Re: [PATCH v22 5/5] remoteproc: Add initial zynqmp R5 remoteproc driver

From: Mathieu Poirier
Date: Thu Nov 05 2020 - 10:51:54 EST


Hi,

On Wed, Nov 04, 2020 at 09:57:40PM +0000, Ben Levinsky wrote:
> Hi Mathieu,
>
> > -----Original Message-----
> > From: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> > Sent: Wednesday, November 4, 2020 1:30 PM
> > To: Ben Levinsky <BLEVINSK@xxxxxxxxxx>
> > Cc: michael.auchter@xxxxxx; Stefano Stabellini <stefanos@xxxxxxxxxx>;
> > devicetree@xxxxxxxxxxxxxxx; linux-remoteproc@xxxxxxxxxxxxxxx; linux-
> > kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > Subject: Re: [PATCH v22 5/5] remoteproc: Add initial zynqmp R5 remoteproc
> > driver
> >
> > On Tue, Nov 03, 2020 at 10:23:39AM -0800, Ben Levinsky wrote:
> > > R5 is included in Xilinx Zynq UltraScale MPSoC so by adding this
> > > remotproc driver, we can boot the R5 sub-system in different 2
> > > configurations -
> > > * split
> > > * lock-step
> > >
> > > The Xilinx R5 Remoteproc Driver boots the R5's via calls to the Xilinx
> > > Platform Management Unit that handles the R5 configuration, memory
> > access
> > > and R5 lifecycle management. The interface to this manager is done in this
> > > driver via zynqmp_pm_* function calls.
> > >
> > > Signed-off-by: Wendy Liang <wendy.liang@xxxxxxxxxx>
> > > Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
> > > Signed-off-by: Ed Mooring <ed.mooring@xxxxxxxxxx>
> > > Signed-off-by: Jason Wu <j.wu@xxxxxxxxxx>
> > > Signed-off-by: Ben Levinsky <ben.levinsky@xxxxxxxxxx>
> > > ---
> > > - update documented param list for zynqmp_r5_probe
> > > - remove use-after-free lines in zynqmp_r5_probe,
> > > zynqmp_r5_remoteproc_probe, and zynqmp_r5_remoteproc_remove
> > > - update path for error handling in zynqmp_r5_probe and
> > > zynqmp_r5_remoteproc_probe
> > > - as the mbox properties are optional, update zynqmp_r5_rproc_kick
> > > so that the mailbox functionality only occurs if these
> > > properties are provided
> > > ---
> > > drivers/remoteproc/Kconfig | 8 +
> > > drivers/remoteproc/Makefile | 1 +
> > > drivers/remoteproc/zynqmp_r5_remoteproc.c | 778
> > ++++++++++++++++++++++
> >
> > Many of my comments from V19 have not been addressed and as such I will
> > not move
> > foward with this set. Moreover I will not consider a new revision before
> > November 18th.
> >
>
> Thank you for the advance notice.
>
> As for V19 comments that are unresolved, can you expand on which ones?
> From the v19 review here is a list of the comments with your comments surrounded by quotes
> and how I had thought these were addressed.
>
> "
> As far as I can see zynqmp_r5_rproc::dt_node is not needed
> "
>
> I removed the field zynqmp_r5_rproc::dt_node and its no longer used in the file
>
> "
> > + z_rproc->dev = &rproc_ptr->dev;
> > + z_rproc->dev->of_node = node;
>
> This is quite hackish to me. The problem is that @pdev is the rpu'a DT node
> rather than the r5_X's DT node. I suggest to have a look at k3_r5_probe()[1],
> especially at how devm_of_platform_populate() is called on @dev and from there
> how the platform device for each r5 is retreived using the same
> for_each_available_child_of_node() loop you also have.
> "
> As I understand it this is resolved as now @pdev is the r5_X's DT node similar to the k3_r5_probe()
> Also the 2 lines in question are now removed in the v22 patch
>
>
> "> + struct zynqmp_r5_rproc *core;
>
> Please call variables of type zynqmp_r5_rproc the same name throughout the file.
> "
> So in zynqmp_r5_probe there is an instance of a zynqmp_r5_rproc** with the name core, this is because
> there is already arg with name z_rproc and z_rproc_ptr or something like this may be confusing.
>
> With that being said, instead the zynqmp_r5_rproc** can be renamed to z_rproc if this is what you
> mean?
>
> "
> > + rpu_mode = of_property_read_bool(dev->of_node, "lockstep-mode") ?
> > + PM_RPU_MODE_LOCKSTEP : PM_RPU_MODE_SPLIT;


>
> Indentation problem. Note that is it now permitted to go beyond 80 characters
> per line.
> "
>
> In v22 patch this is now:
> rpu_mode = of_property_read_bool(dev->of_node, "lockstep-mode") ?
> PM_RPU_MODE_LOCKSTEP : PM_RPU_MODE_SPLIT;
>
> Is this indentation alright?

rpu_mode = of_property_read_bool(dev->of_node, "lockstep-mode") ?
PM_RPU_MODE_LOCKSTEP : PM_RPU_MODE_SPLIT;

As always, the following lines need to be aligned with the '(' of the first
line.

