thresholds (e.g., 16 for #requests, 64KB for #bytes,
+and 50us for timeout). These default values are based on sensitivity tests in [6].
+For many workloads, especially those with low loads, the default values of i10 scheduler
+may not provide the optimal operating point on the latency-throughput curve. To that end,
+the scheduler adaptively sets the batch size depending on number of outstanding requests
+and the triggering of timeouts, as measured in the block layer. Much work needs to be done
+to design better adaptation algorithms, especially when the loads are neither too high
+nor too low. This constitutes interesting future work. In addition, for our future work, we
+plan to extend the scheduler to support isolation in multi-tenant deployments
+(to simultaneously achieve low tail latency for latency-sensitive applications and high
+throughput for throughput-bound applications).
+
+References
+[1] https://lore.kernel.org/linux-block/cover.1587888520.git.baolin.wang7@xxxxxxxxx/T/#mc48a8fb6069843827458f5fea722e1179d32af2a
+[2] https://git.infradead.org/nvme.git/commit/122e5b9f3d370ae11e1502d14ff5c7ea9b144a76
+[3] https://git.infradead.org/nvme.git/commit/86f0348ace1510d7ac25124b096fb88a6ab45270
+[4] https://lore.kernel.org/linux-block/20200630102501.2238972-1-ming.lei@xxxxxxxxxx/
+[5] https://github.com/i10-kernel/upstream-linux/blob/master/i10-evaluation.pdf
+[6] https://www.usenix.org/conference/nsdi20/presentation/hwang
+
+==========================
+i10 I/O scheduler tunables
+==========================
+
+The three tunables for batching are the number of requests for
+reads/writes, the number of bytes for writes, and a timeout value.
+In the non-adaptive mode, i10 uses these values for batching requests.
+In the adaptive mode, i10 adjusts batch-size according to workloads.
+
+batch_nr
+--------
+Number of requests for batching read/write requests
+Default: 16
+
+batch_bytes
+-----------
+Number of bytes for batching write requests
+Default: 65536 (bytes)
+
+batch_timeout
+-------------
+Timeout value for batching (in microseconds)
+Default: 50 (us)
+
+batch_adaptive
+--------------
+Use the adaptive mode for adjusting batch-size
+Default: 1 (enabled)
diff --git a/block/Kconfig.iosched b/block/Kconfig.iosched
index 2f2158e..5b3623b 100644
--- a/block/Kconfig.iosched
+++ b/block/Kconfig.iosched
@@ -44,6 +44,14 @@ config BFQ_CGROUP_DEBUG
Enable some debugging help. Currently it exports additional stat
files in a cgroup which can be useful for debugging.

+config MQ_IOSCHED_I10
+ tristate "i10 I/O scheduler"
+ default y
+ help
+ The i10 I/O Scheduler supports batching at BLK-MQ.
+ Any device driver that benefits from batching
+ (e.g., NVMe-over-TCP) can use this scheduler.
+
endmenu

endif
diff --git a/block/Makefile b/block/Makefile
index 8d841f5..27e0789 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_BLK_CGROUP_IOLATENCY) += blk-iolatency.o
obj-$(CONFIG_BLK_CGROUP_IOCOST) += blk-iocost.o
obj-$(CONFIG_MQ_IOSCHED_DEADLINE) += mq-deadline.o
obj-$(CONFIG_MQ_IOSCHED_KYBER) += kyber-iosched.o
+obj-$(CONFIG_MQ_IOSCHED_I10) += i10-iosched.o
bfq-y := bfq-iosched.o bfq-wf2q.o bfq-cgroup.o
obj-$(CONFIG_IOSCHED_BFQ) += bfq.o

diff --git a/block/i10-iosched.c b/block/i10-iosched.c
new file mode 100644
index 0000000..f14ae3fc
--- /dev/null
+++ b/block/i10-iosched.c
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The i10 I/O Scheduler - supports batching at blk-mq.
+ * The main use case is disaggregated storage access
+ * using NVMe-over-Fabric (e.g., NVMe-over-TCP device driver).
+ *
+ * An early version of the idea is described and evaluated in
+ * "TCP ≈ RDMA: CPU-efficient Remote Storage Access with i10",
+ * USENIX NSDI 2020.
