Re: [PATCH V9 0/5] Intel Platform Monitoring Technology

From: Lee Jones
Date: Thu Oct 29 2020 - 11:16:42 EST


On Wed, 28 Oct 2020, David E. Box wrote:

> Intel Platform Monitoring Technology (PMT) is an architecture for
> enumerating and accessing hardware monitoring capabilities on a device.
> With customers increasingly asking for hardware telemetry, engineers not
> only have to figure out how to measure and collect data, but also how to
> deliver it and make it discoverable. The latter may be through some device
> specific method requiring device specific tools to collect the data. This
> in turn requires customers to manage a suite of different tools in order to
> collect the differing assortment of monitoring data on their systems. Even
> when such information can be provided in kernel drivers, they may require
> constant maintenance to update register mappings as they change with
> firmware updates and new versions of hardware. PMT provides a solution for
> discovering and reading telemetry from a device through a hardware agnostic
> framework that allows for updates to systems without requiring patches to
> the kernel or software tools.
>
> PMT defines several capabilities to support collecting monitoring data from
> hardware. All are discoverable as separate instances of the PCIE Designated
> Vendor extended capability (DVSEC) with the Intel vendor code. The DVSEC ID
> field uniquely identifies the capability. Each DVSEC also provides a BAR
> offset to a header that defines capability-specific attributes, including
> GUID, feature type, offset and length, as well as configuration settings
> where applicable. The GUID uniquely identifies the register space of any
> monitor data exposed by the capability. The GUID is associated with an XML
> file from the vendor that describes the mapping of the register space along
> with properties of the monitor data. This allows vendors to perform
> firmware updates that can change the mapping (e.g. add new metrics) without
> requiring any changes to drivers or software tools. The new mapping is
> confirmed by an updated GUID, read from the hardware, which software uses
> with a new XML.
>
> The current capabilities defined by PMT are Telemetry, Watcher, and
> Crashlog. The Telemetry capability provides access to a continuous block
> of read only data. The Watcher capability provides access to hardware
> sampling and tracing features. Crashlog provides access to device crash
> dumps. While there is some relationship between capabilities (Watcher can
> be configured to sample from the Telemetry data set) each exists as stand
> alone features with no dependency on any other. The design therefore splits
> them into individual, capability specific drivers. MFD is used to create
> platform devices for each capability so that they may be managed by their
> own driver. The PMT architecture is (for the most part) agnostic to the
> type of device it can collect from. Software can determine which devices
> support a PMT feature by searching through each device node entry in the
> sysfs class folder. It can additionally determine if a particular device
> supports a PMT feature by checking for a PMT class folder in the device
> folder.
>
> This patch set provides support for the PMT framework, along with support
> for Telemetry on Tiger Lake.
>
> Changes from V8:
> - Rebase on 5.10-rc1
> - Add missing changes in MFD patch from V7 that were accidentally
> dropped in V8

Which changes are those?

Do I need to re-review?

> - Remove error message when unsupported capability found. Avoids
> unnecessary noise on some systems.

--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog