Re: [PATCH v13 2/8] mtd: rawnand: rockchip: NFC drivers for RK3308, RK2928 and others

From: Johan Jonker
Date: Mon Nov 02 2020 - 08:11:39 EST


Hi,

On 11/2/20 2:07 PM, Miquel Raynal wrote:
> Hi Johan, Yifeng
>
> Johan Jonker <jbx6244@xxxxxxxxx> wrote on Mon, 2 Nov 2020 13:57:56
> +0100:
>
>> Hi Yifeng,
>>
>> Don't poke with "ecc->bytes" ones it is set in rk_nfc_ecc_init(). It
>> will not be noted by the MTD frame work or userspace. I think there's
>> currently no way to let the user know that a different ECC must be used.
>> Neither can the user set ECC on the fly.
>>
>> Example R/W flow:
>>
>> nand_select_target()
>> chip->ecc.write_page_raw()
>> chip->ecc.write_page()
>>
>> [..]
>>
>> chip->ecc.read_page_raw()
>> chip->ecc.read_page()
>> nand_deselect_target()
>>
>> A write/read with:
>>
>> rk_nfc_read_page_hwecc()
>> rk_nfc_write_page_hwecc()
>>
>> or
>>
>> rk_nfc_read_page_raw()
>> rk_nfc_write_page_raw()
>>
>> must end up with the same result. If we can't archive that, then we
>> shouldn't offer RAW mode to the user for now. If Miquel agrees you
>> should just get the driver ready now without these 2 functions and round
>> things up.
>
> What about just not supporting the BootROM area if it was marked
> "reserved" by the BRom in the DT?

Should we just fill the buffers with '0xff' for boot blocks?

>
> Raw accessors is really a nice and basic feature that I would like to
> have in every new driver.
>
> Thanks,
> Miquèl
>