+ *
+ * Copyright (C) 2020 Cornell University
+ * Jaehyun Hwang <jaehyun.hwang@xxxxxxxxxxx>
+ * Qizhe Cai <qc228@xxxxxxxxxxx>
+ * Midhul Vuppalapati <mvv25@xxxxxxxxxxx%>
+ * Rachit Agarwal <ragarwal@xxxxxxxxxxx>
+ */
+
+#include <linux/kernel.h>
+#include <linux/blkdev.h>
+#include <linux/blk-mq.h>
+#include <linux/elevator.h>
+#include <linux/module.h>
+#include <linux/sbitmap.h>
+
+#include "blk.h"
+#include "blk-mq.h"
+#include "blk-mq-debugfs.h"
+#include "blk-mq-sched.h"
+#include "blk-mq-tag.h"
+
+/* Default batch size in number of requests */
+#define I10_DEF_BATCH_NR 16
+/* Default batch size in bytes (for write requests) */
+#define I10_DEF_BATCH_BYTES 65536
+/* Default timeout value for batching (us units) */
+#define I10_DEF_BATCH_TIMEOUT 50
+
+enum i10_state {
+ /* Batching state:
+ * Do not run dispatching until we have
+ * a certain amount of requests or a timer expires.
+ */
+ I10_STATE_BATCH,
+
+ /* Dispatching state:
+ * Run dispatching until all requests in the
+ * scheduler's hctx ihq are dispatched.
+ */
+ I10_STATE_DISPATCH,
+};
+
+struct i10_queue_data {
+ struct request_queue *q;
+
+ unsigned int def_batch_nr;
+ unsigned int def_batch_bytes;
+ unsigned int def_batch_timeout;
+ unsigned int def_batch_adaptive;
+};
+
+struct i10_hctx_queue {
+ spinlock_t lock;
+ struct list_head rq_list;
+
+ struct blk_mq_hw_ctx *hctx;
+
+ unsigned int batch_nr;
+ unsigned int batch_bytes;
+ unsigned int batch_timeout;
+
+ unsigned int qlen_nr;
+ unsigned int qlen_bytes;
+
+ unsigned int active_nr;
+ int timeout_count;
+
+ struct hrtimer dispatch_timer;
+ enum i10_state state;
+};
+
+static struct i10_queue_data *i10_queue_data_alloc(struct request_queue *q)
+{
+ struct i10_queue_data *iqd;
+
+ iqd = kzalloc_node(sizeof(*iqd), GFP_KERNEL, q->node);
+ if (!iqd)
+ return ERR_PTR(-ENOMEM);
+
+ iqd->q = q;
+ iqd->def_batch_nr = I10_DEF_BATCH_NR;
+ iqd->def_batch_bytes = I10_DEF_BATCH_BYTES;
+ iqd->def_batch_timeout = I10_DEF_BATCH_TIMEOUT;
+ iqd->def_batch_adaptive = 1;
+
+ return iqd;
+}
+
+static int i10_init_sched(struct request_queue *q, struct elevator_type *e)
+{
+ struct i10_queue_data *iqd;
+ struct elevator_queue *eq;
+
+ eq = elevator_alloc(q, e);
+ if (!eq)
+ return -ENOMEM;
+
+ iqd = i10_queue_data_alloc(q);
+ if (IS_ERR(iqd)) {
+ kobject_put(&eq->kobj);
+ return PTR_ERR(iqd);
+ }
+
+ blk_stat_enable_accounting(q);
+
+ eq->elevator_data = iqd;
+ q->elevator = eq;
+
+ return 0;
+}
+
+static void i10_exit_sched(struct elevator_queue *e)
+{
+ struct i10_queue_data *iqd = e->elevator_data;
+
+ kfree(iqd);
+}
+
+static void i10_hctx_adaptive_batch_size(struct blk_mq_hw_ctx *hctx,
+ bool timeout)
+{
+ struct i10_queue_data *iqd = hctx->queue->elevator->elevator_data;
+ struct i10_hctx_queue *ihq = hctx->sched_data;
+ unsigned int cur_nr = ihq->batch_nr;
+
+ if (!iqd->def_batch_adaptive) {
+ if (ihq->batch_nr)
+ ihq->batch_nr = 0;
+ return;
+ }
+
+ if (!ihq->batch_nr)
+ ihq->batch_nr = iqd->def_batch_nr;
+
+ if (timeout && ihq->timeout_count > 1) {
+ ihq->batch_nr = max(ihq->batch_nr >> 1, 1U);
+ ihq->timeout_count = 0;
+ }
+ else if (!timeout && ihq->batch_nr < ihq->active_nr)
+ ihq->batch_nr = min(ihq->batch_nr + 1,
+ iqd->def_batch_nr);
+}
+
+enum hrtimer_restart i10_hctx_timeout_handler(struct hrtimer *timer)
+{
+ struct i10_hctx_queue *ihq =
+ container_of(timer, struct i10_hctx_queue,
+ dispatch_timer);
+
+ ihq->state = I10_STATE_DISPATCH;
+ ihq->timeout_count++;
+ i10_hctx_adaptive_batch_size(ihq->hctx, true);
+ blk_mq_run_hw_queue(ihq->hctx, true);
+
+ return HRTIMER_NORESTART;
+}
+
+static void i10_hctx_queue_reset(struct i10_hctx_queue *ihq)
+{
+ ihq->qlen_nr = 0;
+ ihq->qlen_bytes = 0;
+ ihq->state = I10_STATE_BATCH;
+}
+
+static int i10_init_hctx(struct blk_mq_hw_ctx *hctx, unsigned int hctx_idx)
+{
+ struct i10_hctx_queue *ihq;
+
+ ihq = kzalloc_node(sizeof(*ihq), GFP_KERNEL, hctx->numa_node);
+ if (!ihq)
+ return -ENOMEM;
+
+ spin_lock_init(&ihq->lock);
+ INIT_LIST_HEAD(&ihq->rq_list);
+
+ ihq->hctx = hctx;
+ ihq->batch_nr = 0;
+ ihq->batch_bytes = 0;
+ ihq->batch_timeout = 0;
+ ihq->active_nr = 0;
+ ihq->timeout_count = 0;
+
+ hrtimer_init(&ihq->dispatch_timer,
+ CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ ihq->dispatch_timer.function = &i10_hctx_timeout_handler;
+
+ i10_hctx_queue_reset(ihq);
+
+ hctx->sched_data = ihq;
+
+ return 0;
+}
+
+static void i10_exit_hctx(struct blk_mq_hw_ctx *hctx, unsigned int hctx_idx)
+{
+ struct i10_hctx_queue *ihq = hctx->sched_data;
+
+ hrtimer_cancel(&ihq->dispatch_timer);
+ kfree(hctx->sched_data);
+}
+
+static bool i10_hctx_bio_merge(struct blk_mq_hw_ctx *hctx, struct bio *bio,
+ unsigned int nr_segs)
+{
+ struct i10_hctx_queue *ihq = hctx->sched_data;
+ struct list_head *rq_list = &ihq->rq_list;
+ bool merged;
+
+ spin_lock(&ihq->lock);
+ merged = blk_bio_list_merge(hctx->queue, rq_list, bio, nr_segs);
+ spin_unlock(&ihq->lock);
+
+ if (merged && bio_data_dir(bio) == WRITE)
+ ihq->qlen_bytes += bio->bi_iter.bi_size;
+
+ return merged;
+}
+
+/*
+ * The batch size can be adjusted dynamically on a per-hctx basis.
+ * Use per-hctx variables in that case.
+ */
+static inline unsigned int i10_hctx_batch_nr(struct blk_mq_hw_ctx *hctx)
+{
+ struct i10_queue_data *iqd = hctx->queue->elevator->elevator_data;
+ struct i10_hctx_queue *ihq = hctx->sched_data;
+
+ return ihq->batch_nr ?
+ ihq->batch_nr : iqd->def_batch_nr;
+}
+
+static inline unsigned int i10_hctx_batch_bytes(struct blk_mq_hw_ctx *hctx)
+{
+ struct i10_queue_data *iqd = hctx->queue->elevator->elevator_data;
+ struct i10_hctx_queue *ihq = hctx->sched_data;
+
+ return ihq->batch_bytes ?
+ ihq->batch_bytes : iqd->def_batch_bytes;
+}
+
+static inline unsigned int i10_hctx_batch_timeout(struct blk_mq_hw_ctx *hctx)
+{
+ struct i10_queue_data *iqd = hctx->queue->elevator->elevator_data;
+ struct i10_hctx_queue *ihq = hctx->sched_data;
+
+ return ihq->batch_timeout ?