>
> "
> > + i = 0;
>
> What is the above for? As fas as I can tell 'i' is not used in the loop below.
> "
> In v19 this var was deprecated, but as per feedback from Michael A. in later revisions there was unhandled
> case of R5_0 successfully initializating but R5_1 failing. To accommodate this case the var i was
> re-introduced. If the name is unclear then it can be refactored if this is the intention

If variable 'i' is not used in the loop, how can it be responsible for the
failure reported by Michael?

>
> "
> > + struct list_head *pos, *cluster = (struct list_head *)
> > + platform_get_drvdata(pdev);
>
> Either align the 'p' with the '(' or simply do the assignement on another line
> below.
> "
>
> This may be formatting on my terminal vs. the patch format itself but in v22 I think this is resolved.
>
>
>
> If still 1 or more of these comments or another is not addressed then my apologies and will address in the next revision. Again, thank you for the review!

Despite the fact that I pointed it out in V19, there is plenty of sentences in
the DT yaml file that don't start with a capital letter.

Mathieu

>
> Best,
> Ben
>
>
>
> > > 3 files changed, 787 insertions(+)
> > > create mode 100644 drivers/remoteproc/zynqmp_r5_remoteproc.c
> > >
> > > diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> > > index c6659dfea7c7..c2fe54b1d94f 100644
> > > --- a/drivers/remoteproc/Kconfig
> > > +++ b/drivers/remoteproc/Kconfig
> > > @@ -275,6 +275,14 @@ config TI_K3_DSP_REMOTEPROC
> > > It's safe to say N here if you're not interested in utilizing
> > > the DSP slave processors.
> > >
> > > +config ZYNQMP_R5_REMOTEPROC
> > > + tristate "ZynqMP R5 remoteproc support"
> > > + depends on PM && ARCH_ZYNQMP
> > > + select RPMSG_VIRTIO
> > > + select ZYNQMP_IPI_MBOX
> > > + help
> > > + Say y or m here to support ZynqMP R5 remote processors via the
> > remote
> > > + processor framework.
> > > endif # REMOTEPROC
> > >
> > > endmenu
> > > diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
> > > index 3dfa28e6c701..ef1abff654c2 100644
> > > --- a/drivers/remoteproc/Makefile
> > > +++ b/drivers/remoteproc/Makefile
> > > @@ -33,3 +33,4 @@ obj-$(CONFIG_ST_REMOTEPROC) +=
> > st_remoteproc.o
> > > obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o
> > > obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o
> > > obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o
> > > +obj-$(CONFIG_ZYNQMP_R5_REMOTEPROC) += zynqmp_r5_remoteproc.o
> > > diff --git a/drivers/remoteproc/zynqmp_r5_remoteproc.c
> > b/drivers/remoteproc/zynqmp_r5_remoteproc.c
> > > new file mode 100644
> > > index 000000000000..48bffa91bc00
> > > --- /dev/null
> > > +++ b/drivers/remoteproc/zynqmp_r5_remoteproc.c
> > > @@ -0,0 +1,779 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Zynq R5 Remote Processor driver
> > > + *
> > > + * Based on origin OMAP and Zynq Remote Processor driver
> > > + *
> > > + */
> > > +
> > > +#include <linux/firmware/xlnx-zynqmp.h>
> > > +#include <linux/interrupt.h>
> > > +#include <linux/kernel.h>
> > > +#include <linux/list.h>
> > > +#include <linux/mailbox_client.h>
> > > +#include <linux/mailbox/zynqmp-ipi-message.h>
> > > +#include <linux/module.h>
> > > +#include <linux/of_address.h>
> > > +#include <linux/of_platform.h>
> > > +#include <linux/of_reserved_mem.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/remoteproc.h>
> > > +#include <linux/skbuff.h>
> > > +#include <linux/sysfs.h>
> > > +
> > > +#include "remoteproc_internal.h"
> > > +
> > > +#define MAX_RPROCS 2 /* Support up to 2 RPU */
> > > +#define MAX_MEM_PNODES 4 /* Max power nodes for one RPU memory
> > instance */
> > > +
> > > +#define BANK_LIST_PROP "meta-memory-regions"
> > > +#define DDR_LIST_PROP "memory-regions"
> > > +
> > > +/* IPI buffer MAX length */
> > > +#define IPI_BUF_LEN_MAX 32U
> > > +/* RX mailbox client buffer max length */
> > > +#define RX_MBOX_CLIENT_BUF_MAX (IPI_BUF_LEN_MAX + \
> > > + sizeof(struct zynqmp_ipi_message))
> > > +
> > > +/**
> > > + * struct zynqmp_r5_mem - zynqmp rpu memory data
> > > + * @pnode_id: TCM power domain ids
> > > + * @res: memory resource
> > > + * @node: list node
> > > + */
> > > +struct zynqmp_r5_mem {
> > > + u32 pnode_id[MAX_MEM_PNODES];
> > > + struct resource res;
> > > + struct list_head node;
> > > +};
> > > +
> > > +/**
> > > + * struct zynqmp_r5_rproc - zynqmp rpu remote processor state
> > > + * this is for each individual R5 core's state
> > > + *
> > > + * @rx_mc_buf: rx mailbox client buffer to save the rx message
> > > + * @tx_mc: tx mailbox client
> > > + * @rx_mc: rx mailbox client * @dev: device of RPU instance
> > > + * @mbox_work: mbox_work for the RPU remoteproc
> > > + * @tx_mc_skbs: socket buffers for tx mailbox client
> > > + * @dev: device of RPU instance
> > > + * @rproc: rproc handle
> > > + * @tx_chan: tx mailbox channel
> > > + * @rx_chan: rx mailbox channel
> > > + * @pnode_id: RPU CPU power domain id
> > > + * @elem: linked list item
> > > + * @dt_node: device tree node that holds information for 1 R5 core.
