Re: [PATCH 1/2] usb: serial: qmi_wwan: add Cellient MPL200 card

[Johan Hovold]

On Sun, Oct 04, 2020 at 08:30:42PM +0200, Wilken Gottwalt wrote:
> On Sun, 04 Oct 2020 17:29:38 +0200
> Bjørn Mork <bjorn@xxxxxxx> wrote:
> 
> > Wilken Gottwalt <wilken.gottwalt@xxxxxxxxxxx> writes:
> > 
> > > Add usb ids of the Cellient MPL200 card.
> > >
> > > Signed-off-by: Wilken Gottwalt <wilken.gottwalt@xxxxxxxxxxx>
> > > ---
> > >  drivers/net/usb/qmi_wwan.c | 1 +
> > >  1 file changed, 1 insertion(+)
> > >
> > > diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
> > > index 07c42c0719f5..0bf2b19d5d54 100644
> > > --- a/drivers/net/usb/qmi_wwan.c
> > > +++ b/drivers/net/usb/qmi_wwan.c
> > 
> > This is not a 'usb: serial' driver. Please resend with a less confusing
> > subject prefix.
> > 
> > > @@ -1432,6 +1432,7 @@ static const struct usb_device_id products[] = {
> > >  	{QMI_GOBI_DEVICE(0x1199, 0x901b)},	/* Sierra Wireless MC7770 */
> > >  	{QMI_GOBI_DEVICE(0x12d1, 0x14f1)},	/* Sony Gobi 3000 Composite */
> > >  	{QMI_GOBI_DEVICE(0x1410, 0xa021)},	/* Foxconn Gobi 3000 Modem device (Novatel
> > > E396) */
> > > +	{QMI_FIXED_INTF(0x2692, 0x9025, 4)},	/* Cellient MPL200 (rebranded Qualcomm
> > > 0x05c6) */ 
> > >  	{ }					/* END */
> > >  };
> > 
> > 
> > This table is supposed to be organized by device type.  The last section
> > is for Gobi2k and Gobi3k devices.  Please try to put new devices into
> > the correct section.
> 
> Oh sorry, looks like I got it mixed up a bit. It was my first attempt to submit
> a patch set. Which is the best way to resubmit an update if the other part of
> the patch set gets accepted? The documentation about re-/submitting patch sets
> is a bit thin.

Just send these as individual patches (not a series) as they are
independent and go through separate trees.

Also, I never received the USB serial patch, only this one, so you need
to resend both anyway.

Johan