+ ihq->batch_timeout : iqd->def_batch_timeout;
+}
+
+static void i10_hctx_insert_update(struct i10_hctx_queue *ihq,
+ struct request *rq)
+{
+ if (rq_data_dir(rq) == WRITE)
+ ihq->qlen_bytes += blk_rq_bytes(rq);
+ ihq->qlen_nr++;
+}
+
+static void i10_hctx_insert_requests(struct blk_mq_hw_ctx *hctx,
+ struct list_head *rq_list, bool at_head)
+{
+ struct i10_hctx_queue *ihq = hctx->sched_data;
+ struct request *rq, *next;
+
+ list_for_each_entry_safe(rq, next, rq_list, queuelist) {
+ struct list_head *head = &ihq->rq_list;
+
+ spin_lock(&ihq->lock);
+ if (at_head)
+ list_move(&rq->queuelist, head);
+ else
+ list_move_tail(&rq->queuelist, head);
+ i10_hctx_insert_update(ihq, rq);
+ blk_mq_sched_request_inserted(rq);
+ spin_unlock(&ihq->lock);
+ }
+
+ /* Start a new timer */
+ if (ihq->state == I10_STATE_BATCH &&
+ !hrtimer_active(&ihq->dispatch_timer))
+ hrtimer_start(&ihq->dispatch_timer,
+ ns_to_ktime(i10_hctx_batch_timeout(hctx)
+ * NSEC_PER_USEC),
+ HRTIMER_MODE_REL);
+}
+
+static struct request *i10_hctx_dispatch_request(struct blk_mq_hw_ctx *hctx)
+{
+ struct i10_hctx_queue *ihq = hctx->sched_data;
+ struct request *rq;
+
+ spin_lock(&ihq->lock);
+ rq = list_first_entry_or_null(&ihq->rq_list,
+ struct request, queuelist);
+ if (rq) {
+ list_del_init(&rq->queuelist);
+ ihq->active_nr++;
+ }
+ else {
+ i10_hctx_queue_reset(ihq);
+ i10_hctx_adaptive_batch_size(hctx, false);
+ }
+ spin_unlock(&ihq->lock);
+
+ return rq;
+}
+
+static void i10_hctx_completed_request(struct request *rq, u64 now)
+{
+ struct i10_hctx_queue *ihq = rq->mq_hctx->sched_data;
+
+ if (ihq->active_nr)
+ ihq->active_nr--;
+}
+
+static inline bool i10_hctx_dispatch_now(struct blk_mq_hw_ctx *hctx)
+{
+ struct i10_hctx_queue *ihq = hctx->sched_data;
+
+ return (ihq->qlen_nr >= i10_hctx_batch_nr(hctx)) ||
+ (ihq->qlen_bytes >= i10_hctx_batch_bytes(hctx));
+}
+
+/*
+ * Return true if we are in the dispatching state.
+ */
+static bool i10_hctx_has_work(struct blk_mq_hw_ctx *hctx)
+{
+ struct i10_hctx_queue *ihq = hctx->sched_data;
+
+ if (ihq->state == I10_STATE_BATCH) {
+ if (i10_hctx_dispatch_now(hctx)) {
+ ihq->state = I10_STATE_DISPATCH;
+ ihq->timeout_count = 0;
+ if (hrtimer_active(&ihq->dispatch_timer))
+ hrtimer_cancel(&ihq->dispatch_timer);
+ }
+ }
+
+ return (ihq->state == I10_STATE_DISPATCH);
+}
+
+#define I10_DEF_BATCH_SHOW_STORE(name) \
+static ssize_t i10_def_batch_##name##_show(struct elevator_queue *e, \
+ char *page) \
+{ \
+ struct i10_queue_data *iqd = e->elevator_data; \
+ \
+ return sprintf(page, "%u\n", iqd->def_batch_##name); \
+} \
+ \
+static ssize_t i10_def_batch_##name##_store(struct elevator_queue *e, \
+ const char *page, size_t count) \
+{ \
+ struct i10_queue_data *iqd = e->elevator_data; \
+ unsigned long long value; \