> > > + */
> > > +struct zynqmp_r5_rproc {
> > > + unsigned char rx_mc_buf[RX_MBOX_CLIENT_BUF_MAX];
> > > + struct mbox_client tx_mc;
> > > + struct mbox_client rx_mc;
> > > + struct work_struct mbox_work;
> > > + struct sk_buff_head tx_mc_skbs;
> > > + struct device *dev;
> > > + struct rproc *rproc;
> > > + struct mbox_chan *tx_chan;
> > > + struct mbox_chan *rx_chan;
> > > + u32 pnode_id;
> > > + struct list_head elem;
> > > +};
> > > +
> > > +/*
> > > + * r5_set_mode - set RPU operation mode
> > > + * @z_rproc: Remote processor private data
> > > + * @rpu_mode: mode specified by device tree to configure the RPU to
> > > + *
> > > + * set RPU operation mode
> > > + *
> > > + * Return: 0 for success, negative value for failure
> > > + */
> > > +static int r5_set_mode(struct zynqmp_r5_rproc *z_rproc,
> > > + enum rpu_oper_mode rpu_mode)
> > > +{
> > > + enum rpu_tcm_comb tcm_mode;
> > > + enum rpu_oper_mode cur_rpu_mode;
> > > + int ret;
> > > +
> > > + ret = zynqmp_pm_get_rpu_mode(z_rproc->pnode_id,
> > &cur_rpu_mode);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + if (rpu_mode != cur_rpu_mode) {
> > > + ret = zynqmp_pm_set_rpu_mode(z_rproc->pnode_id,
> > > + rpu_mode);
> > > + if (ret < 0)
> > > + return ret;
> > > + }
> > > +
> > > + tcm_mode = (rpu_mode == PM_RPU_MODE_LOCKSTEP) ?
> > > + PM_RPU_TCM_COMB : PM_RPU_TCM_SPLIT;
> > > + return zynqmp_pm_set_tcm_config(z_rproc->pnode_id, tcm_mode);
> > > +}
> > > +
> > > +/*
> > > + * release TCM banks when powering down R5 core
> > > + */
> > > +static int tcm_mem_release(struct rproc *rproc, struct rproc_mem_entry
> > *mem)
> > > +{
> > > + u32 pnode_id = (u64)mem->priv;
> > > +
> > > + iounmap(mem->va);
> > > + return zynqmp_pm_release_node(pnode_id);
> > > +}
> > > +
> > > +/*
> > > + * given ID corresponding to R5 core in Xilinx Platform management (xpm)
> > API,
> > > + * try to use xpm wake call to wake R5 core
> > > + */
> > > +static int zynqmp_r5_rproc_start(struct rproc *rproc)
> > > +{
> > > + struct zynqmp_r5_rproc *z_rproc = rproc->priv;
> > > + enum rpu_boot_mem bootmem;
> > > +
> > > + bootmem = (rproc->bootaddr & 0xF0000000) == 0xF0000000 ?
