[PATCH 10/11] arm64: dts: qcom: msm8992: Add USB support

From: Konrad Dybcio
Date: Mon Oct 05 2020 - 11:03:53 EST


This is a very basic dwc3 configuration (no PHYs yet),
but it works.

Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8992.dtsi | 31 +++++++++++++++++++++++++++
1 file changed, 31 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 81426577f2bd..0c422af47917 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -242,6 +242,37 @@ frame@f9028000 {
};
};

+ usb3: usb@f92f8800 {
+ compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ reg = <0xf92f8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+ clock-names = "core", "iface", "sleep", "mock_utmi", "ref", "xo";
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <120000000>;
+
+ power-domains = <&gcc USB30_GDSC>;
+ qcom,select-utmi-as-pipe-clk;
+
+ dwc3@f9200000 {
+ compatible = "snps,dwc3";
+ reg = <0xf9200000 0xcc00>;
+ interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ maximum-speed = "high-speed";
+ dr_mode = "peripheral";
+ };
+ };
+
sdhc_1: sdhci@f9824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
--
2.28.0