Re: [PATCH] e1000e: Assign DPM_FLAG_SMART_SUSPEND and DPM_FLAG_MAY_SKIP_RESUME to speed up s2ram

From: Kai-Heng Feng
Date: Tue Nov 24 2020 - 12:17:38 EST


Hi Yu,

> On Nov 24, 2020, at 23:32, Chen Yu <yu.c.chen@xxxxxxxxx> wrote:
>
> The NIC is put in runtime suspend status when there is no wire connected.
> As a result, it is safe to keep this NIC in runtime suspended during s2ram
> because the system does not rely on the NIC plug event nor WOL to wake up
> the system. Unlike the s2idle, s2ram does not need to manipulate S0ix settings
> during suspend.

Please see below for the reason why I explicitly disable direct-complete in the driver.

>
> This patch assigns DPM_FLAG_SMART_SUSPEND and DPM_FLAG_MAY_SKIP_RESUME
> to the e1000e driver so that the s2ram could skip the .suspend_late(),
> .suspend_noirq() and .resume_noirq() .resume_early() when possible.
> Also skip .suspend() and .resume() if dev_pm_skip_suspend() and
> dev_pm_skip_resume() return true, so as to speed up the s2ram.

If we really want direct-complete here, maybe always set current WoL setting in runtime suspend routine?

>
> Signed-off-by: Chen Yu <yu.c.chen@xxxxxxxxx>
> ---
> drivers/base/power/main.c | 2 ++
> drivers/net/ethernet/intel/e1000e/netdev.c | 14 +++++++++++++-
> 2 files changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
> index c7ac49042cee..9cd8abba8612 100644
> --- a/drivers/base/power/main.c
> +++ b/drivers/base/power/main.c
> @@ -580,6 +580,7 @@ bool dev_pm_skip_resume(struct device *dev)
>
> return !dev->power.must_resume;
> }
> +EXPORT_SYMBOL_GPL(dev_pm_skip_resume);

I don't think it's a good idea to use this predicate out side of PM core, must_resume may change during suspend process.

>
> /**
> * device_resume_noirq - Execute a "noirq resume" callback for given device.
> @@ -2010,3 +2011,4 @@ bool dev_pm_skip_suspend(struct device *dev)
> return dev_pm_test_driver_flags(dev, DPM_FLAG_SMART_SUSPEND) &&
> pm_runtime_status_suspended(dev);
> }
> +EXPORT_SYMBOL_GPL(dev_pm_skip_suspend);
> diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
> index b30f00891c03..d79fddabc553 100644
> --- a/drivers/net/ethernet/intel/e1000e/netdev.c
> +++ b/drivers/net/ethernet/intel/e1000e/netdev.c
> @@ -6965,6 +6965,14 @@ static __maybe_unused int e1000e_pm_suspend(struct device *dev)
> struct e1000_hw *hw = &adapter->hw;
> int rc;
>
> + /* Runtime suspended means that there is no wired connection
> + * and it has nothing to do with WOL that, we don't need to
> + * adjust the WOL settings. So it is safe to put NIC in
> + * runtime suspend while doing system suspend.
> + */

What about plugging ethernet cable and using WoL after system is suspended?
Commit "e1000e: Exclude device from suspend direct complete optimization" was to address that scenario.

> + if (dev_pm_skip_suspend(dev))
> + return 0;
> +
> e1000e_flush_lpic(pdev);
>
> e1000e_pm_freeze(dev);
> @@ -6989,6 +6997,9 @@ static __maybe_unused int e1000e_pm_resume(struct device *dev)
> struct e1000_hw *hw = &adapter->hw;
> int rc;
>
> + if (dev_pm_skip_resume(dev))
> + return 0;
> +
> /* Introduce S0ix implementation */
> if (hw->mac.type >= e1000_pch_cnp &&
> !e1000e_check_me(hw->adapter->pdev->device))
> @@ -7665,7 +7676,8 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
>
> e1000_print_device_info(adapter);
>
> - dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE);
> + dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE |
> + DPM_FLAG_SMART_SUSPEND | DPM_FLAG_MAY_SKIP_RESUME);
>
> if (pci_dev_run_wake(pdev) && hw->mac.type < e1000_pch_cnp)
> pm_runtime_put_noidle(&pdev->dev);

Also, most e1000e device on modern platforms doesn't runtime suspend at all after commit "e1000e: Disable runtime PM on CNP+".

Kai-Heng

> --
> 2.25.1
>