> > > + PM_RPU_BOOTMEM_HIVEC : PM_RPU_BOOTMEM_LOVEC;
> > > +
> > > + dev_dbg(rproc->dev.parent, "RPU boot from %s.",
> > > + bootmem == PM_RPU_BOOTMEM_HIVEC ? "OCM" : "TCM");
> > > +
> > > + return zynqmp_pm_request_wake(z_rproc->pnode_id, 1,
> > > + bootmem,
> > ZYNQMP_PM_REQUEST_ACK_NO);
> > > +}
> > > +
> > > +/*
> > > + * given ID corresponding to R5 core in Xilinx Platform management (xpm)
> > API,
> > > + * try to use xpm power down call to power off R5 core
> > > + */
> > > +static int zynqmp_r5_rproc_stop(struct rproc *rproc)
> > > +{
> > > + struct zynqmp_r5_rproc *z_rproc = rproc->priv;
> > > +
> > > + return zynqmp_pm_force_pwrdwn(z_rproc->pnode_id,
> > > + ZYNQMP_PM_REQUEST_ACK_BLOCKING);
> > > +}
> > > +
> > > +/*
> > > + * map in physical addr for DDR mem carveout in rproc
> > > + */
> > > +static int zynqmp_r5_rproc_mem_alloc(struct rproc *rproc,
> > > + struct rproc_mem_entry *mem)
> > > +{
> > > + void *va;
> > > +
> > > + va = ioremap_wc(mem->dma, mem->len);
> > > + if (IS_ERR_OR_NULL(va))
> > > + return -ENOMEM;
> > > +
> > > + /* Update memory entry va */
> > > + mem->va = va;
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +/* unmap rproc_mem_entry virtual addr */
> > > +static int zynqmp_r5_rproc_mem_release(struct rproc *rproc,
> > > + struct rproc_mem_entry *mem)
> > > +{
> > > + iounmap(mem->va);
> > > + return 0;
> > > +}
> > > +
> > > +/* construct rproc mem carveouts for DDR regions specified in device tree
> > */
> > > +static int parse_mem_regions(struct rproc *rproc)
> > > +{
> > > + int num_mems, i;
> > > + struct zynqmp_r5_rproc *z_rproc = rproc->priv;
> > > + struct device *dev = &rproc->dev;
> > > + struct device_node *np = z_rproc->dev->of_node;
> > > + struct rproc_mem_entry *mem;
> > > +
> > > + num_mems = of_count_phandle_with_args(np, DDR_LIST_PROP,
> > NULL);
> > > + if (num_mems <= 0)
> > > + return 0;
> > > +
> > > + for (i = 0; i < num_mems; i++) {
> > > + struct device_node *node;
> > > + struct reserved_mem *rmem;
> > > +
> > > + node = of_parse_phandle(np, DDR_LIST_PROP, i);
> > > + if (!node)
> > > + return -EINVAL;
> > > +
> > > + rmem = of_reserved_mem_lookup(node);
> > > + if (!rmem)
> > > + return -EINVAL;
> > > +
> > > + if (strstr(node->name, "vdev0vring")) {
> > > + int vring_id;
> > > + char name[16];
> > > +
> > > + /*
> > > + * expecting form of "rpuXvdev0vringX as documented
> > > + * in xilinx remoteproc device tree binding
> > > + */
> > > + if (strlen(node->name) < 15) {
> > > + dev_err(dev, "%pOF is less than 14 chars",
> > > + node);
> > > + return -EINVAL;
> > > + }
> > > +
> > > + /*
> > > + * can be 1 of multiple vring IDs per IPC channel
> > > + * e.g. 'vdev0vring0' and 'vdev0vring1'
> > > + */
> > > + vring_id = node->name[14] - '0';
> > > + snprintf(name, sizeof(name), "vdev0vring%d",
> > vring_id);
> > > + /* Register vring */
> > > + mem = rproc_mem_entry_init(dev, NULL,
> > > + (dma_addr_t)rmem->base,
> > > + rmem->size, rmem->base,
> > > +
> > zynqmp_r5_rproc_mem_alloc,
> > > +
> > zynqmp_r5_rproc_mem_release,
> > > + name);
> > > + } else {
> > > + /* Register DMA region */
> > > + int (*alloc)(struct rproc *r,
> > > + struct rproc_mem_entry *rme);
> > > + int (*release)(struct rproc *r,
> > > + struct rproc_mem_entry *rme);
> > > + char name[20];
> > > +
> > > + if (strstr(node->name, "vdev0buffer")) {
> > > + alloc = NULL;
> > > + release = NULL;
> > > + strcpy(name, "vdev0buffer");
> > > + } else {
> > > + alloc = zynqmp_r5_rproc_mem_alloc;
> > > + release = zynqmp_r5_rproc_mem_release;
> > > + strcpy(name, node->name);
> > > + }
> > > +
> > > + mem = rproc_mem_entry_init(dev, NULL,
> > > + (dma_addr_t)rmem->base,
> > > + rmem->size, rmem->base,
> > > + alloc, release, name);
> > > + }
> > > + if (!mem)
> > > + return -ENOMEM;
> > > +
> > > + rproc_add_carveout(rproc, mem);
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +/* call Xilinx Platform manager to request access to TCM bank */
> > > +static int zynqmp_r5_pm_request_tcm(struct device_node *tcm_node,
> > > + struct device *dev, u32 *pnode_id)
> > > +{
> > > + int ret;
> > > +
> > > + ret = of_property_read_u32(tcm_node, "pnode-id", pnode_id);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + return zynqmp_pm_request_node(*pnode_id,
> > ZYNQMP_PM_CAPABILITY_ACCESS, 0,
> > > + ZYNQMP_PM_REQUEST_ACK_BLOCKING);
> > > +}
> > > +
> > > +/*
> > > + * Given TCM bank entry,
> > > + * this callback will set device address for R5 running on TCM
> > > + * and also setup virtual address for TCM bank remoteproc carveout
> > > + */
> > > +static int tcm_mem_alloc(struct rproc *rproc,
> > > + struct rproc_mem_entry *mem)
> > > +{
> > > + void *va;
> > > + struct device *dev = rproc->dev.parent;
> > > +
> > > + va = ioremap_wc(mem->dma, mem->len);
> > > + if (IS_ERR_OR_NULL(va))
> > > + return -ENOMEM;
> > > +
> > > + /* Update memory entry va */
> > > + mem->va = va;
> > > +
> > > + va = devm_ioremap_wc(dev, mem->da, mem->len);
> > > + if (!va)
> > > + return -ENOMEM;
> > > + /* As R5 is 32 bit, wipe out extra high bits */
> > > + mem->da &= 0x000fffff;
> > > + /*
> > > + * TCM Banks 0A and 0B (0xffe00000 and 0xffe20000)
