[PATCH v2 09/19] ARM: dts: sunxi: h3/h5: Add CSI controller port for parallel input

[Paul Kocialkowski]

Since the CSI controller binding is getting a bit more complex due
to the addition of MIPI CSI-2 bridge support, make the ports node
explicit with the parallel port.

This way, it's clear that the controller only supports parallel
interface input and there's no confusion about the port number.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx>
---
 arch/arm/boot/dts/sunxi-h3-h5.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 9be13378d4df..02b698cace6a 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -803,6 +803,15 @@ csi: camera@1cb0000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&csi_pins>;
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				csi_in_parallel: port@0 {
+					reg = <0>;
+				};
+			};
 		};
 
 		hdmi: hdmi@1ee0000 {
-- 
2.29.2