+ int ret; \
+ \
+ ret = kstrtoull(page, 10, &value); \
+ if (ret) \
+ return ret; \
+ \
+ iqd->def_batch_##name = value; \
+ \
+ return count; \
+}
+I10_DEF_BATCH_SHOW_STORE(nr);
+I10_DEF_BATCH_SHOW_STORE(bytes);
+I10_DEF_BATCH_SHOW_STORE(timeout);
+I10_DEF_BATCH_SHOW_STORE(adaptive);
+#undef I10_DEF_BATCH_SHOW_STORE
+
+#define I10_SCHED_ATTR(name) \
+ __ATTR(batch_##name, 0644, i10_def_batch_##name##_show, i10_def_batch_##name##_store)
+static struct elv_fs_entry i10_sched_attrs[] = {
+ I10_SCHED_ATTR(nr),
+ I10_SCHED_ATTR(bytes),
+ I10_SCHED_ATTR(timeout),
+ I10_SCHED_ATTR(adaptive),
+ __ATTR_NULL
+};
+#undef I10_SCHED_ATTR
+
+#ifdef CONFIG_BLK_DEBUG_FS
+#define I10_DEBUGFS_SHOW(name) \
+static int i10_hctx_batch_##name##_show(void *data, struct seq_file *m) \
+{ \
+ struct blk_mq_hw_ctx *hctx = data; \
+ struct i10_hctx_queue *ihq = hctx->sched_data; \
+ \
+ seq_printf(m, "%u\n", ihq->batch_##name); \
+ return 0; \
+} \
+ \
+static int i10_hctx_qlen_##name##_show(void *data, struct seq_file *m) \
+{ \
+ struct blk_mq_hw_ctx *hctx = data; \
+ struct i10_hctx_queue *ihq = hctx->sched_data; \
+ \
+ seq_printf(m, "%u\n", ihq->qlen_##name); \
+ return 0; \
+}
+I10_DEBUGFS_SHOW(nr);
+I10_DEBUGFS_SHOW(bytes);
+#undef I10_DEBUGFS_SHOW
+
+static int i10_hctx_state_show(void *data, struct seq_file *m)
+{
+ struct blk_mq_hw_ctx *hctx = data;
+ struct i10_hctx_queue *ihq = hctx->sched_data;
+
+ seq_printf(m, "%d\n", ihq->state);
+ return 0;
+}
+
+#define I10_HCTX_QUEUE_ATTR(name) \
+ {"batch_" #name, 0400, i10_hctx_batch_##name##_show}, \
+ {"qlen_" #name, 0400, i10_hctx_qlen_##name##_show}
+static const struct blk_mq_debugfs_attr i10_hctx_debugfs_attrs[] = {
+ I10_HCTX_QUEUE_ATTR(nr),
+ I10_HCTX_QUEUE_ATTR(bytes),
+ {"state", 0400, i10_hctx_state_show},
+ {},
+};
+#undef I10_HCTX_QUEUE_ATTR
+#endif
+
+static struct elevator_type i10_sched = {
+ .ops = {
+ .init_sched = i10_init_sched,
+ .exit_sched = i10_exit_sched,
+ .init_hctx = i10_init_hctx,
+ .exit_hctx = i10_exit_hctx,
+ .bio_merge = i10_hctx_bio_merge,
+ .insert_requests = i10_hctx_insert_requests,
+ .dispatch_request = i10_hctx_dispatch_request,
+ .completed_request = i10_hctx_completed_request,
+ .has_work = i10_hctx_has_work,
+ },
+#ifdef CONFIG_BLK_DEBUG_FS
+ .hctx_debugfs_attrs = i10_hctx_debugfs_attrs,
+#endif
+ .elevator_attrs = i10_sched_attrs,
+ .elevator_name = "i10",
+ .elevator_owner = THIS_MODULE,
+};
+
+static int __init i10_init(void)
+{
+ return elv_register(&i10_sched);
+}
+
+static void __exit i10_exit(void)
+{
+ elv_unregister(&i10_sched);
+}
+
+module_init(i10_init);
+module_exit(i10_exit);
+
+MODULE_AUTHOR("Jaehyun Hwang, Qizhe Cai, Midhul Vuppalapati, Rachit Agarwal");
+MODULE_LICENSE("GPLv2");
+MODULE_DESCRIPTION("i10 I/O scheduler");
--
2.7.4