> > > + * are handled with the above line of code so do nothing
> > > + * for this 2 banks
> > > + */
> > > +
> > > + /*
> > > + * TCM Banks 1A and 1B (0xffe90000 and 0xffeb0000) still
> > > + * need to be translated to 0x0 and 0x20000
> > > + */
> > > + if (mem->da == 0x90000 || mem->da == 0xB0000)
> > > + mem->da -= 0x90000;
> > > +
> > > + /* if translated TCM bank address is not valid report error */
> > > + if (mem->da != 0x0 && mem->da != 0x20000) {
> > > + dev_err(dev, "invalid TCM bank address: %x\n", mem->da);
> > > + return -EINVAL;
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +/*
> > > + * Given R5 node in remoteproc instance
> > > + * allocate remoteproc carveout for TCM memory
> > > + * needed for firmware to be loaded
> > > + */
> > > +static int parse_tcm_banks(struct rproc *rproc)
> > > +{
> > > + int i, num_banks;
> > > + struct zynqmp_r5_rproc *z_rproc = rproc->priv;
> > > + struct device *dev = &rproc->dev;
> > > + struct device_node *r5_node = z_rproc->dev->of_node;
> > > +
> > > + /* go through TCM banks for r5 node */
> > > + num_banks = of_count_phandle_with_args(r5_node,
> > BANK_LIST_PROP, NULL);
> > > + if (num_banks <= 0) {
> > > + dev_err(dev, "need to specify TCM banks\n");
> > > + return -EINVAL;
> > > + }
> > > + for (i = 0; i < num_banks; i++) {
> > > + struct resource rsc;
> > > + resource_size_t size;
> > > + struct device_node *dt_node;
> > > + struct rproc_mem_entry *mem;
> > > + int ret;
> > > + u32 pnode_id; /* zynqmp_pm* fn's expect u32 */
> > > +
> > > + dt_node = of_parse_phandle(r5_node, BANK_LIST_PROP, i);
> > > + if (!dt_node)
> > > + return -EINVAL;
> > > +
> > > + if (of_device_is_available(dt_node)) {
> > > + ret = of_address_to_resource(dt_node, 0, &rsc);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + ret = zynqmp_r5_pm_request_tcm(dt_node, dev,
> > &pnode_id);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + /* add carveout */
> > > + size = resource_size(&rsc);
> > > + mem = rproc_mem_entry_init(dev, NULL, rsc.start,
> > > + (int)size, rsc.start,
> > > + tcm_mem_alloc,
> > > + tcm_mem_release,
> > > + rsc.name);
> > > + if (!mem)
> > > + return -ENOMEM;
> > > +
> > > + mem->priv = (void *)(u64)pnode_id;
> > > + rproc_add_carveout(rproc, mem);
> > > + }
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +/*
> > > + * when loading firmware, load in needed DDR, TCM memory regions and
> > wire
> > > + * these into remoteproc core's carveouts
> > > + */
> > > +static int zynqmp_r5_parse_fw(struct rproc *rproc, const struct firmware
> > *fw)
> > > +{
> > > + int ret;
> > > +
> > > + ret = parse_tcm_banks(rproc);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + ret = parse_mem_regions(rproc);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + ret = rproc_elf_load_rsc_table(rproc, fw);
> > > + if (ret == -EINVAL) {
> > > + /*
> > > + * resource table only required for IPC.
> > > + * if not present, this is not necessarily an error;
> > > + * for example, loading r5 hello world application
> > > + * so simply inform user and keep going.
> > > + */
> > > + dev_info(&rproc->dev, "no resource table found.\n");
> > > + ret = 0;
> > > + }
> > > + return ret;
> > > +}
> > > +
> > > +/* kick a firmware */
> > > +static void zynqmp_r5_rproc_kick(struct rproc *rproc, int vqid)
> > > +{
> > > + struct sk_buff *skb;
> > > + unsigned int skb_len;
> > > + struct zynqmp_ipi_message *mb_msg;
> > > + int ret;
> > > +
> > > + struct device *dev = rproc->dev.parent;
> > > + struct zynqmp_r5_rproc *z_rproc = rproc->priv;
> > > +
> > > + if (of_property_read_bool(dev->of_node, "mboxes")) {
> > > + skb_len = (unsigned int)(sizeof(vqid) + sizeof(mb_msg));
> > > + skb = alloc_skb(skb_len, GFP_ATOMIC);
> > > + if (!skb)
> > > + return;
> > > +
> > > + mb_msg = (struct zynqmp_ipi_message *)skb_put(skb,
> > skb_len);
> > > + mb_msg->len = sizeof(vqid);
> > > + memcpy(mb_msg->data, &vqid, sizeof(vqid));
> > > +
> > > + skb_queue_tail(&z_rproc->tx_mc_skbs, skb);
> > > + ret = mbox_send_message(z_rproc->tx_chan, mb_msg);
> > > + if (ret < 0) {
> > > + dev_warn(dev, "Failed to kick remote.\n");
> > > + skb_dequeue_tail(&z_rproc->tx_mc_skbs);
> > > + kfree_skb(skb);
> > > + }
> > > + } else {
> > > + (void)skb;
> > > + (void)skb_len;
> > > + (void)mb_msg;
> > > + (void)ret;
> > > + (void)vqid;
> > > + }
> > > +}
> > > +
> > > +static struct rproc_ops zynqmp_r5_rproc_ops = {
> > > + .start = zynqmp_r5_rproc_start,
> > > + .stop = zynqmp_r5_rproc_stop,
> > > + .load = rproc_elf_load_segments,
> > > + .parse_fw = zynqmp_r5_parse_fw,
> > > + .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
> > > + .sanity_check = rproc_elf_sanity_check,
> > > + .get_boot_addr = rproc_elf_get_boot_addr,
> > > + .kick = zynqmp_r5_rproc_kick,
> > > +};
> > > +
> > > +/**
> > > + * event_notified_idr_cb() - event notified idr callback
> > > + * @id: idr id
> > > + * @ptr: pointer to idr private data
> > > + * @data: data passed to idr_for_each callback
> > > + *
> > > + * Pass notification to remoteproc virtio
> > > + *
> > > + * Return: 0. having return is to satisfy the idr_for_each() function
> > > + * pointer input argument requirement.
