wm8960: add DAC Slope switch
From: Lukas F. Hartmann
Date: Tue Nov 24 2020 - 12:23:45 EST
The WM8960 DAC has a "DAC Slope" switch that can toggle between two
different output filter curves. This patch adds support for it.
Signed-off-by: Lukas F. Hartmann <lukas@xxxxxxxxx>
---
sound/soc/codecs/wm8960.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/sound/soc/codecs/wm8960.c b/sound/soc/codecs/wm8960.c
index 660ec46ee..a15cd037d 100644
--- a/sound/soc/codecs/wm8960.c
+++ b/sound/soc/codecs/wm8960.c
@@ -126,6 +126,7 @@ struct wm8960_priv {
struct snd_soc_dapm_widget *rout1;
struct snd_soc_dapm_widget *out3;
bool deemph;
+ bool dacslope;
int lrclk;
int bclk;
int sysclk;
@@ -217,6 +218,33 @@ static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
return wm8960_set_deemph(component);
}
+static int wm8960_put_dacslope(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
+ unsigned int val = ucontrol->value.integer.value[0];
+
+ if (val > 1)
+ return -EINVAL;
+
+ wm8960->dacslope = val;
+
+ return snd_soc_component_update_bits(component, WM8960_DACCTL1,
+ 0x2, val<<1);
+}
+
+static int wm8960_get_dacslope(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
+ struct wm8960_priv *wm8960 = snd_soc_component_get_drvdata(component);
+
+ ucontrol->value.integer.value[0] = wm8960->dacslope;
+ return 0;
+}
+
+
static const DECLARE_TLV_DB_SCALE(adc_tlv, -9750, 50, 1);
static const DECLARE_TLV_DB_SCALE(inpga_tlv, -1725, 75, 0);
static const DECLARE_TLV_DB_SCALE(dac_tlv, -12750, 50, 1);
@@ -272,6 +300,9 @@ SOC_ENUM("DAC Polarity", wm8960_enum[1]),
SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0,
wm8960_get_deemph, wm8960_put_deemph),
+SOC_SINGLE_BOOL_EXT("DAC Slope", 0,
+ wm8960_get_dacslope, wm8960_put_dacslope),
+
SOC_ENUM("3D Filter Upper Cut-Off", wm8960_enum[2]),
SOC_ENUM("3D Filter Lower Cut-Off", wm8960_enum[3]),
SOC_SINGLE("3D Volume", WM8960_3D, 1, 15, 0),
--
2.28.0