[PATCH 3/4] ARM: dts: aspeed: ast2600-evb: Adjust SPI flash configuration

From: Chin-Ting Kuo
Date: Mon Nov 02 2020 - 02:53:04 EST


- Enable FMC CS1 and SPI2 CS0 SPI NOR flashes since both of
these two flashes are mounted on AST2600 EVB by default.
- Remove spi-max-frequency setting: 50MHz is usual SPI bus
frequency adopted on AST2600 EVB which has already been
configured in aspeed-g6.dtsi.

Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/aspeed-ast2600-evb.dts | 26 ++++++++++++++++++++----
1 file changed, 22 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index 8d0f4656aa05..5a2e4612d155 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -96,12 +96,11 @@

&fmc {
status = "okay";
+
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
- spi-max-frequency = <50000000>;
-
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
@@ -133,18 +132,37 @@
};
};
};
+
+ flash@1 {
+ status = "okay";
+ m25p,fast-read;
+ label = "fmc0:1";
+ };
};

&spi1 {
status = "okay";
+
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;

flash@0 {
status = "okay";
m25p,fast-read;
- label = "pnor";
- spi-max-frequency = <100000000>;
+ label = "spi1:0";
+ };
+};
+
+&spi2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default>;
+
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "spi2:0";
};
};

--
2.17.1