> > > + **/
> > > +static int event_notified_idr_cb(int id, void *ptr, void *data)
> > > +{
> > > + struct rproc *rproc = data;
> > > +
> > > + (void)rproc_vq_interrupt(rproc, id);
> > > + return 0;
> > > +}
> > > +
> > > +/**
> > > + * handle_event_notified() - remoteproc notification work funciton
> > > + * @work: pointer to the work structure
> > > + *
> > > + * It checks each registered remoteproc notify IDs.
> > > + */
> > > +static void handle_event_notified(struct work_struct *work)
> > > +{
> > > + struct rproc *rproc;
> > > + struct zynqmp_r5_rproc *z_rproc;
> > > +
> > > + z_rproc = container_of(work, struct zynqmp_r5_rproc, mbox_work);
> > > +
> > > + (void)mbox_send_message(z_rproc->rx_chan, NULL);
> > > + rproc = z_rproc->rproc;
> > > + /*
> > > + * We only use IPI for interrupt. The firmware side may or may
> > > + * not write the notifyid when it trigger IPI.
> > > + * And thus, we scan through all the registered notifyids.
> > > + */
> > > + idr_for_each(&rproc->notifyids, event_notified_idr_cb, rproc);
> > > +}
> > > +
> > > +/**
> > > + * zynqmp_r5_mb_rx_cb() - Receive channel mailbox callback
> > > + * @cl: mailbox client
> > > + * @mssg: message pointer
> > > + *
> > > + * It will schedule the R5 notification work.
> > > + */
> > > +static void zynqmp_r5_mb_rx_cb(struct mbox_client *cl, void *mssg)
> > > +{
> > > + struct zynqmp_r5_rproc *z_rproc;
> > > +
> > > + z_rproc = container_of(cl, struct zynqmp_r5_rproc, rx_mc);
> > > + if (mssg) {
> > > + struct zynqmp_ipi_message *ipi_msg, *buf_msg;
> > > + size_t len;
> > > +
> > > + ipi_msg = (struct zynqmp_ipi_message *)mssg;
> > > + buf_msg = (struct zynqmp_ipi_message *)z_rproc->rx_mc_buf;
> > > + len = (ipi_msg->len >= IPI_BUF_LEN_MAX) ?
> > > + IPI_BUF_LEN_MAX : ipi_msg->len;
> > > + buf_msg->len = len;
> > > + memcpy(buf_msg->data, ipi_msg->data, len);
> > > + }
> > > + schedule_work(&z_rproc->mbox_work);
> > > +}
> > > +
> > > +/**
> > > + * zynqmp_r5_mb_tx_done() - Request has been sent to the remote
> > > + * @cl: mailbox client
> > > + * @mssg: pointer to the message which has been sent
> > > + * @r: status of last TX - OK or error
> > > + *
> > > + * It will be called by the mailbox framework when the last TX has done.
> > > + */
> > > +static void zynqmp_r5_mb_tx_done(struct mbox_client *cl, void *mssg, int
> > r)
> > > +{
> > > + struct zynqmp_r5_rproc *z_rproc;
> > > + struct sk_buff *skb;
> > > +
> > > + if (!mssg)
> > > + return;
> > > + z_rproc = container_of(cl, struct zynqmp_r5_rproc, tx_mc);
> > > + skb = skb_dequeue(&z_rproc->tx_mc_skbs);
> > > + kfree_skb(skb);
> > > +}
> > > +
> > > +/**
> > > + * zynqmp_r5_setup_mbox() - Setup mailboxes
> > > + * this is used for each individual R5 core
> > > + *
> > > + * @z_rproc: pointer to the ZynqMP R5 processor platform data
> > > + * @node: pointer of the device node
> > > + *
> > > + * Function to setup mailboxes to talk to RPU.
> > > + *
> > > + * Return: 0 for success, negative value for failure.
> > > + */
> > > +static int zynqmp_r5_setup_mbox(struct zynqmp_r5_rproc *z_rproc,
> > > + struct device_node *node)
> > > +{
> > > + struct mbox_client *mclient;
> > > +
> > > + /* Setup TX mailbox channel client */
> > > + mclient = &z_rproc->tx_mc;
> > > + mclient->rx_callback = NULL;
> > > + mclient->tx_block = false;
> > > + mclient->knows_txdone = false;
> > > + mclient->tx_done = zynqmp_r5_mb_tx_done;
> > > + mclient->dev = z_rproc->dev;
> > > +
> > > + /* Setup TX mailbox channel client */
> > > + mclient = &z_rproc->rx_mc;
> > > + mclient->dev = z_rproc->dev;
> > > + mclient->rx_callback = zynqmp_r5_mb_rx_cb;
> > > + mclient->tx_block = false;
> > > + mclient->knows_txdone = false;
> > > +
> > > + INIT_WORK(&z_rproc->mbox_work, handle_event_notified);
> > > +
> > > + /* Request TX and RX channels */
> > > + z_rproc->tx_chan = mbox_request_channel_byname(&z_rproc-
> > >tx_mc, "tx");
> > > + if (IS_ERR(z_rproc->tx_chan)) {
> > > + dev_err(z_rproc->dev, "failed to request mbox tx channel.\n");
> > > + z_rproc->tx_chan = NULL;
> > > + return -EINVAL;
> > > + }
> > > +
> > > + z_rproc->rx_chan = mbox_request_channel_byname(&z_rproc-
> > >rx_mc, "rx");
> > > + if (IS_ERR(z_rproc->rx_chan)) {
> > > + dev_err(z_rproc->dev, "failed to request mbox rx channel.\n");
> > > + z_rproc->rx_chan = NULL;
> > > + return -EINVAL;
> > > + }
> > > + skb_queue_head_init(&z_rproc->tx_mc_skbs);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +/**
> > > + * zynqmp_r5_probe() - Probes ZynqMP R5 processor device node
> > > + * this is called for each individual R5 core to
> > > + * set up mailbox, Xilinx platform manager unique ID,
> > > + * add to rproc core
> > > + *
> > > + * @pdev: domain platform device for current R5 core
> > > + * @node: pointer of the device node for current R5 core
> > > + * @rpu_mode: mode to configure RPU, split or lockstep
> > > + * @core: Xilinx specific remoteproc structure used later to link
> > > + * in to cluster of cores
> > > + *
> > > + * Function to retrieve the information of the ZynqMP R5 device node.
> > > + *
> > > + * Return: 0 for success, negative value for failure.
> > > + */
> > > +static int zynqmp_r5_probe(struct platform_device *pdev,
> > > + struct device_node *node,
> > > + enum rpu_oper_mode rpu_mode,
> > > + struct zynqmp_r5_rproc **core)
> > > +{
> > > + int ret;
> > > + struct device *dev = &pdev->dev;
> > > + struct rproc *rproc_ptr;
> > > + struct zynqmp_r5_rproc *z_rproc;
> > > +
> > > + /* Allocate remoteproc instance */
> > > + rproc_ptr = devm_rproc_alloc(dev, dev_name(dev),
> > &zynqmp_r5_rproc_ops,
> > > + NULL, sizeof(struct zynqmp_r5_rproc));
> > > + if (!rproc_ptr)
> > > + return -ENOMEM;
> > > + rproc_ptr->auto_boot = false;
> > > + z_rproc = rproc_ptr->priv;
> > > + z_rproc->rproc = rproc_ptr;
> > > + z_rproc->dev = dev;
> > > + /* Set up DMA mask */
> > > + ret = dma_set_coherent_mask(dev, DMA_BIT_MASK(32));
> > > + if (ret)
> > > + goto error;
> > > + /* Get R5 power domain node */
> > > + ret = of_property_read_u32(node, "pnode-id", &z_rproc->pnode_id);
> > > + if (ret)
> > > + goto error;
> > > +
> > > + ret = r5_set_mode(z_rproc, rpu_mode);
> > > + if (ret)
> > > + goto error;
> > > +
> > > + if (of_property_read_bool(node, "mboxes")) {
> > > + ret = zynqmp_r5_setup_mbox(z_rproc, node);
> > > + if (ret)
> > > + goto error;
> > > + }
> > > + /* Add R5 remoteproc */
> > > + ret = devm_rproc_add(dev, rproc_ptr);
> > > + if (ret)
> > > + goto error;
> > > + *core = z_rproc;
> > > +
> > > +error:
> > > + return ret;
> > > +}
> > > +
> > > +/*
> > > + * called when driver is probed, for each R5 core specified in DT,
> > > + * setup as needed to do remoteproc-related operations
> > > + */
> > > +static int zynqmp_r5_remoteproc_probe(struct platform_device *pdev)
> > > +{
> > > + int ret, i;
> > > + struct device *dev = &pdev->dev;
> > > + struct device_node *nc;
> > > + enum rpu_oper_mode rpu_mode;
> > > + struct list_head *cluster; /* list to track each core's rproc */
> > > + struct zynqmp_r5_rproc *z_rproc;
> > > + struct platform_device *child_pdev;
> > > + struct list_head *pos;
> > > +
> > > + rpu_mode = of_property_read_bool(dev->of_node, "lockstep-mode")
> > ?
> > > + PM_RPU_MODE_LOCKSTEP : PM_RPU_MODE_SPLIT;
> > > + dev_dbg(dev, "RPU configuration: %s\n",
> > > + rpu_mode == PM_RPU_MODE_LOCKSTEP ? "lockstep" :
> > "split");
> > > +
> > > + /*
> > > + * if 2 RPUs provided but one is lockstep, then we have an
> > > + * invalid configuration.
> > > + */
> > > + i = of_get_available_child_count(dev->of_node);
> > > + if ((rpu_mode == PM_RPU_MODE_LOCKSTEP && i != 1) || i >
> > MAX_RPROCS)
> > > + return -EINVAL;
> > > +
> > > + cluster = devm_kzalloc(dev, sizeof(*cluster), GFP_KERNEL);
> > > + if (!cluster)
> > > + return -ENOMEM;
> > > + INIT_LIST_HEAD(cluster);
> > > +
> > > + ret = devm_of_platform_populate(dev);
> > > + if (ret) {
> > > + dev_err(dev, "devm_of_platform_populate failed, ret =
> > %d\n",
> > > + ret);
> > > + return ret;
> > > + }
> > > +
> > > + /* probe each individual r5 core's remoteproc-related info */
> > > + i = 0;
> > > + for_each_available_child_of_node(dev->of_node, nc) {
> > > + child_pdev = of_find_device_by_node(nc);
> > > + if (!child_pdev) {
> > > + dev_err(dev, "could not get R5 core platform
> > device\n");
> > > + ret = -ENODEV;
> > > + goto out;
> > > + }
> > > + ret = zynqmp_r5_probe(child_pdev, nc, rpu_mode, &z_rproc);
> > > + dev_dbg(dev, "%s to probe rpu %pOF\n",
> > > + ret ? "Failed" : "Able",
> > > + nc);
> > > + if (!z_rproc)
> > > + ret = -EINVAL;
> > > + if (ret)
> > > + goto out;
> > > +
> > > + put_device(&child_pdev->dev);
> > > + list_add_tail(&z_rproc->elem, cluster);
> > > + i++;
> > > + }
> > > + /* wire in so each core can be cleaned up at drive remove */
> > > + platform_set_drvdata(pdev, cluster);
> > > + return 0;
> > > +out:
> > > + /* undo core0 upon any failures on core1 in split-mode */
> > > + if (rpu_mode == PM_RPU_MODE_SPLIT && i == 1 && ret != 0) {
> > > + list_for_each(pos, cluster) {
> > > + z_rproc = list_entry(pos, struct zynqmp_r5_rproc,
> > elem);
> > > + if (of_property_read_bool(z_rproc->dev->of_node,
> > "mboxes")) {
> > > + mbox_free_channel(z_rproc->tx_chan);
> > > + mbox_free_channel(z_rproc->rx_chan);
> > > + }
> > > + }
> > > + }
> > > + return ret;
> > > +}
> > > +
> > > +/*
> > > + * for each core, clean up the following:
> > > + * single rproc entry
> > > + * mailbox tx, rx
> > > + */
> > > +static int zynqmp_r5_remoteproc_remove(struct platform_device *pdev)
> > > +{
> > > + struct list_head *pos, *cluster = (struct list_head *)
> > > + platform_get_drvdata(pdev);
> > > + struct zynqmp_r5_rproc *z_rproc = NULL;
> > > +
> > > + list_for_each(pos, cluster) {
> > > + z_rproc = list_entry(pos, struct zynqmp_r5_rproc, elem);
> > > +
> > > + mbox_free_channel(z_rproc->tx_chan);
> > > + mbox_free_channel(z_rproc->rx_chan);
> > > + }
> > > + return 0;
> > > +}
> > > +
> > > +/* Match table for OF platform binding */
> > > +static const struct of_device_id zynqmp_r5_remoteproc_match[] = {
> > > + { .compatible = "xlnx,zynqmp-r5-remoteproc", },
> > > + { /* end of list */ },
> > > +};
> > > +MODULE_DEVICE_TABLE(of, zynqmp_r5_remoteproc_match);
> > > +
> > > +static struct platform_driver zynqmp_r5_remoteproc_driver = {
> > > + .probe = zynqmp_r5_remoteproc_probe,
> > > + .remove = zynqmp_r5_remoteproc_remove,
> > > + .driver = {
> > > + .name = "zynqmp_r5_remoteproc",
> > > + .of_match_table = zynqmp_r5_remoteproc_match,
> > > + },
> > > +};
> > > +module_platform_driver(zynqmp_r5_remoteproc_driver);
> > > +
> > > +MODULE_AUTHOR("Ben Levinsky <ben.levinsky@xxxxxxxxxx>");
> > > +MODULE_LICENSE("GPL v2");
> > > --
> > > 2.17.1
> > >